Samsung R518 laptop installation WINDOWS7 issue

Hello: According to your description:

Samsung R518 laptops can be installed with Windows 7.

Please install the genuine or pure version of the system, and try to update the driver through Samsung's official website after installing the system.

If you use the version of the ghost version such as the built-in driver, it is easy to have driver errors. If the problem persists through the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center, and the engineer will inspect the machine and deal with it.

You're prompted by an upgrade installation. The graphics adapter is the graphics card.,It's your 4650 graphics card.,Maybe it's because the graphics card is too new.,Win7 doesn't have it in the driver library.,So you don't support it.,Regardless of his direct installation.,Update the driver online after installation.。

The hard disk is not right, you go into the advanced and select the hard disk to the first partition C.

Update your machine driver with a driver life, and this prompt window should be gone.

1.Restore BIOS: When the Samsung screen appears at boot, press F2 to enter BIOS, then press F9 to select YES to recover, press F10 to select YES to save and exit.

2.Press F2 to enter the BIOS settings at boot, find the Boot option under Boot Device Priority, use the F6 key or the up arrow key to adjust the hard disk boot (SATA HDD) to the first position, and then press the F10 key to save and exit.

3.When the Samsung screen appears at boot, press the F4 key to enter the Samaung Recovery Solution and select System Restore to restore the initial system.

All the boot items have been tried, press the button to boot into recovery mode to restore the system in a factory mirror. Or press a different key to retry the start.

Simply put, your system isn't installed. As a result, it cannot be started. Either reinstall it or restore it to the factory.

It is recommended that you consult the Samsung platform!!

Did your laptop originally come with a system?

How to install the operating system:1Please press the F2 key to enter the BIOS settings when you boot the computer, set the boot device priority option under the boot menu to boot the optical drive, and press the F10 key to save and exit.

If the system cannot be installed, please verify whether you are using the standard version of the system installation disk, such as ghost, tomato garden, etc., it may not be installed, it is recommended to try again after changing the disk.

Is the blue screen a blue screen during installation or a blue screen after installation? Is it installed with ghost or normal installation? The hard disk connection mode may be incorrect, or there may be a problem with the partition table.

Find a system disk and enter PE mode, get the hard disk partition right, and try to install it.

There is no error message. For example, a disk error or a harddisk error

Errors like that. If there is, there is an abnormality in the boot area of the hard disk.

You couldn't do it before, whether W7 uses IDE or AHCI to switch between them.

Zero out the hard drive with a DM tool. It takes too long to clear to about 4%.

Upstairs, don't talk nonsense if you don't understand. The hard drive mode change is a blue screen of death, not a shutdown.

1. After the cloning is completed, he will automatically shut down, you don't care, and then turn on the computer to see if the installation can be completed.

2. If you can't complete the installation, try to change the installation source of another version or use the installation version.

If this is the kind of shutdown when the indicator lights are off, the shutdown is the kind of overheating problem may be greater, you find a good technical one to disassemble and clean up first, or enter the PE with temperature measurement software to see the temperature first. If you're talking about a black screen, it's not a shutdown, and this is generally a problem with the graphics chip. Notebook questions can be answered.

Has the hard drive mode changed? Win7 uses AHCI XP and uses IDE

Can be installed no problem, I install a lot of r439win7 system machines, no can not be installed.

Yes, that's what I'm pretending.

Processor: Intel Pentium Dual-Core (Penryn) T4200 ( Operating System: DOS System Memory Capacity:

2GB HDD Capacity: 320GB Screen Size: Inches Graphics Chip:

The ATI Mobility Radeon HD 4650 can be installed with a W7 system without any problems. Give it a try.

You can barely install win7 in this configuration, my notebook is about the same as yours, I have installed win7, but it's not particularly smooth.

You can install Win7, and you need to flash BIOS to install the OEM version

You try to boot the computer and press F8 to safe mode, uninstall your graphics card driver, and then restart the computer to see, enter the system interface and then install the driver. If you can't enter safe mode, you should have reinstalled the system because it wasn't installed correctly.

You're just PE, maybe because it's compatible, this PE can't be started, and generally PE tools have several PE starts, and you start it again. As for the installation, you also have to have the ISO file of Win7 to install under the PE.