How to add ink to the HP Deskjet D2568 Inkjet Printer 10

It seems that the DeskJet series can't add ink, and it seems that the ink cartridge is usually changed directly. Wouldn't it be nice if you just bought the 816 cartridge and replaced it?

Open the lid, press down to take out the ink cartridge, if you buy bottled ink, go to the clinic to find the needle, and inject 10-20ml according to the ink color!

Summary. 1. First power on the HP printer, keep it running, open its lid, click the open button to move the ink tank to the middle of the printer, and press the open button to easily remove it. 2. Tear the sticker on the cartridge, generally the injection point is in the upper right corner of the sticker, which is a small round hole.

Use a syringe to draw 3 ml of ink from the ink bottle, and do not use too much, otherwise there will be ink leakage. 3. Use a syringe to slowly inject the ink from the injection hole, the process must be slow, and you can stay in the middle for a while to ensure that the sponge in the ink cartridge fully absorbs the ink. After filling, let the cartridge sit for 10 minutes.

4. Press the print head with a white napkin, if a clear ink strip appears, it means that the ink is added successfully. Load the ink cartridge into the printer in the original installation method, start the printing attempt, and check if it works.

1. First power on the HP printer, keep it running, open its lid, click the open button to move the ink tank to the middle of the printer, and press the open button to easily remove it. 2. Tear the sticker on the cartridge, generally the injection point is in the upper right corner of the sticker, which is a small round hole. Use a syringe to draw 3 ml of ink from the ink bottle, do not too much, otherwise there will be ink leakage.

3. Use a syringe to slowly inject the ink from the injection hole, the process must be slow, and you can stay in the middle for a while to ensure that the sponge in the ink cartridge fully absorbs the ink. After filling, let the cartridge sit for 10 minutes. 4. Press the wheel print head with a white napkin, if a clear ink strip appears, it means that the ink is added successfully.

Load the ink cartridge into the printer according to the original installation method, start the printing attempt, and check the source to see if it can work normally.

That's it, dear.

That's it.

If you're satisfied.

Both cartridges must be installed (usually one black cartridge and one color cartridge) for the printer to work properly.

1. First turn off the power of the printer, and then open the protective cover and protective compartment of the ink cartridge in the printer.

2. Select the ink cartridge you want to add ink, as shown in the figure below, the third cartridge has less ink.

3. Turn off the ink supply switch, the key step, when adding ink, the ink supply switch must be closed.

4. Add ink to the removed cartridge.

5. The last step is to install the ink cartridge back into the printer. You're done.

Hello!!! HP's DeskJet series of dual-head inkjet printers, the traditional way of working is that 2 ink cartridges must be installed (usually one black ink cartridge, one color ink cartridge) for the printer to work properly, when you encounter a cartridge damage or lack of ink, you must buy a new ink cartridge to install it to reprint, if there is an urgent printing task, this situation will undoubtedly cause you great inconvenience. Luckily, the HP DeskJet D2668 Printer only needs one ink cartridge to keep your printer up and running for urgent print jobs.

As long as you install an 818 black ink cartridge or an 818C color ink cartridge in your printer, the printer can print out the documents you need.

Zhuhai Danjun printing technology **** to remind you!

On the ** online Zhuhai Danjun grandly launched HP 816 EPSON T1091 series preferential activities, free shipping. New products are coming soon, nozzle cleaning liquid, new version of filling ink, everyone has friends come and take a look! ~~

One is a color cartridge and one is a black cartridge, of course, two should be used together, otherwise you have one that cannot be printed, the ink is very simple, isn't there a label at the top, tear the label a little bit will have a few small holes, you can use that syringe-like thing to inject it, the four holes of the color cartridge are different colors, it seems to be yellow, blue, red, you just look at the manual, after the finish, remember to stick the label with transparent glue or something, and put it in the printer.

If you print only black, use green for color cartridges to add black.

Cartridge plus ink tutorial on the network has forgotten your use of 816 or 818. There are tutorials for refueling ink on both networks. It's up to you whether you succeed or not.

The approximate method is to tear off the label, use a syringe to point into the hole instead of injecting, about 10ml, and then remember to seal the label.

Remove the replacement cartridge from the packaging and carefully remove the tape. Hold the cartridge so that the copper band is underneath and toward the printer.

1 Remove the tape.

Be careful not to touch the cartridge ink nozzle or copper contacts. Touching these parts will cause ink clogging, non-inkjet, and poor circuit contact. Do not remove the copper band. They are required electronic contacts.

1 ink nozzle.

2 Copper contacts.

6 Tilt the cartridge slightly upwards and slide firmly into the holder until it does not slide.

7 Push the cartridge into the holder.

When the cartridge snaps into position correctly, you will hear a snap.

8 Close the top cover of the printer.

9 Calibrate the cartridge for the best print quality.

For information about storing cartridges, see Maintaining Cartridges.

For information on empty ink cartridges, see the HP Inkjet Supplies program.

Original ink cartridges] The original ink cartridge for the DeskJet D2568 is 818, 818 for both black and color, and 818XL large-capacity ink cartridge can also be purchased. The 818 has a black print of 200 pages, the 818XL black has a print of 600 pages, the 818 color has a print of 165 pages, and the 818XL color has a print of 440 pages.

**: 818 black 120-150 yuan.

818 color 130-160 yuan.

Brand cartridges] 1Domestic ink cartridges are substitute cartridges. The printing effect is not good, and it is prone to problems, in view of the volume limitation of the ink cartridge, so the replacement ink cartridge can print about 200 sheets under the coverage of 5%.

2.If you have to recommend, I recommend Gezhige, which is twice the capacity of the original, and the number of pages printed is twice as much as the original, ** is only the original 2 3, and the actual cost is only 1 4.

The cartridge can generally be refilled, and it is generally 15 yuan to go to the store where it is sold.

However, it should be noted that the ink should not be left for too long after it is used up, otherwise the hole where the ink is added will dry up and it will not be added.

4.Instead of an ink cartridge to about 85 yuan, there are many brands, the color is more expensive and the black is cheaper, and the domestic ink cartridge is also with 10 ml of ink, the color is less, and it is very troublesome to add ink after use. In that way, the amount of ink is dozens of times that of the original ink cartridge, and it is easier to add ink to the outside ink bottle.

Some replace the ink cartridge with ink, the first two times can still be used, to the third time it shows that the ink cartridge is incompatible, can not print, the color difference is relatively large,.

Hello, a set of about 250 yuan, it is recommended not to choose domestic cartridges, you can use the 818 original cartridge supply.

If the print head is still wrong, then there is a chip on the ink cartridge of your printer, and he is to detect your usage, which chip must be changed after adding ink, if there is no error, it means that your ink cartridge is broken, or reinstall your driver.

This kind of chip has no change, it can only be decoded!