What should I do if the two heads of the gas stove cannot be used at the same time?

If you don't have a vent, open the cabinet door under the gas stove.

Damn, I thought I was the only one I could use... No one knows?

What kind of stove are you using?

1. It is often caused by insufficient air intake of the gas stove. Stoves are generally embedded in cabinets, and if the cabinets are not empty, or if the air circulation is not enough, the gas will not be mixed with the air for the first time and the oxygen will not be enough and extinguished. 2. The general controller of the igniter of the gas stove is faulty, which will also cause the stove on both sides to not be used at the same time.

The solution to the gas stove at home can not be opened at the same time: check the pulse igniter after excluding the lack of gas and insufficient air intake, and see if the distance between the two pole piles is too far You can replace it, if you haven't done it, you can find a professional to replace it, and after replacing it yourself, you should use foam water to try whether there is any air leakage, and pay attention to the safety of operation. Common sense of safe use of gas stoves:

1. First of all, when purchasing, you must make sure that the gas source used at home is consistent with the gas source required for the stove you purchased, otherwise it cannot be used. 2. In order to ensure the safe use of the cooker, it is necessary to purchase the pressure reducing valve and trachea produced by regular manufacturers with quality assurance. 3. Users who use pipeline gas and natural gas must buy products produced by large domestic professional manufacturers, which can ensure that their safety performance and thermal efficiency are in a good condition.

The reason could be that the induction needle inside the gas stove is malfunctioning. When the gas stove is used for too long, the position of the induction needle of the gas stove will deviate, so when the gas stove can not be used on both sides together, the position of the induction needle must be carefully adjusted to restore the induction needle to normal state, so as to ensure that the induction needle of the gas stove is burned by the flame.

Nowadays, many families have embedded the gas stove into the kitchen cabinet, and when the gas stove is installed, there is no extra space for the cabinet punching, resulting in insufficient air intake of the gas stove, so that both sides of the gas stove can not be used at the same time, and then it is necessary to leave enough space for the gas stove. Gas stove maintenance tips: 1. Keep the bottom of the pot dry to avoid water dripping into the gas stove pores and causing rust and blockage of the stove.

2. Observe the fire on the stove head. If the fire is uneven and the flame is not strong, you can use a waste brush or steel needle. 3. Gently wipe the burner of the stove to ensure that the gas stove is working normally.

4. Do not use an oil-stained rag to clean and wipe the gas stove head pores to prevent the stove head pores from being blocked, resulting in insufficient gas supply and insufficient combustion strength. 5. It is best to strike while the iron is hot. Wipe while the stove is still very hot just after use, the oil stain is afraid of heat, and it will be more convenient to use the temperature of the stove to wipe.

1. It may be caused by the ignition needle being tilted. 2. If the stove is dirty and causes blockage, it will also lead to the situation that one of the dual gas stoves is ignited and one is not ignited. 3. If one side of the ignition is normal, and the other side is ignited, and you can't see the spark, or you don't hear the sound of da-da-da, it is possible that the line below is not in good contact or has fallen off.

5. This phenomenon will also occur when the double gas stove switch is broken or the solenoid valve is damaged. 6. In addition, if the induction needle has water or the induction needle is dirty, there will also be a situation where one of the dual gas stoves is ignited and one is not ignited.

The suggested solutions are:

1. If there is water in the sensor needle or the sensor needle is dirty, then you need to gently wipe the sensor needle with a dry towel.

2. If there is poor contact or falling off the line, you need to find professional maintenance personnel for maintenance.

3. The position of the ignition needle is inclined and the side of the Fotile gas stove cannot catch fire, in this case, the position of the ignition needle needs to be adjusted and the fire hole should be aligned.

4. If the micro switch is damaged or the electrical valve is damaged, then it is necessary to find a professional maintenance personnel for repair or replacement.

5. In addition, you can detect whether the stove is blocked, the stove is blocked, it will lead to the situation that it cannot be ignited, you can clean the stove, and then try to fire again.

My gas stove is two stoves can be turned on at the same time, if one is turned off, the other will also be followed by the fire extinguisher, what is the reason?

Hello dear, happy to answer your <>

The gas stove is two stoves that can be opened at the same time, such as closing one and the other is followed by fire extinguishing is the reason for flame-out protection, causing the stove on the extinguishing side to judge the flame extinguishing because it cannot sense combustion, and then automatically cut off the gas. This situation needs to be judged step by step:1

Check to see if the flame burns the induction needle. (There are generally two needles at the fire cover, one is ignited, one is inducted, and the spark is released when the fire is fired for the ignition needle, and the other is the induction needle) Under normal circumstances, the small fire flame in the inner circle burns to the induction needle, if it can't be burned, the following operations are judged: A adjust the corresponding small fire damper under the gas stove, so that the flame can burn to the induction needle, and the flame is blue at this time; b If the flame of the damper is yellow, it means that the air under the gas stove is insufficient, so you have to find a way to open a small hole near the damper to vent the air; c. If the flame is blue but the induction needle cannot be burned, then observe whether the air outlet hole in the corresponding direction of the small fire cover is blocked, and if it is blocked, clean it with a needle or thin wire; d If the small fire cover is not blocked, it still can't burn the induction needle, then the position or length of the induction needle is not suitable, and the slight provocation can not be burned to change the induction needle, and the gas accessories sold outside can be bought, about 5 yuan or so; 2.

If you can burn the induction needle, then most likely the pulse is broken, and the pulse needs to be replaced, and the market price of the gas stove pulse generally ranges from tens of yuan. Finally, I would like to explain that in terms of gas, if you don't know very well, it is recommended to find a maintenance master for maintenance, otherwise it is very dangerous to cause gas leakage! When one of the two gas stoves is turned on at the same time, the ignition may be caused by a malfunctioning ignition needle, such as a broken ignition pin or a poor contact.

However, it is also possible that the fire cover is dirty, because if there is too much dirt on the fire cover, the small holes on it will be blocked.

The reason why the two fire heads of the natural gas stove cannot be turned on at the same time:

1. Insufficient gas

The pressure and flow of the gas were not enough, so only one stove could be used, and it was not clear whether the questioner was using piped natural gas or a gas tank.

2. Insufficient air

The air inlet under the gas stove is too small, resulting in insufficient air intake, and the air inlet can only be adjusted manually.

If it is a built-in cabinet stove, the cabinet is too well sealed, resulting in no natural ventilation under the gas stove, which requires the cabinet to be modified, such as making a louver door.

It may be the location of the ignition needle, the insulating magnet of the high-voltage discharge needle and the oil leakage of the high-voltage wire, which may cause the two stoves to not be opened at the same time.

Maintenance of natural gas stoves.

1. Regularly clean the countertop and surroundings of the gas stove to keep the appearance clean, and the stove and the water table need to be at a certain distance.

2. Clean the dirt on the fire cover and fire hole of the gas stove once a week to effectively prevent the dirt from blocking the fire hole, causing backfire, and easily damaging the panel.

3. Regularly replace the battery of the gas stove (pulse ignition type), because the lighter and ion protector are used at the same time, which can help make the speed of ion protection faster and more sensitive, so it needs to be replaced once in about four to six months, but the specific replacement time depends on the frequency of use by customers.

1. The switch is not associatedIf the gas stove is a single-way high-pressure pulse igniter, no matter which side of the switch is pressed, the two stoves will ignite pulse sparks, and only the two-way igniter can control which side to press and which side will catch fire. At this time, it is necessary to see whether it is a single-way high-voltage pulse igniter, and if so, replace it with a two-way high-voltage pulse igniter.

2. The switch enters the water, and the two switches appear to be electrifiedWhen using the gas stove, it may accidentally cause the switch to enter the water, and the phenomenon of two stove switches connecting electricity, then the two stoves will be on fire at the same time when ignition, at this time, you can check whether the plug has water traces, pull it out to see if there are traces of rust, copper oxide is a conductive mu shed, if there is, remove the rust, blow it dry, and replace the switch.

Precautions for the use of gas stoves.

If the hose connection method is used between the gas stove and the pipe, it is necessary to check whether the hose is damaged and aged, and whether there is air leakage. The method is to apply with soap, continuously blow bubbles for the leakage point, the bending radius of the gas hose should be greater than 5 cm, otherwise the bend is easy to age and crack, the service life of the hose is generally 18 months, and the aging should be updated in time.

It is strictly forbidden to install gas meters and stoves in bedrooms, and you cannot sleep in kitchens equipped with gas facilities. This is because gas pipelines are full of gas, and if they leak out due to pipeline corrosion and other reasons, they can cause gas poisoning or even death. In addition, do not pile up sundries and flammable and explosive materials near the gas stove to prevent fire and accidents.

The above content refers to Encyclopedia - Gas Stove.

People's Daily Online - Gas stove, up to eight years.