Do Patek Philippe watches need to be maintained, and where is it good to take care of your watch?

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

In fact, there are many maintenance methods for Patek Philippe watches, and Patek Philippe watches will tell you a few tips in daily wear, which will not cause harm to the watch. That is, when you take off your Patek Philippe watch, it is best to put it in the watch case, and try not to put it close to the electrical appliances, because most electrical appliances have a magnetic field, and the watch will be affected by the magnetic field, which will lead to inaccurate time, so this is very important. In addition, although most watches have a waterproof function, Patek Philippe watches are the same, but because some watches are quartz watches, the strap is made of leather, so it is best to keep the Patek Philippe watch from contact with water, especially when taking a bath, it is best to remove the watch.

Due to the hot weather, hands often sweat, so it is best to dry the sweat in time to avoid the sweat from corroding the Patek Philippe watch, which will accumulate over time, and the sweat will always corrode the strap and cause damage to the strap.

There are generally two types of maintenance for Patek Philippe watches:

Daily maintenance: Patek Philippe's daily maintenance can only be the most basic maintenance, such as wiping and cleaning the external parts of the watch strap, dial, buckle, etc. In addition to wiping and cleaning at the beginning, it is also necessary to pay attention to the watch as far as possible away from friction, perfume, cosmetics, etc. during wearing, because these will cause scratches and discoloration of the watch.

In short, the daily maintenance of a Patek Philippe watch is mainly based on two points, one is to keep it clean, and the other is to keep it away from harm.

Professional maintenance: The professional maintenance of the watch is mainly for the movement. Because the movement of the watch contains many precision parts, the maintenance of the general watch movement such as oiling and cleaning needs to be operated by a professional repairer.

As for brands like Patek Philippe, either for after-sales maintenance or for the watch repair mechanism.

For mechanical watches, washing oil is the key to longevity. How often should a mechanical watch be serviced? This may seem like a simple question, but it's a difficult one to articulate.

In fact, there is no strict standard for this, the watch is like a car, and if it is time to recommend maintenance, it will not be a problem to drive for a few more months. As a general rule, cleaning once every 3-5 years is good for delaying the service life of the watch.

Wear the watch: If you wear the watch regularly or every day, then under frequent use, the wear and tear of the parts is relatively large, and the degree of wear is high, so it is best to maintain it regularly. On the other hand, if it is left unworn for a long time, the wear of the parts will be small, but the oil will become more and more condensed over time, and it is okay to extend the cycle in this case, but it needs to be maintained before wearing it again.

Large temperature differences can also shorten the maintenance cycle of the watch.

The sealing problem of the watch: the oil in the watch is easy to deteriorate and volatilize in poor conditions, it is very sensitive to the entry of foreign substances such as moisture, dust, fibers, etc., the movement is easy to rust, and if there are small impurities between the gears and parts, the damage to the movement will increase.

If the watch slows down and the full spring is still the same, then it is necessary to consider maintenance. There will always be some symptoms when you really need maintenance, which is the watch reminding you: if you don't repair it, I'll be finished.

Severe wear and tear may occur. There is no need to send it for maintenance only when it is slow, so that there is a certain amount of damage to the watch, and the increase in wear and tear will affect the lifespan.

Extend the life of the watch, maintenance cycle method: three prevention and one guarantee! The so-called three defenses are: anti-magnetic, waterproof, and shockproof. One supplement is: let the watch power sufficient. It corresponds to the three fears of watch maintenance: fear of magnetism, fear of tide, fear of falling!

1) When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, which is in contact with sweat for a long time, and is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.

4) Do not put the watch on the radio or TV to avoid magnetization.

5) Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a stationary state for a long time, so as to ensure the operation performance of the watch machine.

Aftermarket**Patek Philippe watch after-sales service center.

Regular maintenance is important during the daily wear of a Patek Philippe watch, which is crucial to the longevity of the Patek Philippe watch. It is best not to touch water and corrosive objects when wearing the watch, so as to protect the Patek Philippe watch, after all, the watch is more precious, if it is accidentally damaged, then the maintenance cost is relatively high. In addition, it is best not to place a Patek Philippe watch near a magnetic object, because a very magnetic object will greatly affect the accuracy of our Patek Philippe watch.

The maintenance of Patek Philippe watches depends on individual use, and is generally maintained once every 1 to 3 years. When using, it is still necessary to pay attention to waterproof, shockproof and anti-magnetic watches, which can only play a preventive role, and it is still necessary to avoid contact with water and magnetic fields and strong vibration when using, so as not to damage the movement and affect the service life.

Do not place your watch near magnetic objects such as radios and televisions to avoid affecting accuracy. Do not approach solvents, mercury, cosmetic sprays, detergents, adhesives or paints, camphor, otherwise the case, strap, etc. will be discolored, deteriorated or damaged.

The maintenance of mechanical watches is a bit annoying, generally follow a rule, if it is a general watch, 3-5 years can be, whether it is 3 years or 5 years, can be defined as follows: within 3 years, regardless of him, 3 years of the whole time, pay attention to the daily error, it is best to record the error of a week in a row, calculate the average value, and write it down. For example, the average is 12 seconds faster per day, and when the error of the watch becomes about 7 seconds faster per day on average, that is, when it is 5 seconds slower on average, go wash the oil.

Second, if your watch is a diver's watch, it can't be struck once every 2 years, because the rubber ring will age, if you don't maintain it, then it's best not to go into the water after 2 years, otherwise it will be easy to get into the water.

Thirdly, individual watch brands and technologies can extend the warranty period of the watch, for example, Omega's co-axial technology and Rolex's sealing technology can ensure normal operation for a long time, so there is no problem with the co-axial Omega and Rolex maintenance once every 10 years. The Arlanch's anchor escapement does not require lubrication and is made of an alloy with a high carbon content, which is lubricated with carbon within the alloy. If your watch is chronometer, it must be returned for after-sales service, otherwise the chronometer certification will practically cease to exist.

1.Care of the watch.

The service life of the watch is related to whether the wearer uses and maintains the watch correctly, such as wearing the watch for bathing, the appearance of the watch is dirty, the length of the strap is uncomfortable, and the use environment is harsh, etc., which can easily lead to damage to the watch and shorten the service life.

Mid-to-high-end watches should be maintained every two to three years, replacing waterproof components, testing the performance and power consumption of the movement, cleaning the movement, and maintaining the appearance, etc., such maintenance services will effectively extend the use time of your watch.

2.Water resistance of the watch.

The waterproof of the watch depends on the waterproof rubber ring on the glass, back cover, handle, etc. to meet the corresponding standards. All waterproof watches are stamped with the words "water resistant" or "water proof" on the case back. Watches without waterproof markings are only dustproof and should be protected from water.

The 30-metre (3atm, 3 atm) water-resistant watch can be used for daily grooming or rain, i.e. water droplets splash on the surface without any water pressure being applied to the watch. The 50-meter water resistance can be used for swimming and general household chores, and the 100-meter water resistance can be used for underwater work such as swimming and diving.

The aging of the waterproof rubber ring will affect the waterproof performance of the watch, so the waterproof rubber ring and handle (including the waterproof ring) of the watch should be replaced regularly according to the use of the watch. Quartz watches must be replaced with waterproof elements at the same time when changing the battery to ensure good waterproof performance.

Any waterproof watch should not be worn in a hot bath, sauna or in an environment with large temperature changes. Because the waterproof rubber ring is affected by temperature, it will expand and contract, voids will appear and accelerate aging, which will cause water ingress and water condensate in the surface, which will seriously damage the parts.

3.Watchband. The strap is divided into: ceramic belt, metal belt (tungsten titanium alloy belt, solid steel belt, solid copper belt, solid powder metallurgy steel belt, steel sheet belt, steel wire braided belt, etc.), belt, nylon braided belt, etc.

The ceramic strap is not easy to wear, non-allergic, and beautiful.

4.The "two defenses" of the watch

In the national standard, the anti-magnetic and shock-resistant performance standards are expressed by the "residual effect", which refers to the difference between the instantaneous daily difference of the watch before the test and the instantaneous day difference of the watch after the test.

Shockproof: When the watch accidentally falls from a height of 1 meter to a level hardwood surface, the residual effect does not exceed 2 seconds for quartz watches and 60 seconds for mechanical watches.

Anti-magnetic: When the watch is accidentally exposed to a magnetic field with a strength of 4800a m, the residual effect does not exceed the second for quartz watches, 30 seconds for mechanical men's watches (movement area greater than 314 square millimeters), and 45 seconds for mechanical women's watches.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition.

Hello, normally mechanical watches about 3-5 years also have to be maintained, with the use of the watch will cause the friction between parts to increase, strap corrosion or careless use caused by scratches and other factors caused by damage, you need to clean the strap of the watch and do some polishing treatment, so that the watch looks new, so regular maintenance is a must, it is recommended that you send it to a professional maintenance organization for regular maintenance.

Quartz watches do not need to be maintained except for regular battery replacement, mechanical watches are generally lubricated once every three years, and the movement should be cleaned once every five to six years and lubricated at the same time. Check the water resistance of your watch for every service.

Patek Philippe mechanical watches are wound every two weeks and wound every two weeks to ensure that the gears run smoothly. Do not set the date and day index at night, the mechanism that controls the date and the day of the week, there is a gap in activity at night, and do not break the original rules. Patek Philippe watch maintenance is the process of re-oiling the movement, because mechanical watches are very complex.

Therefore, users need to go through a professional watch repair center in the process of using the watch

It is recommended to check the use of the movement every 1-2 years, and it is best to do oil washing and maintenance every 3-5 years to prolong the service life of the mechanical parts of Audemars Piguet watches. Audemars Piguet watches that have not been maintained for more than 10 years, look normal on the surface, and do not pay special attention to the error when walking, once the fault is taken to repair, you will find that the internal movement parts have been worn out very badly, in this case, most of them cannot be repaired, and the accuracy of the watch after repair is difficult to reach the initial state.

The following operations are included in the watch comprehensive maintenance and repair program:

1.The movement is completely disassembled, cleaned, oiled, reassembled, adjusted, and functional;

2.repair or replacement of any worn or malfunctioning movement components;

Watch maintenance. 3.Replacement of the following parts: the crystal, crown, pushers, seals and batteries of the quartz movement (those included in the service price list, excluding specially shaped mineral glass and sapphire crystal);

4.Restore water resistance (in the case of a water-resistant model);

5.Refurbished case or bracelet (two-tone, gold-plated and PVD-plated case and bracelet, wash only).

How often should Patek Philippe watches be serviced, and it is best to maintain them every 2-3 years.

For local deep scratches on the case or strap, it is necessary to do local treatment before repairing, such as the case side of the case, and it is even possible to use a fine small file, more often with a stone stone, and then under a magnifying glass, carefully boring the deeper scratches.

It is not difficult to fix the scratches on the case strap with sandpaper yourself, as long as you are careful and steady. However, regarding the surface is a polishing process, it is necessary to use a cloth wheel polishing machine, and it is recommended to send it to the brand after-sales service or other watch repair institutions to find professionals to deal with it.