How to adjust powder blue paint, how to adjust powder brown

Powder blue. The preparation method of lacquer: "pure white + sky blue" or "pure white + blue" can be used to make powder blue paint.

Paint Tinting Tips:

Colors generally come with different color heads, and so on according to the following color matching principle:

When matching green, yellow with a green head and blue with a yellow head are generally used.

When paired with purple red, blue with a red head and red with a blue head should be used.

When paired with orange, use red with a yellow head and yellow with a red head.

When blending gray, green and other compound paints, a variety of pigments are required, and the oiliness and density of various pigments are different, and there are often phenomena such as "floating color" and "blooming", so trace amounts of surfactants can be added as appropriate.

or leveling agent, anti-floating agent to solve, the amount added is generally in.

I think it should be blue with white inside to make it brighter.

Red + Blue + Yellow = Brown.

Mixing three colors together is brown. Users need to pay attention to the proportion, yellow is the most, red, blue is a trace amount, it is recommended not to use too much pigment when trying the color, wait for the brown to be successfully blended, and then a large number of color matching.

In principle, green plus a small amount of red can also be blended out of green, if you don't grasp the proportion, it is recommended to try the color first. Yellow with a trace of red or black, or green with a trace of black can be blended into brown.

Pinkish-brown. Powder: Conventional is one of the expressions of dirty feelings, which belongs to the range of warm dirt.

Polar colors mostly express white, light tones, and are faded, such as pink, pink blue, powder blue, pink purple, etc. The pink brown here is the brown effect of the regular slightly warm and slightly dirty color, with a brown tone as the main color, slightly reflecting the warm and dirty feeling (the direction of popularity).

Pink brown is the need to add a certain sense of powder to the brown base, dirty, resulting in brown is not pure, there is a slight sense of hue tendency, in this allocation thinking process can use the base color or the yellow in the base to replace the color in the composition of the required yellow, and then intervene in red and blue to reflect the pink and brown feeling, purple can be used to replace the red and blue presentation.

The above is the basic characteristics of pink and brown are conveyed, and the following basic presentation scheme is obtained by combining the characteristics with the concept of brown

6 0 or above base color +0 66 + 12%.

20% blue paint + 80% white paint = 100% light blue.

When matching colors, in order to compensate for the monotony of the tone, a certain color can be used as a focus, so that the overall color scheme is balanced. When the overall color relationship is not clear and ambiguous, it is necessary to highlight an accent color to balance the color relationship.

Here are a few things to keep in mind when choosing accent colors: accent colors should be more intense than other shades. The accent color should be chosen in contrast to the overall tone.

Accent colors should be used on very small areas. It cannot be used on a large area. When choosing accent colors, you must consider the balance of color matching.

Add a small amount of red bose paste or red paint to the white paint, and pay attention to the same type of paint for white paint and red paint.

Pink is a color made up of a mixture of red and white, and is often described as pale red, but it would be more accurate to say that it is an unsaturated bright red. Since there is also a difference in shades of pink, in the case of a color card, you can use a computer to modulate it according to the color number. If there is no color card, it can only be modulated by a manual method.

With white paint, add a little red, if it needs to be adjusted to a cool color, add a little blue (blue will turn purple), otherwise just add red. Don't add too much at once, add little by little, until you are satisfied.

Although many walls and walls are often white, but considering the needs of some personalized decoration styles, many friends may buy some different colors of paint for spraying and smearing, the common is blue paint, because the color of blue can create a more peaceful atmosphere for us, especially suitable for painting in the study, and the blue paint on the market is not only a single color of decorative building materials products, many also have a variety of patterns and styles of choice, Interested friends can combine the following to understand and choose the best one to try to start with.

1. There are several types of blue paint

There are many kinds, such as: light blue, sky blue, light titanium blue, peacock blue, sea blue, light blue, sky titanium blue, dark blue, medium blue, royal blue, Chinese blue, blue gray, light titanium blue.

Second, how to adjust the blue paint

Blue paint can be made from blue + white.

Blue is a type of blue, the color of pure blue stone, bright blue, also known as blue. In the color spectrum, it is considered pure blue, and the hue is very pure, with a pearlescent luster, so it is a kind of pearlescent color, which belongs to the cold tone.

1. Paint tinting skills 1.

Debugging the sample is a necessary process before color matching, first determine how many colors of secondary color paint are contained in the paint sample, calculate the color types that participate in the color matching, and then adjust the secondary color and secondary color respectively in a small container.

2. Paint tinting skills two.

The main color paint is the color paint with a large amount in use, but the coloring amount is small, add the secondary color paint with strong color strength in the main color paint, stir evenly, compare the sample and the color plate, from light to dark, check at any time until the satisfactory effect is achieved. For example, with beige paint, you should first add an appropriate amount of white paint, slowly add yellow paint, and keep stirring until you reach the desired color.

3. Paint tinting skills three.

The color of the paint is light when it is toned, but the color will become relatively dark after drying, so the color of the wet paint should be slightly lighter than the color on the sample, and it is necessary to grasp the floating and other properties of a primary color in the color matching in advance, especially amino coatings and perchloroethylene coatings.

4. Paint tinting skills four.

Add some auxiliaries appropriately, such as varnish, curing agent, desiccant, etc., and add desiccant to the container in winter before starting to match the color, so as not to affect the tone.

The paint of the compound color paint needs to choose the paint with the same nature, and the solvent system should also be miscible, otherwise the quality of the paint will be affected, and there will be delamination and gelatinization in serious cases.

The above is an example of suggestions and information on the purchase of blue paint, which can be known that compared with other color paint products, because they are blue, they are more quiet, suitable for painting and installation in the study and other fields, and there are different shades of blue, including the blue used in the hospital and the blue used in their own homes, there may be certain differences, and the choice of their patterns and patterns is also relatively rich. Interested friends can combine the above mentioned before the purchase, I believe that you can harvest a satisfactory decorative and beautiful effect.

Sky blue is more blue, unlike gray white with a little black paint in it, so you have to buy the deepest blue (dark navy blue) to tone. Use a small amount of white paint (a cup of white paint) to adjust the proportions.

However, the composition of each paint is not the same, and the consistency is added to the amount is related, sometimes the color is mixed with oil and gas after the discoloration, it is best to find the manufacturer according to the color mixing software to call the special color paste.

White and blue come out and it's sky blue.

Blue cannot be accentuated by any other color. Blue is one of the three primary colors of color and cannot be tuned, but colors with different brightness and brightness can be obtained by mixing blue with other colors. 1. Powder blue pure white blue 2, blue-green grass green blue 3, gray-blue blue pure black 4, light gray-blue blue pure black pure purple supplement:

1. Pink and blue are harmonized together: purple. 2. Pink belongs to the red color, but it is lighter than the red color, so it is called pink.

When it is mixed with blue, it becomes purple, and the heavier the blue, the darker the purple, and the more pink, the lighter the purple. 3. This is a color matching law based on the principle of three primary colors. Color mixing is divided into additive and subtractive color methods.

Red, blue and green are the three basic colors of color mixing, also called color, that is to say, the different mixture of these three colors can be matched with different colors, but other colors can not form these three colors. 4. For example, the mixture of red and blue can produce magenta, purple, etc.; The mixture of red and green will produce yellow, orange, etc.; Mixing blue and green will produce turquoise, indigo, etc.; When red, blue, and green are mixed, it is white. 5. Therefore, pink and blue also belong to the red and blue principles of the three primary colors, and the colors that are tuned out also belong to the purple system.

Can it be faster?

Blue is one of the three primary colors of color and cannot be tuned, but colors with different brightness and brightness can be obtained by mixing blue with other colors. 1. Powder Blue Pure White Blue 2, Blue-Green Grass Green Blue 3, Gray-Blue Blue Pure Black 4, Light Gray Blue Blue Pure Black Pure Purple Supplement: 1. Pink and blue are blended together:

Purple. 2. Pink belongs to the red color, but it is lighter than the red color, so it is called pink. When it is mixed with blue, it becomes purple, and the heavier the blue, the darker the purple, and the more pink, the lighter the purple.

3. This is the color matching law from the principle of the three primary colors. Color mixing is divided into additive and subtractive color methods. Red, blue, and green are the three basic colors of color mixing, also called trembling and color, that is, the different mixing of these three colors can be matched with different colors, but other colors can not form these three colors.

4. For example, the mixture of red and blue can produce magenta, purple, etc.; The mixture of red and green will produce yellow, orange, etc.; Mixing blue and green will produce turquoise, indigo, etc.; When red, blue, and green are mixed, it is white. 5. Therefore, pink and blue also belong to the red and blue principles of the three primary colors, and the colors that are tuned out also belong to the purple system.

If there is no blue, how do you call purple?

Red + blue tones together are purple. 1. If it is based on blue, you can take a little rough blue pigment and red jujube stool and sell the material, and stir it evenly to make it purple. 2. If black is used as the base material, you can follow 1:

The ratio of 1 is to stir the black pigment and the red pigment evenly so that the purple can also be adjusted.