Apple mobile phone to replace the charging prompt sound, how to change the charging prompt sound of

First of all, I would like to explain to you: the effect of setting the charging prompt sound is that when the phone is plugged into the charging cable, it will automatically ** an audio, this audio can be customized, but I have prepared a lot of nice prompt sounds for you, you can try it out below.

A collection of prompt sounds.

From Tech Fish.

1. First of all, your iPhone system needs to be upgraded to iOS14.

2. Get the prompt sound shortcut, there are many prompt tones for you to choose from.

Tips: The first time you use a shortcut, you need to open the settings of your phone, find the shortcut, and turn on the option pointed by the arrow in the third step (if the button is gray and cannot be opened, follow the prompts at the bottom of the button and run any command to open it).

How to get the prompt sound shortcut, after getting it, install it.

3. After installing the obtained shortcut, open the shortcuts app on your iPhone, click Create Personal Automation, and slide to the bottom to select Charger.

Select Connected, click Next, and select Add Action.

Then click Next, turn off the Ask Before Run switch, and finally click Done in the top right corner.

The automation of this charging prompt is set, have you learned it? If you think it's useful, give me a thumbs up and go!

How to modify the iPhone charging prompt sound?

2. Find the shortcut in the system settings and click Open (you need to run the shortcut once before opening).

3. In the shortcut interface, click Allow.

4. Turn on the Yoho prompt in iCloud and tap Get Shortcut. (You'll be automatically redirected to the shortcut).

5. Click Add untrusted shortcut.

6. Open the shortcut, click Automation - > Create Personal Automation - > Charger in order.

7. In the new automation interface of the shortcut, click the charger below to enter the interface.

8. On the interface of the new automated charger, click Connected, and click Next in the upper right corner.

11. Click [Shortcut] in the interface and click to enter.

12. Select Run Shortcut, click Shortcut again, and click Next.

13. Click to enter the interface, click [Shortcut] again, and click the prompt sound yoho below.

14. Remove the option to ask before running, and when it is charged, it will automatically run the yoho shortcut.

How long do you have to wait to ask the question The trouble is to be more detailed.

2Step 2, open the Yoho prompt in iCloud, and tap Get Shortcut, tap Add Untrusted Shortcut.

3 Step 3: Open the shortcut and click on the "Automation" "Create Personal Automation" charger.

5 Step 5, select Run Shortcut, click Shortcut again, select Prompt Sound Yoho, and click Next.

6 The sixth step is to turn off the switch that asks before running, and then use the charger to charge the iPhone, and there will be a prompt sound.

There is no yoho to ask questions

The first step is to ask questions.

Question: Yes, I just can't find that tone, yoho

Sorry to answer, maybe it's a different phone, most of them can be found, I can't help you, I'm very sorry, you can refund it, you can contact me at any time if you have any questions after paying attention to me.

You can change this charging sound directly in the settings and then click on the modify shortcut.

Charging is a Chinese word that refers to the process of replenishing power to a device such as a battery. The principle is to let the direct current pass in the opposite direction of the discharge, so that the active substances in the battery can resume their effects. Now, there are extensions such as study, work, etc.

How to modify the iPhone charging prompt sound?

How to modify the iPhone charging prompt sound?

In this case, you can do a factory reset, and then the system sound will come back automatically.

Setup method: <>

2. After entering the command, create a personal automation.

3. After entering the creation of personal automation, we continue to look for chargers.

<>5. Enter the desired prompt sound in the pronunciation, and click the vibrato next after input.

6. Finally, enter the next step, check the state of the device when it is connected to the power supply, and the setting is successful.

Take Apple 11, for example, the method of setting the charging prompt sound for Apple mobile phones is as follows:

2. Turn on the Yoho prompt in iCloud, tap Get Shortcut, and click "Add Untrusted Shortcut".

3. Click Automation, Create Personal Automation, and Charger in order, find the charger in the new automation interface of the shortcut and click it.

5. Select "Run Shortcut", click "Prompt Sound Yoho" below, remove the option to ask before running, and the key will be automatically used to command the Yoho shortcut when charging.

This answer applies to most iPhone models.

First, enter the main page of the iPhone, and then click to enter the shortcut.

2. On the main page of the shortcut, click to enter the automation option in the bottom function bar.

3. On the main page of the automation, click to enter the creation of personal self-state activation.

4. Scroll to the bottom of this page. Select the Go to Battery Drain option.

<>6. On this page, click to enter the Add Action option.

<>8. At this time, enter and add the custom content that needs to be notified. Tap the plus sign when you're done typing.

<> ten. 1. At this time, you can see that when the battery level is 100, there will be a notification and voice reading.

Setup method: <>

2. After entering the command, create a personal automation.

3. After entering the creation of personal automation, we continue to look for chargers.

5. Enter the desired prompt sound in the pronunciation, and click Next after entering.

6. Finally, enter the next step, check the execution status of the device when it is connected to the power supply, and the setting is successful.

If you really don't like the charging tone, you can change it through other software, but it is not necessary to change the prompt sound!

Why change that, if you change it, your system will be paralyzed.

How to modify the iPhone charging prompt sound?

First, enter the main page of the iPhone, and then click to enter the shortcut.

2. On the main page of the shortcut, click to enter the automation option in the bottom function bar.

3. On the main page of the automation, click to enter Create Personal Automation.

4. Scroll to the bottom of this page. Select the Enter battery level option.

<>6. On this page, click to enter the Add Action option.

<>8. At this time, enter and add the custom content that needs to be notified. Tap the plus sign when you're done typing.

<> ten. 1. At this time, you can see that when the battery level is 100, there will be a notification and voice reading, click Finish.

First of all, make sure that the mobile phone system is ios14, and then in the iPhone, install the charging tone, shortcut, you can install two, 1 for the charging tone, and the other 1 for unplugging the charger.

Hello, this sound is the default sound of the unit, as long as your phone is in standard mode and not silent, then there is a prompt sound when the phone is charging. Or you can turn on the switch on the top of the volume increase or decrease on the left side of the phone. Hope it can help you!