What are the benefits and disadvantages of car wraps

1. Security: This is an important performance related to security. The high-quality explosion-proof film is made of special polyester film as the base material, the film itself has strong toughness, and with special pressure-sensitive adhesive, when the glass encounters an accidental collision, the film will not splash and hurt people after the glass is broken.

The properties of glass determine its fragility, which is very dangerous during high-speed driving. Cars with high-quality explosion-proof film can firmly stick to glass fragments in the case of broken glass, so that they do not splash and avoid secondary injury to the occupants.

2. Explosion-proof and anti-theft:

A thief with a tool in his hand can smash glass in less than five seconds, enter the car, and loot its contents. Explosion-proof car film can extend the time it takes for criminals to break car window glass from a few seconds to nearly a minute. According to ** statistics, if the criminal cannot succeed within ten seconds, he will retreat and seek the next goal.

3. Anti-ultraviolet rays

Makes **drying** and accelerates **aging**. Further, the nucleic acids and proteins in the epidermal cells are denatured, resulting in symptoms such as acute dermatitis (i.e., sunburn). Ultraviolet rays are present all year round, and at the same time, ultraviolet rays in sunlight are the main cause of fading damage to the interior of your car, leather, and fabrics.

It is recommended that riders choose to paste high-quality car films, such as dragon film and 3m, which can block up to 99% of ultraviolet rays.

Fourth, anti-glare:

Many car owners have the following experience: when driving during the day, they often encounter glare trouble, and they feel blurred vision and distraction. When driving at night, the strong lights of the oncoming vehicle produce a harsh glare and cause deep discomfort.

In severe cases, it can also lead to traffic accidents. The anti-glare property of solar film refers to the fact that it can effectively reduce harsh glare. This creates a good driving vision for riders, relieves driving fatigue and improves driving safety.

Fifth, energy saving, environmental protection and economy

Now the oil price continues to improve, energy conservation and environmental protection has been paid attention to by everyone, reducing the load of air conditioning, improving fuel efficiency, and alleviating the load of the engine is the unanimous pursuit of everyone. You only need to turn on the air conditioner and turn off the air conditioner when the temperature in the car is suitable, because the high-quality solar film can effectively prevent the invasion of cold and warm air outside the car and keep the temperature in the car constant. At the same time, you will save money on gas.

1. Resist ultraviolet rays, reduce the possibility of fading the decoration and interior parts of the instrument panel, and also prevent ultraviolet rays from harming our body.

2. Heat insulation and sun protection. It effectively blocks the heat of infrared light in the sun, and has the effect of heat insulation and sun protection, so as to keep the temperature in the car constant, reduce the operation of air conditioning, and reduce fuel consumption.

3. Protect the privacy in the car, so that the outside of the car can not see the situation in the car.

4. Explosion-proof and splash-proof, effectively reducing the injury of the driver and passengers.

5. Anti-glare, effectively weakening the dazzling light.

The benefits of car wraps are:1. Heat insulation and sun protection. The film is a good barrier to a large amount of heat generated by infrared rays.

2. Ultraviolet insulation. The medium and long waves of ultraviolet rays can penetrate very thick glass, and most of the ultraviolet rays can be blocked by applying a heat insulation film. Preventing ** injuries can also reduce the aging of car interiors.

The disadvantages of car wrap are:1. Affect driving safety. Now many cars come with dark glass when they leave the factory, which can also play the role of film, if the owner sticks the car film outside the dark glass, the dark car film is easy to affect the car owner's line of sight.

The light is dim at night, and the owner can't see the situation outside the car clearly when driving, and it is easy to make mistakes in judgment and affect driving safety.

2. Inferior car film hurts the body. Some car owners have pasted inferior car film, the quality of this kind of car film is very poor, and there will be bulging phenomenon on the surface of the window. After the car film is exposed to the sun, it will emit toxic gases, and formaldehyde, benzene and other gases will affect the body of the car owner.

The benefits and disadvantages of car wrap are explained below:Benefits: 1. Prevent car glass from bursting and injuring people; 2. Isolate infrared and ultraviolet rays; 3. Protect the privacy of people in the car.

Disadvantages: 1. The dark film affects the safety of driving; 2. Inferior car film hurts the owner.

Pay attention to distinguish between good film and inferior film when applying film to the car, good film can be pasted, even if it is worth it, don't be harmed by cheap inferior film, and so hurt yourself and the people around you, and then regret it too late.

Before the film, it is necessary to check whether the installation of the window glass is intact and the integrity of the car glass to ensure that the subsequent film work can operate normally.

Be sure to cover the necessary parts of the car before applying the film to prevent liquid from penetrating. Sprayed cleaning fluids and lubricating fluids can affect trim parts such as automotive electronics and interior seats.

Wash the interior and exterior surfaces of the windows before applying the film (focusing on the interior surfaces and glass sealant areas). This is mainly to eliminate the dirt or other object construction quality problems between the heat insulation film and the window glass after the film, and ensure that the film and glass can be perfectly combined.

The membrane is pre-cut. Use a ruler to measure the size of the front and rear windshields, and cut the film according to the measured size. (The professional film mechanism is through the computer, which is tailored according to the model).

Spray the installation fluid. Dust spots can be avoided and corrosion at the edges can be reduced, resulting in the desired viscosity and better application results.

Dry roasting, wet roasting shaping. The film is dry-roasted first so that the film can be fully pre-shrunk. In order to further improve the adhesion of the heat insulation film, it is also necessary to wet bake and shape the heat insulation film.

Extrusion of the installation fluid: In the process of using the wiper to remove the installation fluid, try to scrape the installation fluid between the heat insulation film and the window glass, which can reduce the drying time of the heat insulation film and obtain a better bonding effect, overall performance and visual effect.

Check after sticking. "Three looks and one attention": look at the entire heat insulation film to see if there is any dust and bubbles, see whether the corners are firmly glued, and sit in the car to see if there are any places that affect the line of sight (especially the front windshield and side windshield). After the film, it is recommended not to raise or lower the glass arbitrarily within 48 hours.

The most important thing to pay attention to when applying the film is the use of hair dryer, if you blow this place for a long time, it will cause the glass to crack due to uneven heating. Therefore, it is necessary to find those professional authorized stores for the film, so that the quality of the film will be the best and the danger of glass cracking can be avoided.

The benefits and disadvantages of car wraps are as follows:

1. Benefits

Applying film to the car body can better protect the paint surface. If some small friction occurs in the car accidentally, the first thing to scratch is the outer protective film, which will not directly scrape the paint. It can reduce the oxidation effect to a certain extent, and with the protection of the car film, it can also reduce the corrosion of the paint surface by harmful substances such as acid rain, which not only effectively protects the car paint, but also makes the car paint long-lasting.

2. Disadvantages

The body film** is not cheap, and if you choose ***, it will be even more expensive. Poor quality car film not only has little protection, but also damages the paint surface. Car film has no fire protection effect, and when it encounters an open flame, the car film will even speed up the burning speed of the car.

Therefore, for driving safety, be sure to stay away from open flames.

Replacement after car wrap

Generally speaking, the replacement time of the car film used in the car is about 3 years. The replacement time of the automotive film is also determined by the quality of the automotive film. Some high-quality automotive films can last up to 5-10 years.

Because the quality of automotive film is different, the use time is also different. Car film is applied to the front and rear windshields, side windows, and sunroofs of vehicles. This protective film can play a very important role.

This protective film protects against the sun and also acts as a heat insulator.

The most important thing is to block the outside UV rays and protect the occupants of the car. According to the unidirectional perspective performance of the solar film, it can also play a role in protecting the privacy of people in the car. It is recommended that car owners choose a film with good light transmittance when choosing a car film.

If the light transmission of the film is not good, it will affect the driver's vision, especially when driving at night. At the same time, it is also necessary to choose a solar film that is insulated. A good solar film should have a good thermal insulation effect, which can prevent the entry of external ultraviolet rays, and at the same time, it can also play a role in heat insulation.

There are pros and cons to new car films, and we need to understand them clearly. Applying a dark film may obscure part of the view and interfere with the driver's judgment. Of course, the film has many benefits, as it can prevent ultraviolet rays and avoid the strong radiation from the sun that can overheat the inside of the car.

It can also provide a protection for the windshield to prevent accidental breakage and scratches, which is also good for safety. This is also a consideration for yourself, car lovers may also have requirements for aesthetics.

<> "What are the benefits and disadvantages of car wraps?

After buying a car, car owners want to put a protective film on their car, but it does not mean that the film is good for the vehicle, so what are the benefits and disadvantages of car film?

1. The disadvantage, after the film is pasted, it will reduce the light transmittance of the front windshield and reduce the clarity of the vehicle reflector. When it rains or fogs, it is easy to see clearly. When the driver looks at the road ahead through the front windshield, there is a possibility that there will be misalignment, resulting in less safety in driving.

2. Benefits, car film has a very good thermal insulation effect, in the hot summer, you don't need to turn on the air conditioner as soon as you enter the vehicle; It can also effectively prevent the front windshield from accidentally breaking and splashing out of the unshipped glass, making the driving vehicle safer. Ultraviolet rays are very harmful to people, and the car film can isolate part of the ultraviolet rays and mess the beam line into the car, which guarantees the safety of the people in the car.

3. It should be noted that vehicles that have just finished the film should pay attention to the fact that the glass cannot be lifted within a week or within three to five days. Because the film is wet pasted, there will be moisture between the film and the window when the vehicle finishes applying the film, and it is not completely bonded. If the window is raised and lowered frequently without being fully bonded, the friction will increase, and there is a risk that the film will be displaced, warped, wrinkled, blistered, and other problems.