How do Volkswagen wipers stand up? How does the wiper stand up

Hello! Glad for your question.

1. Wiper blade aging: two wiper blades are rubber products, which will be aged and hardened after a period of time, and it is more significant in winter. Most wiper blades are recommended to be replaced every one to two years.

2. There is a foreign object in the middle of the wiper blade: when the wiper is opened, there will be a sharp sound of friction between the wiper blade and the front windshield.

3. The installation angle of the two wiper arms is wrong: it will affect the wiper blades to jump on the windshield, then it will cause a sound. If the two wiper blades are normal, you need to adjust the angle of the wiper arm so that the two wiper blades are perpendicular to the windshield plane.

The steps to get the wipers up are:

1. Turn off the vehicle when the wiper is working.

Within seconds, push the wiper switch to wash mode and hold it for more than 2 seconds.

3. The wiper will automatically turn to the middle of the windshield, and then stand up manually.

4. When the wiper is reset, you need to gently put down the erected wiper first, then start the power supply, and turn on the wiper switch.

There are slight differences for different models.

Precautions

When the wiper is in the erected state, do not power the vehicle to the ON gear, do not ignite and carry out all the operations to start the wiper, otherwise it will have a negative impact on the motor, remember.

How to use the wipers

On rainy days, when raindrops fall on the window glass, the view in front of the car is quickly obstructed, and vehicles, pedestrians, and scenery become blurred. At this point, turn on the wipers and the front of the car will be clear.

If you drive the vehicle in rainy weather, the wipers are not used or the wipers fail to work properly, which is very detrimental to driving safety.

1. Before heavy rain, check whether the car wiper can work normally.

2. In heavy rain days, rapid and large raindrops hit the windshield glass, even if the wiper movement is fast, it is difficult to clean the raindrops, which affects the driver's sight, in order to ensure the safety of driving, should be stopped immediately.

There are four steps to set up the wipers: 1. Turn off the car; 2. Pull the wiper in the direction of the steering wheel; 3. The wiper automatically turns to the middle position of the windshield; 4. Manually stand up the wipers.

1. Press the start button first, you don't need to start the engine, and then press the engine button again to turn off after about 5 seconds of vehicle self-inspection.

Pull the wiper lever toward the steering wheel in seconds.

3. The wiper blades will automatically turn to the middle of the windshield.

4. Finally, manually stand up the wipers.

Precautions for wipers

1. There is a stubborn and hard dirt on the glass, which should be cleaned by hand. These things can easily injure the wiper blades, resulting in the wiper being unclean, and the motor of the wiper will also be affected.

2. When you need to lift the wiper blade for car washing and daily cleaning, you should gently hold the "back" of the wiper blade, and gently return it when you put it, and the wiper blade should not snap back.

3. When using it in winter, you should use an ice shovel to clean the ice ballast on the surface of the windshield first, so as not to increase the burden of the wipers.

1. To put up the wipers, the public only needs to hold the wiper fixing bracket and lift it.

2. In the high temperature summer and winter, the wiper brush of the vehicle needs to be erected. Because in the hot summer, if the car happens to be parked in an open-air parking lot exposed to the sun, the surface temperature of the front windshield of the car can reach more than 50 degrees. At this time, the wiper is close to the window glass, and it is easy to make the rubber of the wiper hot to deformation under long-term exposure, and it cannot play the function of stimulating and removing rainwater normally.

In the northern regions, winters often reach sub-freezing. If the wiper is not erected, it will freeze and freeze with the glass, which will be difficult to peel off, and it will also cause the rubber strip to deform, which will also make the wiper scrapped.

3. In addition, even if it is not because of the temperature problem, when parking outdoors for a long time, it is also recommended to put up the wiper to avoid excessive accumulation of dust, fallen leaves, bird droppings, etc., and it will not be glued to the window with the glass-water mixer when used again, affecting the line of sight.

Here's how to stand up a Volkswagen wiper machine:

Tool: Volkswagen volcanic lead speed.

1. First turn off the vehicle.

2. Then turn on the glass water switch within 10 seconds, and pull the wiper lever directly in your direction, of course, some are controlled by physical buttons.

3. After pressing the glass water switch, the wiper will automatically turn to the middle position of the windshield.

Why do you need to put your car wipers up when it's cold?

In the cold season, the temperature in the northern region can even reach minus twenty or thirty degrees, which adds a lot of trouble to the car. Many people don't have a parking space, so they have to put their car outside, and in order to prevent the wipers and windshield from freezing together, they can only stand up, which is the easiest and most effective way.

Strictly speaking, wipers are just rubber products, whether the temperature is too high or too low, it will increase its aging speed. By coincidence, it froze together with the windshield. If the owner starts it forcibly, it will have an impact on the glass and easily burn the motor.

If you want to repair it, you have to pay a lot of money.

When you first start the engine, in addition to the necessary hot car, do not force the wipers, let alone force them open. Wait until the water temperature returns to normal, then turn on the heater and use the temperature inside the car to melt the frost on the glass, and then use the glass water to remove it.

Volkswagen's wipers are used as follows:1. Volkswagen's wipers are generally a lever on the right side behind the steering wheel.

Move the lever in your direction, which is to spray the glass cleaner and activate the wipers, and stop as soon as you let go; 2.Turn the lever in the direction of the front window to turn on the wipers; 3.Turning the front window of the car is to increase the operating speed of the wipers, and steering forward is to further increase the scraping speed of the wipers.

Wipers, also known as wipers, water wipers, wipers or windshield wipers, are devices used to brush away raindrops and dust attached to the windshield of vehicles to improve the visibility of the driver and increase the safety of driving. Because of legal requirements, almost all cars are equipped with windshield wipers. Hatchbacks and recreational vehicles also have wipers in their rear windows.

In addition to cars, other means of transport are also equipped with wipers, such as trains and trams. Some engineering tools, such as cranes, are also fitted with wipers.

<> "In the process of using the car, the wiper erection is a common action, especially when washing the car, but many friends don't know how to erect it. So do you know how car wipers are erected?

First of all, we need to turn off the car, and within 10 seconds after the car turns off, turn on the switch of the car glass water and turn it on.

Then, we pull the lever of the wiper in our direction so that our wiper can stand up.

Generally speaking, when washing the car, you need to put up the wiper of the car, so that the cleaning will be more comprehensive, and then in the hot and high temperature guess summer or in the particularly cold winter, it is also necessary to erect the wiper of the vehicle.

In addition, some vehicles are parked outdoors for a long time, and the wipers are erected to avoid the accumulation of dust, fallen leaves, bird droppings and other debris.