How to set up a wireless router, how to set up a wireless router

How to set up a wireless router.

For specific settings, there is a setup wizard in the router.

Press Enter to enter the settings interface.

1. First of all, if there is a wireless router, then turn on the power supply first, and then plug in the network cable, plug in the WAN port (usually the blue port), and then plug in the LAN port with the network cable connected to the computer, after doing these jobs, then you will see that there is an address and account password behind the router, and enter the address you see in the router in the browser after connecting

2. Then enter, enter the corresponding account and password, generally the new ones are admin

3. After entering the operation interface, you will see a setup wizard on the left, and the attack enters (generally pops up automatically).

4. Enter the setup wizard interface.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. If you choose PPPoe dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

What is the situation, is it your home to pick up, or from someone else's home to your home and then connect to the wireless?

Router A connects to the modem and sets PPPoE dial-up.

A router and B router connection, there are two ways:

1: The LAN port of A is connected to the WAN port of B, and the two routers are cascaded.

DHCP is enabled on Router A, dynamic IP address is set to Router B, and the LAN gateway of Router B is not on the same network segment as A to avoid IP conflicts.

For example, if the gateway IP of A is A, then change the LAN port gateway of B to at least one of the first three digits that is different from that of A.

The wireless settings of the router are set according to the manual. After the settings are complete, the LAN port of Route A is connected to the WAN port of Route B.

2: The LAN port of A is connected to the LAN port of B, and the B router is used as a switch

Connect to the LAN port of Router B, disable the DHCP function of the LAN port of Router B, enable the LAN port setting of network parameters, and change the IP address of the LAN port so that Router B and Router A are on the same network segment. For example, the LAN port IP of router A is changed to B, as long as it does not conflict with other IP addresses that have been used. The WAN port parameters do not need to be set, and the wireless settings of the router are set according to the manual.

After the setting is complete, the LAN port of route A is connected to the LAN port of route B, and route B is equivalent to the expansion port of route A, which plays the role of a switch, and the computer can be connected to the LAN port of route B.

1.Buy a router (if the laptop needs to use wireless Internet access, buy a wireless router) and set the corresponding network parameters;

2.The router is a device that sets up a LAN to achieve network sharing, and the general connection and setting methods are as follows: connect the network cable out of the broadband cat to the WAN port of the router, and each computer is connected to the LAN port of the router (if it is a laptop, you should also use the network cable to connect one to the router and then complete the parameter setting), the IP address of the computer network card is set to be automatically obtained, and the address bar of the computer browser is entered yes, and the network parameters obtained by your computer network card should be viewed. Log in to the router through the IP address of the gateway, generally the username and password are admin, select the WAN port settings, and set your broadband account and password to the PPPoe mode;

3.Then enter the router's WLAN settings or wireless settings, there is a wireless network name or SSID, there is a default can also be set automatically, and then enter the wireless security settings, there is a wireless encryption method selection and password setting, and you can set your wireless signal encryption key;

4.If the laptop uses wireless Internet access, the operation is as follows: right-click the online neighbor - properties - right-click the wireless network connection - view the available wireless network, click your wireless network name in the searched wireless network - connection, and enter your wireless network key for verification, after passing the verification, you can connect to the wireless router to surf the Internet normally; If it is a wireless terminal such as a mobile phone or tablet, the same principle is the same as above, and it can also be used after searching for wireless signals and entering the wireless network key connection;

5.Generally, families use routers with wired router in seventy or eighty yuan, and wireless routers are slightly more expensive, requiring about 150 yuan, and it is recommended to buy network products that use TP-Link or D-Link, with stable performance and high cost performance.

**Wire to the cat, and then to the router WAN interface, the first time to set up the wireless network needs, the router LAN interface is connected to the computer, the browser address bar is entered, and the back of the router is written.

According to the setup wizard, set to the last step, complete, prompt congratulations you can go online, wait a while, the router will automatically restart, you can encrypt the wireless network according to your needs. (There are not a lot of wireless routers that need to be set up, and under the guidance of the setup wizard, it can be completed in a few steps.) Other options may seem like a lot, but you can leave them alone at all).

Then enable the IP4 wireless switch to search for the network that has just been set up, and direct access is OK.

After the power is turned on, connect the wireless router to the computer, open the browser and enter in the address bar: to enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access method, and restart the wireless router after the setup is completed.

Next, go to the wireless settings and set the SSID name