-
Hello, press F8 when you boot up, and then see if you can enter the interface of factory reset. If you can enter and start over, but you can't, then it would be good to redo the system.
-
It is recommended to try to restore by restarting the computer to enter the safe mode for the last correct configuration.
-
Summary. Hello, please reinstall the system:1
Press the F2 button to enter the BIOS settings interface and select Advanced BIOS Features; 2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority; 3.
Hard Disk Boot Priority Selection: Use the plus and minus signs "+" on the keypad to select the mobile device, and select the USB flash drive on top. 4.
Then select First Boot Device: Select USB flash drive to boot. 5.
Then reboot to start the step-by-step installation, the installation process will be restarted several times, just wait. 6.Once the system is installed, remember to install the driver!
Hello, please reinstall the system:1Press the F2 button to enter the BIOS settings interface and select Advanced BIOS settings
advanced bios features;2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority; 3.Hard Disk Boot Priority Selection:
Use the plus and minus signs on the keypad "+, to select the mobile device, and select the USB flash drive on top. 4.Then select First Boot Device
Select USB flash drive to boot. 5.Then reboot to start the step-by-step installation, the installation process will be restarted several times, just wait.
6.Once the system is installed, remember to install the driver!
These three steps are repeated.
You need to reinstall the system.
Hello, please reinstall the system:1Press the F2 button to enter the BIOS settings interface and select Advanced BIOS settings
advanced bios features;2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority; 3.Hard Disk Boot Priority Selection:
Use the plus and minus signs on the keypad "+, to select the mobile device, and select the USB flash drive on top. 4.Then select First Boot Device
Select USB flash drive to boot. 5.Then reboot to start the step-by-step installation, the installation process will be restarted several times, just wait.
6.Once the system is installed, remember to install the driver!
Generally, only the C drive is restored, but sometimes there is a factory restore option, so the entire hard drive will be restored, so it is best to back up the hard disk data before restoring. >>>More
There are two ways to place batteries in Dell laptops, which are external and internal. The external battery can be removed by simply flipping the latches on both ends of the battery at the same time. For built-in batteries, you need to remove the screws on the back plate of the laptop, open the back plate, disconnect the cable from the battery, and then unscrew the screws that hold the battery in place. >>>More
1) It depends on how to do it, if you don't select "Reset PC", the entire file will not be deleted. And only enter the C drive into a one-click restore. >>>More
Method. 1. Reset the network.
1. Press win+r on the desktop to enter cmd and click OK to open the command prompt window, win10 right-click the start menu with the mouse to open the command prompt (administrator). >>>More
There are many phenomena that lead to laptop keyboard failure, software problems and hardware failures, which may cause laptop keyboard failure. >>>More