How home network routers and dispensers connect

For many people, the use of the network is one of the things that must be done in daily life, in the network port.

There is only one time, the network allocation problem also arises, for how to find the network allocation method, today I will take you to see the settings of the network allocator.

There are two ways to set up a network allocator, which solve the network allocation problem from different perspectives.

Connection of the network distributor** - method.

1. Set up Level 2 routing.

1. How to connect two routers.

1. There is a telecom cat: the telecom cat --- router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

2. No telecom modem: network cable --- router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

Second, the setting method.

Before setting, please disconnect the 2WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP segment of the second router.

Recently, fans often ask about home network issues, and after communication, they find that most people are not clear about how to connect home network devices.

Today, I publish this article for novice friends who don't know how to connect. Master, please bypass this article.

I believe that after reading this article, even if you are a novice with zero foundation, you can easily get the network at home.

Common equipment and auxiliary materials for home network:

The most common equipment and auxiliary materials for home networks are: broadband modems, wireless routers, network cables, network modules, etc.

Internet access equipment is mainly desktop computers, laptops, mobile phones, TVs, etc.

1. Broadband modem (optical modem): optical fiber access to the user-end equipment.

The connection of the optical modem:

2. Router and its connection:

3. Network cable: basic connection method of home network

Isn't it easy?

If you have a new broadband or a new router at home, as long as you connect according to the above method and configure the router, you can rest assured that you can access the Internet.

I didn't go to the scene to see your network situation, and I didn't know about the IP address that you said would "change every once in a while".

So, I'm guessing that your landlord's allocator is an ordinary router or switch or other network product, and the network setting requirement for you is to dynamically obtain the address.

If I guessed correctly, you can do this, give it a try:

Wiring: (refer to the router manual) The network cable from the neighbor's house is plugged into the WAN end of the wireless router (no network cable is plugged in when setting), and the network cable of all computers is plugged into the LAN end of the router. Settings:

Refer to the router manual)1Set the WAN side of the router: Select Dynamic.

2.Set the LAN side of the router: Enable DHCP service3

Set the WLAN side of the router: Set the password, which is generally safer to use WPA now. Remember the name of the outgoing signal from the wireless router, and the password for backup.

4.Check to see if the address of your neighbor's router is the same as your wireless router, and if so, change your router address, for example, you can change yours. 5.

All computers plugged into the LAN port of the router have the NIC address set to automatically obtain. 6.Plug the network cable from your neighbor's house into the WAN end of the wireless router, turn on the wireless receiving device, search for your own signal, and enter the password.

All devices can share the Internet.

Give it a try. Thank you for your question.

1. The main thing is to set the IP address, because the wireless router generally turns on the DHCP function by default, the DHCP function is called the dynamic host configuration protocol, that is, the router can automatically assign IP address and other parameters to the computer;

2. So you can set it to automatically get the IP address, a router is connected to the cat, and then the router is followed by a switch (with 16 ports and above), which is not cheaper than connecting several routers, if the interface of the switch is not enough, you can also connect the switch behind the switch.

If you can't turn on the wireless, you can turn off the DHCP server and try it.

The landlord router is the main route, and there are two connection methods, and the main route is connected to the network cable.

1. If the LAN port of the self-routed route is used by the switch, the DHCP of the route should be turned off, and the IP allocation should not be carried out, so that the main route can perform DHCP. If your computer uses a static IP, you can access it without turning it off.

2. The estimated IP dialing mode needs to be set in the access WAN port, and the gateway is set on the computer as this route.

This depends on the network situation, generally adding a router needs to be set separately under the router to directly access the Internet, the following are the steps to set up the router:

1. Connect the router to the Internet.

Before there was no router, you could directly connect to the broadband through the computer, but now you need to use the router to share broadband Internet access, of course, you must first use the router to directly connect to the broadband. Therefore, the first step to do is to connect the line, connect the front-end broadband cable to the router (WAN port), and then connect the computer to the router (LAN port).

2. Set up a router to surf the Internet.

1. Open the browser, enter part of the earlier router in the address bar, and set a router management password in the pop-up window, which is used to manage the router (login interface) in the future. As follows:

2. Choose broadband dial-up Internet access: When the router was not used before, the stand-alone computer used the broadband connection of the computer system to dial up, and the operator gave a username and password. This is currently the most common way to access the Internet, and most home broadband is the Internet access method.

Or choose how you want to connect to the internet with auto-detection.

3. Set the wireless name and password (skip this step if it is a wired broadband router);

The wireless name can be set by yourself, and it is recommended to use a combination of letters and numbers. The wireless password is the identity credential when connecting to a wireless network, which can protect the wireless security of the router and prevent others from accessing the network.

4. After the setting is complete, click Confirm.

5. After confirmation, enter the main interface of the router, find the Internet settings, if the network status is checked, it means that the network connection is successful and you can go online.