How to use a walk behind floor scrubber, and what are the precautions for using a small walk behind

1. Check the storage capacity.

At the end of each work, check the capacity of the battery and decide whether to charge it so as not to affect the next day's work.

2. Clean the sewage tank.

After the work is over, the sewage should be emptied and the sewage tank should be cleaned, and the sewage should not be left in the sewage tank, otherwise the service life of the suction motor will be affected.

3. Do not leave cleaning agent.

At the end of each day's work, it is best to use up the cleaning agent in the clean water tank, and do not let the liquid stay in the tank for a long time.

4. Lift the sucker and squeeze the stub.

After the work is completed, the suction squeegee must be lifted to maintain the elasticity and life of the rubber strip.

5. Clean the filter.

There is a filter in the water valve, and the filter should be removed and cleaned frequently to ensure that the water discharge system is unblocked.

Note: There may be processing residues left in the clean water tank of the new machine, so the frequency of cleaning the filter should be increased at the beginning of use.

6. If there is an alarm, it needs to be charged.

When the power is lower than the specified value during use, the machine will automatically stop working. Charging must be completed continuously, ordinary lead-acid batteries should check the battery liquid once a week, and add "distilled water" in time for lack of liquid, the lack of liquid in the battery will seriously affect the battery life, and the battery life will also be affected by the termination of charging, please note!

Generally, you can just push it. If it's not well balanced, that's the machine. Too much pressure on the ground. You can adjust it manually.

According to the power supply method, it can be divided into: AC floor scrubber (also called wire type floor scrubber), DC type floor scrubber (also called battery type floor scrubber); According to the operation form of the floor scrubber, it can be divided into: folding, hand-pushed, and ride-on floor scrubber;

The working principle and components of the floor scrubber The floor scrubber is a fully automatic cleaning equipment that integrates spraying, scrubbing and sewage. It is equipped with a brush plate motor, brush plate, and water suction motor. The main components are brush plate, clean water tank, sewage tank, power supply (wire or charging battery), control part, water suction motor, water suction paddle, main wheel, universal wheel, drive motor (fully automatic) and so on.

Floor scrubbers can solve the following problems:

Health and hygiene issues, effectively reduce environmental dust.

Environmental protection issues.

Effectively reduce the loss of dust and garbage on the floor.

Damage to the product due to dust.

Avoid possible personal injury.

Dust can cause damage to plant equipment.

Floor scrubbers can create profits (cost savings) for users

Work 6 to 40 times faster than manual work.

Effectively reduce dust in the environment (save time and money, no need to clean products frequently, maintain machines, clean regularly, etc.).

Boost work efficiency (clean and clean aisles = move faster and be more efficient) More active cleaners (machines work better than human hands) Last but not least, a clean and tidy environment, is.

The most effective and dynamic marketing tool.

1.Walk-behind floor scrubbers are suitable for flat floors, so we should sweep the large garbage on the ground before using them;

2.Be careful not to add too much detergent or solid detergent;

3.When there is no power, charge it first before using it;

4.Timely dumping of sewage and foam in the sewage tank;

5.Daily maintenance can not be forgotten;

Notes: <>

Walk-behind floor scrubbers.

Before using the walk-behind floor scrubber, pay attention to whether the surroundings are safe;

When using the walk-behind floor scrubber, pay attention to whether there is still sewage in the sewage tank that has not been cleaned;

Pay attention to the power meter before using the walk-behind floor scrubber, and charge it first when there is no power;

The use of the hand-pushed trembling banquet washing machine pays attention to whether the ground is sharp and protruding, and avoids it to protect the floor scrubber;

When using the hand-pushed floor scrubber, pay attention to whether the sewage in the sewage tank is almost full, and clean up the leakage chain in time;

Walk-behind floor scrubbers.

1；After the work is completed, rinse the sewage tank and the inside of the clean water tank with clean water to avoid the garbage staying for a long time and blocking the water hole.

2；Lift the brush disc and remove the brush disc and remove the garbage and debris that adhere to the bristles before rinsing it well.

3；Lift the suction blade by pulling the cord, clean up the garbage remaining in the absorbent strip and the suction mouth, and then rinse it with clean water.

4；Open the top cover of the sewage tank maintenance, check whether there is any garbage in the liquid level float valve at the suction port and clean it in time.

5；Remove the suction pipe and drain hose, inspect the inner wall of the hose for debris and other debris, and clean it up.

6；Check whether the battery is fully charged through the operation panel, and charge it in time if the battery is lower than the set capacity.

7；After the above items are checked, the brush plate and absorbent paddle should be installed and restored in time and then turned off the power to avoid power loss.

8；Regularly inspect the absorbent adhesive strip, absorbent hose, sewage hose and related accessories for damage and replace the accessories in time.

9；When charging the battery, the wire can not be directly connected, and the plug can be connected according to the regulations before the power supply can be connected.

The daily maintenance method of walk-behind floor scrubber can be cleaned by ultrasonic.

1. After cleaning with a walk-behind sweeper, the sewage of the sewage tank should be discharged first, and the inside of the sewage tank should be cleaned with clean water to prevent the stains in the sewage tank from settling.

2. Cleaning the dirt accumulated on the filter screen in the sewage tank will lead to the deterioration of the water absorption function of the sewage, which will affect the use effect.

3. When the floor scrubber is not in use for a long time, the suction squeegee assembly should be raised to leave the ground to prevent deformation due to long-term extrusion.

4. Regularly check whether the edge of the absorbent adhesive strip is damaged, if it is damaged, please reverse it or replace it to avoid affecting the effect of floor scrubbing.

5. Check whether the top of the battery is clean to prevent corrosion, and check whether the battery connection wire is loose or corroded, which affects the service life of the battery.

6. After the floor scrubber is used, it should be placed in a dry and ventilated environment to avoid the humid environment affecting the service life of the battery.

1. Improve efficiency: the hand-pushed floor scrubber scrubbers complete the washing and drying at the same time, and at the same time take the sewage and other pollution sources away from the site, the three-in-one step is in place, and the efficiency is more than 15 times that of manual cleaning; The optional brush plate pressurization device can increase the ground pressure of the brush plate by another 20kg after addition, and effectively deal with stubborn dirt;

2. Intelligent design, simple and easy to use: the humanized design of the hand-pushed floor scrubber is in line with the usage habits of Oriental people, one-button control, automatic cleaning, the operator only needs to push to grasp the direction, and can easily grasp it without professional knowledge, so that we can move towards intelligent cleaning The road becomes simple and feasible;

3. Strong and durable, the water-absorbing motor and wiper strip of the hand-pushed floor scrubber machine are imported from the United States, and the water absorption and wiping effect can be comparable to that of the imported machine, rubber wheels, silent and wear-resistant; At present, it has been applied by the majority of factories, communities, property management and other companies, and has been well received;

4. Ultra-low noise, easy and free: The walk-behind floor scrubber adopts a low-noise design to minimize the negative impact of the machine's work, so that you can work with peace of mind day and night, and establish a good working image while harvesting a clean environment.

First of all, before using the floor scrubber, you need to check whether the power of the floor scrubber is full, and then turn on the panel switch to install the needle plate, floor scrubber brush and absorbent squeegee. Secondly, open the water tank of the floor scrubber, fill the water tank with clean water, according to the ground stains, and add an appropriate amount of detergent, and then cover the water tank tightly. Gently step on the brush pedal, put down the brush plate and water squeegee, and then press the brush plate and water absorption switch, adjust the amount of water according to the degree of dirtiness of the ground, and adjust the speed of the floor scrubber.

After the cleaning is completed, first turn off the brush button, step on the brush pedal, lift the brush plate, and then when the water absorbent squeegee absorbs all the water on the ground, then turn off the water absorption motor button, and then close the floor scrubber key after all the machine functions are stopped; Then open the lid of the water tank, drain the sewage and clean water, and rinse the residue and filter inside the sewage tank with clean water.

After the work of the industrial floor scrubber is completed, the clean water tank should be emptied, otherwise the water that does not flow will become the first of bacteria. Empty and clean the sewage tank. In the process of using an electric floor scrubber, when the machine collects the mixture containing sludge, they tend to accumulate in the tank and emit an unpleasant odor.

Therefore, the tank of the electric floor scrubber must be cleaned with running water.

A floor scrubber will definitely work better than a traditional mop. The cleaning of the mop is not strong enough, and the dust and debris cleaned out must be disposed of together, which is troublesome to change the water halfway, which affects the efficiency, and will leave traces on the ground if the cleaning is not thorough. The floor scrubber is brushing + rinsing + mopping, and the cleaned stains and sewage can be pumped back into the water tank of the floor scrubber, and finally dry the ground, which is efficient and convenient.

As for whether it is suitable for you, you need to combine it with your own use environment. If the cleaning area is not large, in fact, the walk-behind floor scrubber is enough. Of course, if your shopping mall is positioned higher and pursues to improve its corporate image, you can also consider unmanned ones.

Generally, this kind of shopping mall has a large area, and at this time, using a hand scrubber is tantamount to holding a mop and mopping, which is very inefficient. Many unmanned floor scrubbers are divided into automatic transmission and manual transmission, which can be used as a hand-pushed floor scrubber (for example, Shanghai Gaoxian is an automatic standing driving gear, Wuhan Daoda is an automatic transmission hand-pushed gear) Nowadays, SLAM technology is becoming more and more mature, navigation and obstacle avoidance route planning is becoming more and more precise, and the welt cleaning effect is becoming more and more accurate.

From the Shanghai Cleaning Exhibition in April this year, it can be seen that many traditional floor scrubber brands have been eager to try in the field of unmanned floor scrubbers, and it can be expected that unmanned floor scrubbers may become the future development trend. After reading the above, I personally believe that new products can be optimistic about the future, but not overconfident, and at the same time, it is normal to be used to traditional products and have doubts about new products, but there is no need to be biased. In short, it's not a bad thing to have more understanding and more choices.

Walk-behind scrubbers don't work as well as ride-on scrubbers! Ride-on floor scrubbers are not as easy to use as driverless floor scrubbers! Whether it is practical or not depends on the venue, budget, etc.

1. To check the installation of the brush blade and the absorbent squeegee assembly, add water to the clean water tank and use a hose or bucket. Then add detergent to the tank, but with the right amount of defoamer.

2. The machine can be started, and it should be charged in time when the power is too low. The pressure and flow rate of the brush plate can be adjusted.

3. You can adjust the steering rod and hold the switch to adjust the speed to clean, and turn off the start button in time after the end of the scrubbing, and lift the brush plate to turn off the power.

Walk-behind floor scrubbers are mainly used to clean retail shops, hospitals or hotels, and are often found in airports, schools, and factories. Walk-behind floor scrubbers have good cleaning functions and are easy to operate, so you should be able to learn them quickly.