Patek Philippe watch after sales service, what to do if the watch screw falls off

Specifically, it depends on what is wrong with your watch. It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

It is recommended that you send it to a professional repair point or after-sales service for repair.

Here are some tips for you

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.

It is recommended that you go to a professional repair center to have your watch repaired.

It is recommended to send it to the after-sales service center for testing and repair.

<>Patek Philippe after-sales service center introduction:Each after-sales service center has more than 30 Patek Philippe watch repair experts, including 3 senior technical consultants, 10 senior technicians, and more than 10 junior and intermediate technicians.

Every professional who takes care of a Patek Philippe timepiece must have full respect for the timepiece itself, its history and its owner. We believe that every timepiece is as noble as its owner. We guarantee that your watch will be cared for and maintained with the utmost care and attention to detail, guaranteeing its enduring value and reliable performance for generations to come.

The first reason: the lack of power of the watch.

For example, the quartz watch, which is powered by electronics, may have insufficient power, and it will slow down when you walk slowly, and the error will become more and more obvious, resulting in the discovery that in fact, there will be errors in the case of sufficient power, but the error is small, and you can't find it! Mechanical watch, it is by the wind, elastic potential energy into kinetic energy, mechanical watch compared to quartz watch is not so punctual, mechanical watch movement is more complex, parts part, friction and loss will be more, kinetic energy loss is fast, in the case of insufficient elasticity of the spring plus the loss of parts, the error will be obvious to you found! So when the watch is not on time, first check whether your watch has enough power.

The second reason: whether the watch is magnetic.

If your watch is disturbed by magnetism and the time is not accurate, you can go to the watch repair shop for help, because there is a step to demagnetize the watch, then why is the watch magnetic, in fact, there are many magnetic fields around us, such as electrical appliances, electromagnetism, sometimes we come home, we may put the watch on the TV, stereo, etc.!

The third reason: the watch movement runs out of oil and needs to be maintained.

As I said in the first point, the friction between the movement parts of the watch will lose our power, and if the mechanical parts are aging, it will bring a lot of friction, and the watch needs to be brought to the watch store for maintenance.

The fourth reason: temperature and other external factors.

We can all go to the watch repair and maintenance shop, where there is a professional watch master, otherwise their own rash operation may make the problem more serious.

The mechanical watch is sometimes broken, how to repair the mechanical watch is sometimes broken? The teacher couldn't pick it up, so I had to change it to a new one.

Hello! If the hairspring is broken, it must be replaced, otherwise the hairspring will cause the phenomenon of fast timekeeping. It is recommended that you go to a professional Patek Philippe Service Center for replacement.

If you want to repair and maintain the watch, replace the watch accessories, or have any problems with the watch, you can click to consult.

You can take a look at the warranty card that came with your purchase, with the address and **. However, if the glass is broken, it is not covered by the warranty, and you can also choose to take it to some large professional and regular watch repair shops to replace it.

Generally, in the center of the city, or some relatively large shopping malls and high-end office buildings, these places will basically have professional and regular watch repair shops, which are more secure.

If the glass is worn, some friction or slight scratches, this situation is relatively simple, you can drop a few drops of water on the glass, and then squeeze a little toothpaste, wipe back and forth with a cotton ball, so that you can scratch off the scratches on the glass, so that the glass looks new. Remember not to use alcohol, as the glass will react with the alcohol and cause more serious chipping.

First of all, we need to know that there are generally two cases of broken crystal, one is broken corners, and the other is completely broken, and the glass must be replaced in both cases. The breakage of the watch glass will not only cause the watch to lose its sealing, which will further affect the water resistance. Judging from the material of the watch glass, the plastic glass used in old-fashioned watches will not burst, while the mineral glass glass, especially the popular sapphire glass, is prone to bursting.

1. First pull out the watch handle and stop walking. The reason why the watch is pulled out to stop the watch is to prevent the hands from scratching the dial and date disc by driving the glass shards, causing a second injury. And the ** of the dial is more expensive than the glass, whether it is repaired or replaced, it is a lot of pens.

2. Don't pull out the needles and jump the calendar, and don't try to clean the dial of glass debris yourself.

3. The watch must be squared, that is, the glass side down, placed in the box, but sent to the maintenance point. Try to avoid violent vibration and shaking during the repair.

Solution:

1. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe back and forth with a cotton ball to remove the scratches and make the watch glass as new.

2. If it is serious, you can polish it.

3. Find an official after-sales service center.

If the glass of the watch is broken, please stop using the watch and pull the crown apart to stop the watch from working, so as not to cause damage to the internal parts caused by the hands touching the glass of the watch glass when the watch is out of time, and it is recommended that you send it for repair immediately.

If the watch is dropped to the ground, or if it is bumped, it causes scratches, cracks, broken corners or even complete shattering of the watch. Generally, the first two can also be used exquisitely, but it only affects the aesthetics of the watch, but if it is the latter two, it is necessary to replace the watch mask, that is, the glass on the dial. **You need to take it to the master to check it first, the glass to see the specifications, size, material, the pointer to see the style and movement, the replacement is the original accessories, otherwise the installation can not be.

It doesn't matter if the watch is scratched or worn, but if the watch is completely broken, you should immediately pull out the head and stop the watch, then put the watch flat in reverse, and immediately send it to a regular watch repair center for repair and replacement. Be sure to avoid drastic ** on the way to the destination.

When your watch is accidentally dropped to the ground, or the glass of your watch is damaged due to various bumps, depending on the degree of damage, there may be scratches, cracks, broken corners, or complete breakage. If it is only scratches and cracks, it can be improvised, of course, the watch is not beautiful, and the glass of the watch must be replaced if the corners are broken and completely damaged.

Pull out the watch handle and let the watch stop.

You must not dial the hands or adjust the calendar quickly.

Lay your watch flat (preferably with the glass side down) until you reach a service center.

Do not shake or shake violently.

Tell the service center to be careful not to let glass chips damage the dial and watch hands during disassembly and repair.

The best and most direct way to break the watch glass is to take it for repair, the suggestion is to go to the formal authorized after-sales service center to repair, as far as I know, there are currently two watch repair points authorized by the brand in Beijing:

1.International Trade Center, Chaoyang District: Room 1102, Block D, Bloomage International Center, No. 6 Jianguomenwai Street.

2.Oriental Plaza, Dongcheng District: Room 808, 8th Floor, Block E1, Oriental Plaza, East Chang'an Street.

In addition, there are two cases of glass breakage:

One. Mild fragmentation:

For example, when the watch is accidentally scratched or cracked, although it can be used temporarily, it is already not waterproof or dustproof at this time, so it should be sent to the maintenance point for repair in time.

Two. Heavily fragmented:

This situation is more serious, and the following measures should be taken immediately.

1. Pull out the watch handle and let the watch stop.

2. Never dial the hands, set the calendar quickly, and don't try to remove the broken glass from the dial yourself.

3. The watch should be placed flat (preferably with the glass facing down), and the watch should be placed flat until it is sent to the watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. During maintenance, tell the maintenance master not to let glass chips hurt the dial and watch hands during disassembly and maintenance.

In general, the watch will not easily malfunction, and most of the malfunction problems are due to the improper use of the watch. Many people know very little about watch maintenance, so they do not do a good job of watch maintenance, which often leads to watch failure.

So, how do you avoid malfunction on your watch? Let's talk about it briefly.

1. During the wearing of the watch, it is inevitable that the sweat on the hands will corrode the case, so it is recommended that you often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat and affecting the appearance.

2. For watches with leather straps, leather will absorb moisture, in order to avoid corrosion, watch leather straps should try to avoid contact with high humidity, water-based or oily substances and cosmetics.

3. Watches and jewelry should be stored separately to avoid wear and tear between them.

Fourth, the watch should also avoid strong impact, but also try to prevent the temperature difference in the environment is too large, even if the watch is waterproof, please do not operate the watch function in water.

5. For watches that are not worn often, they should be stored in a box away from the magnetic field, and the watch should be wound at least once a month to ensure the normal operation of the movement to avoid the lubricating oil drying up.

Therefore, for a famous watch, the quality of maintenance will have a direct impact on its value.

The watch glass is broken! What should I do? Mild: When the watch is accidentally scratched or cracked, it needs to be replaced in a professional watch store as soon as possible, although it can be used temporarily, but it is not waterproof or dustproof, and it will affect the use of the watch with precision operation.

Severe: Bursts, crumbling corners and severe breakage, debris all over the dial, take immediate action as follows:

1. Stop the watch: pull out the watch handle to stop the watch, so that the pointer does not drive the glass chips and scratch the dial and the date disc.

2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

4. Send it to a professional watch shop for repair immediately.

We all know that water in a watch can cause a lot of damage to the movement, and a bump in the same watch will also cause damage to the internal parts of the movement. Therefore, bumps and moisture are the natural enemies of watches. So how should we avoid the situation of Kunlun watch bumps and water ingress?

After the watch arrives, you should read the instructions in detail, clearly understand the function and waterproofness of the watch, establish the concept of special watch, use the watch should have the concept of regular maintenance, and establish exclusive maintenance data for the watch.

The hot summer vacation is the most suitable for engaging in water activities, but water activities are risky for both people and watches. Although some watches have a waterproof watch, try not to wear it for water sports. This is because when the human body comes into contact with water, the body temperature will evaporate the water, and the fine water molecules will pass through the model with low water resistance, and come into contact with the mechanical parts inside the case, causing rust on the parts.

Regardless of the function of the diver's watch, it is best for consumers to send the watch to the watch store for oil washing and gasket replacement maintenance before engaging in water activities, so as to avoid the watch from entering the water and ruining the pleasure when engaging in leisure activities. If you have not been treated before engaging in leisure activities, and there is no major impact or deep diving during the activity, you can do your own personalized maintenance after returning home, using brushes, salads, dry cloths, and a small amount of water to do preliminary treatment of the watch, but in the treatment process, you must pay attention to whether there is residual water vapor in the case, and test whether the time error of the watch has increased significantly, if everything is normal, it can be sealed in a plastic bag or professionally stored in a dry oven.

Dufferi, if you repair the fallen flowers? Go directly to the after-sales service point, and you find the staff to repair it.