0x1002fed0 0X00000010 memory error referenced by the instruction, which cannot be read

The emergence of this problem is relatively common, and there are several main aspects:

If it has no effect on the computer or occasionally appears and leaves it alone, it will automatically disappear next time.

Viruses that are caused by viruses are completely anti-virus to the computer.

The hardware is mainly caused by incompatible memory modules, and the memory should be replaced if necessary.

system or other software.

Turn on or off IE, QQ, games, etc., the memory can not be read or written, the first thing that comes to mind may be the problem of this software, (the general solution is to uninstall and reinstall, upgrade or replace other versions, no, only uninstall the software, the problem can be solved).

1) If there is a problem with the system itself, install the official patch in time, and reinstall the system if necessary.

2) Problems with a certain software, here is mainly to look at the software running at boot, (use 360 and so on to check the software running on boot, remove the software that does not need to run), software conflicts, uninstall the problematic software.

There are two ways to deal with it: If it doesn't work, you can only restore or reinstall the system

Trial command exclusion.

Start Run Enter cmd -- Enter, and enter the following command in the command prompt.

for %1 in (%windir%\system32\*.dll) do s %1 enter.

When you're done, underneath the input.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

If you are afraid of typing mistakes, you can copy these two commands, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops.

Run regedit into the registry, under hkey local machine software, microsoft windows, currentversion, explorer, shellexecutehooks, there should only be one normal key, and delete the rest.

Li Duofu's original answer.

The likelihood of poisoning with this condition is rare.

I'm talking about solutions plus a little theory, if you want to learn theory, you can read a long article, (in fact, I don't know theory).

The software aspect is a program conflict, and the memory is allocated to an address, for example 0x4f7c000 this is a memory address, and when this address is used, the software conflict causes the memory to be unable to write in or read, and it will be out.

This is the case. If you have recently installed some new software, try uninstalling it, and there may be a problem with the system itself.

In terms of hardware, there is a problem with the memory, this address is bad in the memory and cannot be accessed, and the system reports an error when you use it.

The solution is generally soft and then hard, like the above said to remove the new software, if it doesn't work, reinstall the system, and use the disc to detect the memory, the general installation software has a memory detection tool, and the wrong replacement is on the line.

If there is a citation, please credit it from leedove

Some friends ask why there are many games all the time, because you don't usually use so much memory, that is to say, most of your 1G memory is idle at ordinary times, and the memory with a bad physical address is just in the free so it rarely reports an error, and the game occupies more memory, and a bad address is also used, so sometimes it is an error when it is opened, hehe.

Li Duofu's original answer.

1. See Know User 1056898.

0, wipe the memory module, it is best to use an eraser, 1, antivirus, clear Trojan, generally use 360, do not rule out poisonous, but it is unlikely, 2, thank you for the software you have installed, the game is installed and try again, if it is a disc, then try to change the disk, if it is a software to try again

3. Reinstall the system, 4. Detect the memory, then test the hard disk, and replace it if there is a problem, 5Update the system to the latest,(This one netizen has solved the problem after the update, let me add it next time)

6。Quote, from secretohayo - High Magician Level 6.

Haha,This problem was finally solved by me.,I also found out about this situation when I played yesterday.,And then today I went online to find answers.,A lot of it doesn't work.,Then I thought about the last time there was a game that was like that.,But then it was done.,It's so cool!

The method is: right-click on the game, select "Properties" - "Compatibility", and then put "Run this program in compatibility mode" on the hook, and then on the "Run with 256 colors" and "Disable visual style" hooks below, OK, and then run the game, mine is like this, you can use it, I don't know if the others are okay.

By: secretohayo - High Magician Level 6.

leedove