What is the process of car film? What are the steps of car wrapping?

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

Glass cleaning - covering - cutting and cutting - shaping - internal cleaning - spraying installation fluid - paving - car film - cleaning and inspection.

Hello, Wrap Steps:

1. Before the film, first of all, we must ensure that the working environment meets the requirements of dryness and less dust, otherwise the dust and debris will enter during work, which will affect the effect of the film. It is recommended to wash the car before applying the film.

2. Cover the necessary position of the vehicle, and protect the interior and exterior with a protective cover, if there is no special material, you can also choose plastic wrap.

3. Clean the car glass that needs to be filmed, pay attention to the top and edge of the glass, and then wipe the water.

4. The next step is to cut the car film, pay attention to the size of the car film to match the glass. Spray a little water on the surface of the glass, then adsorb a certain thickness of plastic film to the window, and then draw a pattern according to the edges, the template can be a little more than the glass.

5. When the front and rear windshields are filmed, the baking film also needs to be shaped. Cover the cut car film on the outside of the glass, and then use the heat gun to shape it, this step is also more critical, and it is easy to make mistakes, because the temperature and shaping method of the heat gun have relatively high requirements, otherwise improper use can easily lead to the car film blackening or glass cracking.

The construction process of film is simple, which can be roughly divided into: film cutting - glass cleaning - baking and shaping - formal film - environmental cleaning.

1. Film-cutting: Measure the car glass to be constructed, accurately measure the size of the window, and cut the accurate window shape according to the measured size.

2. Clean the glass

When cleaning the glass, spray water on the outer glass and wipe it with your hands, because the sensitivity of the human hand is the strongest, and you can feel the slightly larger dust particles.

3. Baking and shaping:

For the front and rear windshields of the car and the side glass with a large arc, the film is baked and shaped with a high-temperature electric heating gun to be completely consistent with the curvature of the glass.

4. Formal film:

When it comes to the formal filming, most of the upper film will be pasted from top to bottom, starting from the top of the glass to tear off the upper part of the film, and the protective film will be slowly scraped downward, and the protective film will be moved down while scraping to the bottom of the glass.

5. Clean environment:

Finally, it is necessary to clean the environment after the film is applied. Wash the film that has been pasted, and then remove the water impermeability protective cover. Return the original items in the car to their places, and clean up the construction waste and stagnant water outside the car.

It should be noted that professional film tools must be used in the entire film construction process, and the general standard construction shops have professional film tools.