Ask for help Career options for college mold fresh graduates. I would appreciate your answers. Thank

Personally, I feel that the third company is the best, not only can you learn management knowledge, but also learn technology and other things, whether it works or not, you must try, don't people haven't said no, you first deny yourself, you can go best; The first and second company positions, in fact, are almost the same, good to sound is a technician, not good is to give those designers a hand, no matter which company wants you, in fact, it is very good, the individual originally graduated to a Taiwan-funded enterprise, the management of Taiwan-funded enterprises has a very strong Japanese style (although the reputation of Taiwan-funded enterprises is not good), although it is very tiring to do it inside, but it does learn a lot of things, and then resigned for personal reasons, and then worked in several private enterprises, I feel very uncomfortable, Not to mention whether the technology is good or not, you feel that the difference is very big in management, as soon as you enter the foreign-funded workshop, it is clean and bright, and all types of work are orderly, while most of our enterprises are messy on site, the machine is very dirty, and there is a lot of oil, it is difficult for people to believe that they can produce good products.

When you have a certain amount of experience and skills, then you can get closer to the management position, of course, these require you to learn and work hard. I hope mine can help you, hope.

It is recommended that you go to the second insurance point, Japanese companies are more strict, after entering it is recommended to start at the grassroots level, start with technology, and then contact a set of processes after you have experience and master all aspects of technology! Good luck!

It's good to learn auto repair, and now the employment prospects in the auto repair industry are very good, if you want to learn, you can come to us to see it here, here in Panyu City, Guangzhou.

As a college student majoring in mold who is about to graduate, how to become a mold designer?

How to become a qualified mold design engineer, the process will be very hard and lonely... As the saying goes, you can only see the rainbow if you endure loneliness, and no industry can be achieved overnight.

A little understanding of UG and CAD can give you a job as a draftsman in a mold company, but I don't think this kind of work will be of much significance to your future growth for the following reasons:

1. If you have just started to go out of the society and are determined to learn the mold, you must start from the most basic work (such as the mold workshop as a fitter apprentice), which can allow you to quickly understand the basic structure and assembly principle of the mold, and also understand the principle of all machining equipment, the advantages and disadvantages of the processing capacity and efficiency of each equipment, etc., this time is defined as 1-2 years.

2. In the year of being a mold apprentice, you need to learn the software well in your spare time, so that you can get started quickly, such as ug, it is recommended to buy a book, from beginning to end, systematically learn again, so that you have a full understanding of the software, which is very important.

3. After completing the accumulation of the above two points, you can start to look for an apprenticeship job in a design position, such as a two-dimensional drawing, commonly known as dismantling parts, and this working time is enough for 2 months. If you are a good learner, follow this route and you will soon become a designer.

Summary: Some people will say that the workshop is hard, don't want to do, if you have such an idea to give up this industry as soon as possible, want to become a design bull, no actual manufacturing experience at the bottom, the foundation is not firm, want to leap, the acceleration power will be insufficient, just like the current car, the want to super, in fact, it is very laborious.

Let's be a cartographer first! If you need to intern for a period of time, you can be apprenticed in about a year at most! Kunshan is a one-point pass.

It is recommended to work as a mold fitter in the stamping parts production factory, first understand the working principle of the mold, and the structure and working principle of each component of the mold, and also learn various problems in the production process, how to avoid the mold structure, about one to two years, and then design. A good designer needs more honing.

It's best to find a good mold factory, put fitters, wire cutting. Mecha, Spark, NC, it's better to learn everything, and it's very beneficial to do design in the future, that's how I came over.

First of all, it is necessary to understand the structure and processing technology of the mold, and it is best to find a mold factory to learn a mold fitter for half a year.

I do hardware continuous mold design, and the du I learned is material forming and control engineering, basic zhi

It's a professional counterpart, but dao I graduated out of the version to officially enter the right to take four years to change jobs everywhere, in fact, it's bad luck, if you just graduated with a job in the right to the counterpart, it is recommended that you don't care about the salary, entrepreneurship is a dream, but you can't take it as a goal to put unnecessary pressure on yourself, the first thing you have to do is to lay a solid professional foundation and then say, it generally takes three to five years, so if you want to start a business and do the industry, you need to study for so long, Of course, entrepreneurship can also not do this industry, do some relatively low-tech industries, the ultimate purpose of work is to make money, don't care which industry, and the mold industry people are the older the more popular, even if you have rich work experience, the difference between the age of twenty and forty is really called"Heaven and earth"So if you are looking for this industry, you must be psychologically prepared, for entrepreneurship, it is recommended that you consider this problem after three or five years!

You are very promising, you should be from the du thing mold enterprise is not zhi

Wrong, I'm also a dao

In this way, a very low salary when entering the mold back to the factory, I feel very want to do it, after entering the factory, you will find a lot of new knowledge that you have not learned in school at all, but I do not give up, after 3 months of work, the salary has increased significantly, and I now do the master work is very easy. Good luck with your industry!

The most suitable for you is mold design, and if you are looking for a job in Jiangsu, it will be Suzhou. However, there are too many people who make molds now, and the mechanical fresh graduates can't do anything, so the salary of the mechanical fresh graduates is not very good, which is lower than the starting point of the electronic class, and it should be about 1600 2400 in Suzhou. I've done mold design, and now I'm doing product mechanism design, and I don't think designers who start from the site generally can't design anything good.

Good luck!

You have to position yourself well.

First, you ask yourself if you like the choice.

Don't worry about how it will be to enter society.

A journey of a thousand miles begins with a single step.

You have to start all over again, there's nothing to get lost in.

Learn the same first, work in learning, everything is urgent, failure does not mean the future,,, it will not mean that it will not be in the future!!

Have faith ...

Belief is the driving force for success, and if you work to make money, you will never make money.

Only in a company where you have the final say in the technical aspect, your money will naturally come.

Jiangsu local development suggests that you go to Jiangnan, Suzhou, Wuxi, and Changzhou to at least challenge yourself.

It is not recommended that you go to northern Jiangsu, I am from Yangzhou, the salary is not too high, but the consumption is very low, the food is relatively rich, suitable for migrant workers who like to live in peace, disadvantages: slow pace.

There is an opportunity to come to Shanghai for development.

Of course, choosing is also a kind of being chosen, good luck.

I know very well that I still graduated loudly, and my education is lower than you, but I graduated in 05. Today's college students can in a year or two.

Capital preservation" is good.

I also suggest that when you graduate, as long as you can find a job you like, don't worry too much about the salary. You have just graduated and have no capital to talk about salary.

Personally, I suggest that you intern in the workshop for a period of time, as for the position, it's hard to say, find a job, Su Xichang can do it, these places are more developed.

I feel very lost, this is normal. Plastic mold parting in Shenzhen is ug to find a job. What kind of position is engaged in the mold industry, I think I should study design in a small mold company for 1-2 years, because the mold in the textbook is too far from the real mold.

In this way, you have experience, you have practical combat ability, and then you go to a large company to work as an engineer. The salary in Shenzhen is about 4500.

From your point of view, there is no planning in the career, first of all, you are studying the mold profession, and also engaged in a year and a half of work in the mold industry, just feel easy to make mistakes and choose to give up, I personally think this is very bad, the work is interconnected, if you do not have a strong will, make some achievements in the field you are familiar with, and decide to give up when encountering difficulties, after all, it is easiest for you to make achievements now is the mold industry that you have studied for many years. Every snake in this world bites, and that industry has its own difficulties.

As for you to communicate more people first, the key is to look at the attitude, just like a standing on the street, if you don't want to communicate with people so many people in front of you will not communicate, if you want to communicate more, now there are many ways to contact other people, the key to doing technology is to communicate and learn, you can continue to improve, such as "3D shoe model design always feels that it is easy to make mistakes, and I feel that I am doing it slowly" You can find a way to find someone to ask for advice to break through your technical bottleneck, In this way, you can not only communicate with people but also improve your skills, so why not be happy?

To sum up, I suggest that you can go to the road of mold again, and when you find a way to succeed, you can have good work, study and living habits, and you can choose to do what you "like" can also be very successful!

If you're like this, then you can do sales, but it's hard to do a good job in sales, but it's definitely the highest salary in the company, and it's easy to get started in this industry.

Certificates.

The various types of certificates that students can obtain at the school:

1.English Level A, B, Level 4, Level 6 2Computer Level 1 & Level 2 Cartographer Intermediate, Advanced.

3D Design Software Certification.

5.Fitter Intermediate, Advanced.

6.CNC lathes intermediate, advanced.

7.CNC milling intermediate, advanced.