How can wood wax oil be used for better results?

Sanding, sanding should be careful, so that the surface is dry, smooth and free of dust. The moisture content of the wood does not exceed 20%. Sandpaper should be used in order from small to large.

The first pass needs to be sanded with 120-240 mesh sandpaper, and the second pass is sanded with 600-800 mesh sandpaper. The larger the number of sandpaper meshes, the more delicate the grinding effect. The finer the surface of the wood, the better the effect of the wood wax oil, and at the same time, the more wood wax oil is saved.

Large-area construction should use an electric grinder.

Rub in the direction of the grain of the wood. Wait for the excess wood wax oil on the surface to fully penetrate and wipe off the excess oil on the surface, and the general residence time is about 5-10 minutes. The drying time between each pass is about 12-24 hours, and it is recommended to apply a second coat every other day.

Polishing with polishing cotton before the second coat can achieve a matte effect, and also smooth out burrs and rough areas by the way.

Keep the dust clean, and then use the method of the first pass to do the second pass. If you want to feel better after drying, you can polish it with polishing cotton. Maintain good ventilation with a temperature of 25 and low humidity. Choose a good wood wax oilCheresi wood wax oil

When painting, be sure to follow the direction of the wood grain, and wipe off the excess wood wax oil on the surface after it has fully penetrated, and the general stay time is 1-3 minutes. The drying time between each pass is about 8 hours (good ventilation, temperature 25, 50% relative humidity), after drying, use 0 polishing pad or 400 sandpaper for light sanding to enhance the penetration of the second pass, increase adhesion, remove dust and apply a second pass. The final pass can be polished with a 00 polishing pad or a clean, soft cloth to achieve a better finish.

Generally, wood wax oil has different products for different occasions to choose from, and for outdoor use conditions, it needs to be mildew-proof, antibacterial, ultraviolet-resistant, anti-fouling and other characteristics, so only outdoor series wood wax oil can be selected;

For indoor furniture and decorative wood surfaces, it only requires waterproof, dustproof, anti-corrosion of daily chemicals, etc., and general wood wax oil can be used;

For indoor or outdoor flooring, hard wood wax oil with high abrasion resistance is required;

For the appearance and material of the wood is not very good, it is necessary to use covering wood wax oil to cover the poor surface.

Wipe the object to be smeared first, and use it according to the method of using wood wax oil.

Wood wax oil is a kind of environmentally friendly wood coating used in indoor and outdoor wood products, bamboo products, rattan products, simple construction, environmental protection, natural texture, delicate texture is its characteristics, but also the reason why many people choose wood wax oil, very suitable for DIY, no construction experience personnel can also operate the construction, construction is generally 2-3 times.

Wood wax oil construction steps:

1. Polishing the substrate to make its surface clean and dust-free.

2. Stir the wood wax oil fully to avoid the separation of oil and wax caused by long-term stationation.

3. You can use brushes, cotton cloths, spray guns and other tools to apply it, brush it thinly, do not build too thick, and avoid slow drying.

5. Polishing and grinding, with about 1000 mesh of fine sandpaper or polishing surface for gentle grinding on the surface of wood wax oil, can play a role in gifting brightness and feel, outdoor requirements for it is not high, can also not operate this step.

The use of wood wax oil is to sand, clean, process wood wax oil, color, and paint.

Tools: table, sandpaper, brushes, wood wax oil, color paste.

1. Polishing first.

Let's take a wooden table as an example, first go to the hardware store to buy some sandpaper, and you can try to buy 180 mesh, 320 mesh, 600 mesh sandpaper. Use this sandpaper to sand the surface of the wooden table until it is very smooth.

2. Clean up again.

There will be a lot of dust on the surface of the sanded furniture, so you can use a brush or cotton cloth to clean the dust on the surface.

3. Wood wax oil treatment.

At this time, you can turn on the wood wax oil, and then dilute the wood wax oil with thinner and stir evenly for later use.

4. Coloring. Usually the color of the wax oil is fixed, and if you need to use different cracking colors, then you must also buy a special color paste. Pour the color paste into the wood wax oil, stir well and set aside.

5. Brushing. This step begins with a cotton cloth or brush, or you can buy a spray gun and paint along the grain of the wood, first applying the wood wax oil. After painting, place it in a sunny and ventilated place and wait for it to dry.

Then stir the wood wax oil well, and carry out the second coating with core brushing, the method is the same as the first painting. After painting, place it in a ventilated and sunny place and let it dry.

1. Substrate treatment.

Before using wood wax oil, it is necessary to carry out the base treatment, and generally sandpaper is used for sanding. It is recommended to use 120-240 mesh sandpaper to polish along the direction of the wood grain until smooth and flat, and the degree of polishing care determines the effect of the finished product. After that, use polishing cotton to polish along the direction of the grain, and simultaneously remove the burrs that are not easy to polish to improve the feel of the wood surface, and then use a clean brush, cotton cloth, etc. to remove dust to make the surface clean and dry before painting.

2. Toning. Add 1 can of 100ml of wood wax oil special colorant (shake it before opening) to the clear oil, stir it thoroughly, and then get the color according to the standard color concentration. If you need a darker or lighter color, you can increase or decrease the amount of special colorant added accordingly.

However, it should be noted that before coloring a large area, you can take a small amount of wood wax oil to find a small piece of wood of the same material as the wood, and try to paint it to determine the desired color.

3. Brushing. Use a stiff brush or cotton cloth to apply a thin layer of wood wax oil with good color along the direction of the cherry wood grain, slightly absorb (5-10 minutes), if there is no unabsorbed paint on the surface, wipe it off with a clean cotton cloth to make it smooth and flat. Keep it well ventilated, otherwise it will cause slow drying and abnormal drying.

4. Supernatant oil.

After the coating is completely dry, gently sand off the small particles on the surface with sandpaper, and then polish the surface with polishing cotton to achieve a matte effect, and then apply it a second time with the same method after it is cleaned. The second pass can be supernatant.

5. Polishing and grinding.

After the second coat is completely dry, you can use polishing cotton to polish the smile bush to make the surface of the wood feel smooth and delicate.

Wood wax oil is a coating that protects the surface of wood, which can effectively prevent wood from moisture, deformation, cracking and other problems. Here's how to use wood wax oil:

Prepare tools and materials: wood wax oil, sandpaper, brushes, clean cloth.

Clean the surface of the wood: Use sandpaper to smooth the surface of the wood to remove dust and dirt. Then wipe it clean with water to make sure the surface of the wood is dry.

Apply wood wax oil: Use a brush to evenly apply an appropriate amount of wood wax oil to the surface of the wood, taking care not to overdo it. If more coats are needed, you can wait for some time after the first coat before applying a second coat.

Wipe the surface: Use a clean cloth to gently wipe the surface of the wood and wipe off any excess wood wax oil. Be careful not to wipe too hard to avoid scratching the surface of the wood.

It is important to note that the surface of the wood needs to be treated before applying wood wax oil to ensure that it can fully absorb wood wax oil. In addition, it is also very important to choose the right wood wax oil for pure collapse, and different types of wood wax oil need to be used for different woods. It is recommended to understand the relevant knowledge or consult the advice of professional Tongyuan people before use.