What is the best engine oil for Toyota?

Most of Toyota's cars are recommended to add 92 gasoline, and everyone has never heard of any problems with Toyota with 92 gasoline, so it's not just who adds the high mark.

Some people say that it is the reason for the compression ratio, Volkswagen's EA211 engine and the compression ratio are 10:1 and :1 respectively, according to the anti-knocking ability represented by the gasoline number, the compression ratio in 8-10 using 95 gasoline is completely correct, but in fact, the high compression ratio must add 95 gasoline This statement is wrong, the same turbocharged model, Toyota's engine compression ratio is 10:

1. The manufacturer also recommends adding No. 92 gasoline. The turbocharged engine technology of German cars is not very perfect, in order to ensure the working performance of the engine, it is necessary to use high-grade gasoline to suppress the knocking, as everyone said that the technology is not enough, and the fuel is made up.

The characteristics of each engine are different, not just look at the compression ratio to judge how much gasoline to add, the manufacturer according to the engine is suitable for filling how much oil, determine the cylinder capacity and the size of the piston, and then set the size of the fuel injection, how much oil is recommended to be added in the manufacturer's research and development. Usually we choose the oil number marked by the manufacturer when we refuel, and this information will usually be displayed on the fuel tank cap or manual. Be sure to choose the right grade of gasoline, not the higher the grade, the better.

Which Toyota? It is better to use Mobil Silver or Shell Blue Heineken, and it is not recommended to use miscellaneous brands, unless your model is a classic car.

There is no best application of engine oil, only better, with the full synthesis of Aojixing, mainly refer to 5w30, if the total mileage of the car is more than 50,000, consider 5w40, the fully synthetic grade engine oil is basically universal. The oil should be used correctly. (1) It is necessary to use the right quality grade oil, which is the key to ensuring the normal operation of the engine.

2) If the oil is not timely or there is no suitable oil, alternative oil can be used, but in use, it is necessary to strengthen observation, pay attention to the quality of oil and whether the oil filter is blocked, and deal with the problem in time. (3) Choose oil with appropriate viscosity. (4) When changing the oil, the waste oil should be cleaned.

5) The gas that enters the crankcase from the combustion chamber is corrosive, which can oxidize and deteriorate the oil and pollute the engine, so the crankcase must be well ventilated. (6) Maintain the normal oil level height.

Are you a turbocharged engine, if not, you don't have to use a fully synthetic one. It also depends on the region, altitude, and ambient temperature.

There is no optimum oil. It's basically the same, and the efficacy is pretty much the same.

Summary. Hello, hello, this depends on what series of models our car is Toyota, in general, the recommendation of Toyota series is to use 0w-20 fully synthetic engine oil, Toyota's original brand engine oil, other brands can also be used, such as Mobil Shell Castrol, the replacement cycle of this fully synthetic engine oil is one year or 10,000 kilometers.

Hello, I am helping you sort out the answers to your questions, please wait a while Hello, dear, the exclusive technician of the car master will serve you, attentively, carefully, and concentrate on answering your car questions, and providing you with a satisfactory service for the imitation of the empty bucket posture fiber! I hope my booklet can help you! Hello, hello, this depends on what series of models our car is Toyota, in general, the recommendation of Toyota series is to use 0w-20 fully synthetic engine oil, Toyota's original brand engine oil, other brands can also be used, such as Mobil Shell Castrol, the replacement cycle of this fully synthetic engine oil is one year or 10,000 kilometers.

**Toyota series:

1. Toyota's design concept should be the concept of popularization, emphasizing not handling, high horsepower but the most acceptable to the public and fuel consumption, and can sit comfortably, so Toyota's engine is a decent design, neither taking the high-end route nor taking the supercharged route, that is to say, the requirements for engine oil are not very high for this design, and there is no obvious opportunity loss;

2, but energy saving is the key to meet the basic requirements of the general public for transportation tools, basically Toyota engines of different displacements should be pure car to use 0w w20 oil, if you use 0w20 oil then the energy-saving effect is the most obvious, if not often fierce driving, we are not recommended to use more than 5w30 viscosity oil, oil can have a 2% fuel-saving effect for each viscosity level, such as from 5w40 to 5w20 can save 4% fuel, If it is reduced from 5w40 to 0w20, the energy saving effect reaches 6%;

3. Jiamei No. 1 lubricating oil M series 0W W20, R series 0W W20, S series 5W20, and Green Arrow 5W20 are very suitable for the engine to do imitation design requirements, of course, the most expensive M series, the oil change cycle is also the longest, and the Green Arrow semi-synthetic series can also meet the oil change cycle of 10,000 kilometers (comprehensive road conditions). Go to the 0W20 of the M series large leased train, and the oil change cycle can reach 10,000 kilometers (in terms of comprehensive road conditions).

The use of 5w30 model of Toyota motor oil is due to the good lubrication, oxidation resistance and temperature stability of this type of engine oil, which can adapt to various harsh vehicle conditions in emergency situations, alleviate friction and high temperature, reasonably lubricate various body parts, prevent the contact between water, air, acidic and harmful gases and parts, buffer the pressure rise of the engine cylinder port, and flush the dirt generated on the working surface of the parts.

The 5W20 model lubricating oil used by Toyota Motor Corporation, the use of this type of lubricating oil is due to the good lubrication, oxidation resistance and temperature stability of this type of lubricating oil, which can adapt to various harsh vehicle conditions in emergency situations, alleviate friction and high temperature, reasonably lubricate the body parts, prevent the contact between water, air, acidic and harmful gases and parts, buffer the pressure rise of the engine cylinder port, and flush the dirt produced by Qin Chan on the working surface of the parts.

The special engine oil model of Toyota Crown is 5w20 fully synthetic engine oil, but the 12-year-old crown can also use 5w20 engine oil if it is a new car. If it has been used for a certain number of years, you can consider a higher viscosity oil. After all, over time, the internal parts of the engine have also suffered a certain amount of wear, and the gap between the parts has also become larger.

Using a higher viscosity oil can form a thicker film that protects the engine and better prevents parts from wearing.

Naturally aspirated engines have general requirements for oil quality, mineral oil and semi-synthetic oils can be used, and synthetic motor oils can be used in all cases if the consumer economy allows. Compared with self-priming engines, turbocharged engines are more precise inside, have a more complex working environment, and require higher oil quality, so they need a lubricating oil with better fluidity, and it is best to use a fully synthetic engine oil.

The choice of viscosity, generally in winter, can use 5W in most areas, and it is best to use 0W in some areas in the north (such as Harbin) to get better cold start performance and adapt to the driving environment. The high temperature viscosity of lubricating oil is generally 20. However, if you often drive in traffic jams, the vehicle is relatively old, and it is a heavy-duty vehicle for long-distance transportation, you can appropriately increase the viscosity of the engine oil, such as using 0w30 engine oil.

Choose a lubricant brand, need long-term oil, choose Mobil oil; If you are concerned about the cleaning ability of the engine oil, you can use Shell lubricants; Oils with strong film toughness should be used, and Castrol is advocated. For example, turbocharged engines are prone to carbon build-up at high speeds, so you can choose Shell engine oils with strong cleaning capabilities.

Photo by Pacific Automobile Network Q&A).