High score bounty for questions about BETWIN2000 XP come on, experts .

2: The central word of this sentence is "the whale family."", the part that follows it is to modify this central word! ~

Adversity.. The composition is not written. du。

are members of the whale family which are not fish.The antecedent is the whale family, a clause.

zhi which are not fish is used to decorate the whale family, but dao

I guess it's ...Back to the whale family, which are...

In the sentence is negative. Answer. All yes.

none means "nothing" and all means "(more than three)".

For example: none of us went there yesterdayNone of us went there yesterday.

all of us went there yesterday.We all went there yesterday.

1.I think no one will help you write the composition copy, so you can blow it out by yourself.

2.I have a different opinion from the above Du Di Ren brothers, I think that zhi which are not fish is modified by the subject daodolphins, because the whale family which are not fish is not logical

So which are not fish translates to"And not fish"

Of course, if the sentence is rephrased"dolphins are members of the whale family, which are not fish."It's a little smoother.

It's all negative, which is equivalent to not any

All is all yes and not all is partial (not all).

none of the students are here.None of the students were here.

all of the students are here.The students are all here.

not all the students are here.Not all students are here. (Some didn't come).

which are not fish is a definite clause to modify the antecedent of the whale family.

whale family, whales are mammals, so there is which are not fish behind

It's just a fraction. Who wants to.

Little brother, let's add a few points!

The suffix is perfectly fine. The domain name used by the majority of Indonesians. Make sure his username is correct.

This is a problem with the email address he gave you, I have also encountered it, it is the email address that is written wrong, and the system will return the letter without this address, or the other party's mailbox is full, and there is no way to receive the letter, you can contact the mailbox to solve it.

After ensuring that the client is able to connect to the server, make sure that the DNS address of the client points to the IP address controlled by the domain, and that the system time of the client cannot be higher than the system time of the domain controller, otherwise it cannot join the domain. The computer pings the name of the DC, if it can't be resolved, check the dns settings, can't connect, check the network settings is every win2000 machine has such a prompt? Or is it just this one?

Generally, in win2000, the secret conflict is prompted, which is due to sharing permissions or user permissions.

When you access B (Win2000 XP) from A (Win2000 XP) as a user, the operation before A is not shut down or logged out is limited by the permission settings of the user on the B machine. If you want to access a shared document on B but are not authorized to the user, you will be prompted to enter your username and password again, and if you enter another username and password, a credential conflict will occur. 1.

The computer name or IP of the domain to be added is not in the DC, it already exists, and if it exists, it is deleted.

2.Manually specify the IP address for the computer you want to add the domain to.

3.If that doesn't work, add the same domain name workgroup first, and then add the domain after restarting.

Did you do it before you joined the domain?

If that's the case, you'll need to leave the domain and rejoin the domain again.

If you have a domain controller installed on your own machine, there are domains in the network that are duplicated with your domain name, and you need to reset it.

The system of the win2000 server is reset and then installed.

Original username +Domain name.

If you copy all the files from C: Documents and Settings Andy to C: Documents and Settings, many of them should work.

Striking iron is a primitive forging process that prevailed in the countryside before the eighties of the last century. This process, although primitive, is very practical; It's simple, but it's not easy to learn.

The blacksmith shop is also called the "blacksmith furnace". The so-called "shop" is just a broken house, a big stove is placed in the middle of the house, a bellows is set up by the hearth, and the bellows is pulled, and the wind enters the stove, and the flames in the hearth jump straight up. The iron to be forged is first burned red in the furnace, and then moved to the large iron pier, where the master holds the main hammer and the lower hand holds the sledgehammer for forging.

Experienced in the upper hand, holding a small hammer in the right hand, holding iron tongs in the left hand, in the process of forging, the upper hand should constantly turn the iron by visual inspection, so that it can beat the square iron into a round iron rod or the thick iron rod into a slender iron rod. It can be said that in the hands of the old blacksmith, hard pieces of iron can be squared, round, long, flat, and pointed. Iron products are matched with traditional production methods, such as plows, harrows, hoes, pickaxes, sickles, etc., as well as some daily necessities, such as kitchen knives, spatulas, planers, scissors, etc., in addition to door knockers, bubble nails, door plugs, etc.

1. Adopt the original manual forging method before industrialization.

2. Value: traditional culture and technology need to be inherited. Culture is accumulated over a long period of time, and the rapid development of society has been promoted by industrialization in just a hundred years, but machines are not omnipotent, and culture cannot be abandoned.

3. Mainly used for weapons, agricultural tools, tools, living utensils and other applications. It is widely used in life.

4. Ignition, pulling the bellows, putting the iron into the furnace, clamping out the iron with pliers and putting it on the iron felt to repeatedly make shapes, dip the fire, pawn the fire, and polish (three points of iron and seven points of grinding).

5. Iron shovels, ploughs, shovels, iron ploughshares, adzes, axes, axes, and shovels.

6. Bellows, furnaces, fire covers, iron felt, accessories, hammers (sledgehammers, small hammers, round hammers, flat hammers), all kinds of iron tongs, water, oil, grinding tools.

Beginner iron striker, if it is wrong, give me a lot of advice.

Tradition should be inherited, and do not do to others what you do not want to be done to yourself. If you like traditional culture, study and study it carefully, and speak with action.

1.Your understanding is correct. A shutter speed of 300 is normal, and of course it needs to be higher in strong light. It's not that the smaller the aperture, the better the image quality, and many lenses have their best aperture values.

2.There are pros and cons to using flash, and if you see someone else with the help of flash, you still turn up the ISO, probably in order to make the background ** sufficient.

3.In the case of what you said, in the 10 seconds before you heard a click, the camera was always **. If it shakes, of course the picture will be blurry, and a tripod is a must.

By the way: 10 seconds**, not if it will shake, but if it will shake. Unless you're a special forces ......

4.The choice of tripod, you understand it correctly. It's best to go to a physical store and pick it up according to your requirements.

Mirrors, also known as gray mirrors, have consistent absorption characteristics in the visible range. It acts as a light blocker without any color change. It is a commonly used filter to adjust the brightness. It is not appropriate to keep it on the camera as a filter in its normal state.

1. Shoot the wind.

DAO light light is usually better, and DAO high-speed shutter can still be used when the ISO is low (good image quality). Edition.

2. The noise control ability of the current SLR is no longer wrong, and the ISO setting is reasonable to improve the shutter speed and ensure the quality of the photo. The flash is mainly used for filling light, which is effective for close-up shooting subjects, and sometimes the light intensity varies greatly depending on the angle, such as backlight shooting, you need to use a flash or a fill light plate to fill the light.

3. You're right, a tripod is a must-have under the slow shutter speed.

4. A tripod is worth a penny, and if you have a good economy, it is best to buy carbon fiber. You can understand the main parameters of the specific models before making a decision.

5. The main purpose of using ND lens is to prevent overexposure, if the light is too bright, it is difficult to choose a slower shutter speed to shoot, then use ND lens to reduce the light entering the lens, and you can use a slower shutter to shoot. For example, if you need to shoot outdoors in strong sunlight, or if you need to shoot a waterfall with a slow shutter speed for a long time under normal light conditions, you will need an ND lens.

Depending on your budget and needs, you can't buy a tripod without money.

At the same time, it is recommended to buy a DSLR backpack, which should be more comfortable than a shoulder bag and can also protect the camera.

Nd is what you say.

No. 1: You understand that it is copied, but it is not all bai

Nonsense.

The amount of light entering is not only affected by the shutter speed, but also by the aperture and the amount of light from the outside world at the time. In bright environments, where the light is high and there is plenty of light, shutter speeds can still be fast even when using a smaller aperture for a large depth of field. This has no negative impact on image quality.

Generally speaking, shutter speed has a much smaller impact on image quality than aperture and ISO, and there may be additional noise generation in the case of long ** alone, and there is generally no difference in image quality obtained from 1s or more to the maximum shutter speed.

It depends on the occasion. In some cases, the scene is relatively open, the background is far away, the flashing lights cannot illuminate all areas, and the light level of the scene is relatively low (typical occasions are conferences, parties, etc.). If you only use a flash to get the right shutter speed for a low ISO, only the subject will be illuminated, and the background will be very dark, which will not match the scene, and the subject will contrast with the background.

In order to ensure the harmony of the foreground and the background and take care of the ambient light, it is necessary to use a high ISO to obtain a reasonable shutter speed. At this time, the function of the flash light is only to improve the quality of lighting, such as supplementing the eye light to the portrait, adjusting the unreasonable light ratio brought by the scene light to the subject, etc.

In general, yes. However, if you turn on the "long** noise reduction" function in the camera, **time may become twice the set value, and the extra time is used for noise reduction, and the shooting itself is completed. The machine is not available during this period.

Stabilizing equipmentOf course, a tripod is the best, but in special cases, you can also use a stationary and stable platform such as a table or guardrail for emergency situations.

Regardless of portability and the pursuit of stability and high load-bearing, I personally think that an aluminum frame of about 500 is very good. There are too many choices, you can refer to the models used in photo studios and other places, their requirements for tripods are similar to yours. Individuals use a highly portable carbon rack, so they have little to say.

The function of the ND mirror is to adjust the shutter speed. Think about when a specific shutter speed is required? Still water, waterfall drawing, fogging waves, these are all related to water.

In addition, it can also elongate the clouds, as well as the effect of shooting thousands of empty alleys in broad daylight. As a filter element, the ND lens will affect the normal metering and focusing of the body, and it is recommended to install it after these are completed. Don't pretend to be okay when you're usually fine.

Try the following: 1. Click the "Start" menu and open "Run".

2. Enter regsvr32 and select OK.

When prompted, click OK.

3. Enter regsvr32 again and select OK.

Once again, when prompted, OK.

4. After the above two successful prompts, it means that the IE component has been successfully repaired, after turning off the browser's filtering and other functions, clear the browser's cache (Tools - > Internet Options - > delete cookies), click on the tool on the browser - and then select the bottom Internet option, and then click Internet to delete files (remember to tick the box to delete all offline content), confirm, and then reopen the browser to try.