How to reuse the leftover soap, and how to make a small piece of soap left over at home?

We all have soap at home, but every time we use it, there is always a piece of soap left, and it is not very convenient to pick it up and use it, and it is a pity to throw it away!

Prevent shoes from grinding feet. Wearing new shoes is always a nightmare of grinding your feet, now let soap put an end to it!

Take soap and apply a little soap to the heel of the shoe, the outside of the big and small toes, and these places where the feet are rubbed.

The inside of the shoe becomes smoother, and the foot will not grind! Isn't it simple?

Smooth zipper. The zipper on the clothes and pants is stuck, and it is not easy to pull, so you can use some soap to smooth it!

Apply a layer of soap to the zipper, and with soap as a smoothing agent, it will pull smoothly!

Relieves itching. If you are bitten by a mosquito and itch so much that the ointment does not work, then try to use soap to relieve the itch.

Rubbing the soap with some water on the itchy area can not only relieve redness and swelling, but also have an immediate effect on itching!

Fast sewing. I will do some small needlework at home, and what should I do when the needle can't fit into the thick cloth?

Rub the needle twice on the soap and you're ready to thread the needle!

Clean your watch. After wearing the watch for a long time, it will be stained with sweat, oil, and various dirty stains, which will affect the appearance very much. Don't wash with water, just rub the soap on the watch and wipe it off with a paper towel.

In two easy steps, you will have a new watch in no time!

Repair the walls. Nailing something to the wall can leave an unsightly hole that can seriously damage the quality of the home environment. You don't need to spend money to make it up, you don't need a little decoration, just rub the soap on the wall for a while.

Not only are the holes gone, but the walls are cleaner!

Cut the soap head into small pieces of soap about the same size, put it in a bowl and steam it through water. When everything is softened, cool it for a while, knead it into a ball with your hands, and it will become a large piece. We've always done that. If there is a mold, it is more beautiful to mold in the mold.

What do I do with the small bar of soap at home?

The leftover soap can be melted with hot water, and then kneaded neatly.

1. Find a basin and pour all the leftover soap flakes into the basin.

2. Pour in hot water, let the temperature of the hot water make the soap flakes soft and easy to flatten.

3. Take out a few thin soap sheets, put them in the palm of your hand, close your hands together and force the soap flakes to flatten out, and pay attention to bite evenly.

4. When pressing the soap flakes hard, there may be a situation where the middle is thin and the ends are thick, you can pinch it by hand, adjust the length of the soap, and make the thickness the same, so that the soap made looks better.

5. Take out a few more soap flakes from the basin, put them in the middle of the unpinched soap, and continue to flatten them.

6. If there are uneven places around, you can use hot water to grind smooth, so that the intact soap is completed.

Summary. Method Step 1 Kitchen Cleaning: Place crushed soap in a bucket filled with hot water and add baking soda.

2. Shake it a few times to melt the soap, and then it can be used to clean various sanitary corners such as kitchen countertops. 3. Toilet fragrance: Collect the broken soap, put it in an elastic mesh bag, put it in the toilet storage tank, the soap will slowly melt in the water, and you can clean the toilet with soapy water after each use of the toilet.

4. Wardrobe fragrance: cut the broken soap into silk and pack it in a mesh bag to become a sachet, and put it in the wardrobe to add fragrance to the wardrobe. After the fragrance slowly fades, it can be used as a hand soap.

5 becomes a large soap. Put the crushed soap together and boil it in water, pour it out when it is almost soft, and shape it according to your preference. Note:

Don't wait for it all to melt, it's almost soft. 6. Turn into soapy water. Boil the broken soap with water to make soapy water, put it in a bottle, and use it at any time.

7 soap bags. It can be used in scenes such as using a thin cloth bag to pack shredded soap and brush shoes.

Can you tell us more about that?

Method Step 1 Kitchen Cleaning: Place crushed soap in a bucket filled with hot water and add baking soda. 2. Shake it a few times to melt the soap, and then it can be used to clean various sanitary corners such as kitchen countertops.

3. The toilet bowl is fragrant and vertical: Collect the broken soap, put it in an elastic mesh bag, put it in the toilet storage tank, the soap will slowly melt in the water, and after each use of the toilet, you can clean the toilet with jujube soapy water. 4 wardrobe fragrance:

The broken soap is shaved into shreds, packed in a mesh bag to become a sachet, and put it in the wardrobe to add fragrance to the wardrobe. After the fragrance slowly fades, it can be used as a hand soap. 5 becomes a large soap.

Put the crushed soap together and boil it in water, pour it out when it is almost soft, and shape it according to your preference. Note: Don't wait until it's all melted, just about soft.

6. Turn into soapy water. Boil the broken soap with water to make soapy water, put it in a bottle, and use it at any time. 7 soap bags.

It can be used in scenes such as using a thin cloth bag to pack up broken soap and brush shoes.

1. Insecticides.

After the furniture is eaten by moths, plugging the hole with soap can suffocate the moths and kill them, such as pouring a strong soap injection into the moth's nest, which can kill the moths.

2. Relieve itching. Just apply soap to the mosquito bite to relieve itching. Mosquitoes secrete formic acid when they bite, while soaps are alkaline and they undergo an acidic neutralization reaction.

3. Isolation agent.

When brushing paint, apply some soap to the nails, so that the paint will not easily penetrate into the nails.

4. Lubricate the zipper.

If the zipper of the bag is always stuck, you only need to smear the zipper of the bag with soap, and then pull the zipper to solve the problem of the zipper being stuck.

5. Remove the dirt at the bottom of the pot.

Soot from the bottom of the pot is the most difficult to remove, so if you apply a layer of soap to the bottom of the pan before use and wash it after use, you can reduce the build-up of soot at the bottom of the pot.

1. The soap that is being used should be placed in the soap box after each use, and when purchasing a soap box, you should choose a soap that can filter water at the bottom. In this way, the excess water on the surface of the soap can be filtered out through the soap tray, so as to prolong the life cycle of the soap and prevent the soap from softening due to moisture.

2. In order to avoid storing a large number of bacteria in the soap box, the soap box should be cleaned at least once a month for disinfection.

3. When storing soap, we should be careful not to put the soap next to the pool, because the humidity next to the pool is high, and the soap can be stored in the cupboard.

4. The surface of the soap will crack under sunlight, which will reduce the cleaning strength of the soap, and also reduce the sterilization effect of the soap, so the soap should be avoided from direct sunlight.

Categories: Lifestyle >> Lifestyle Encyclopedia.

Analysis of the wheel mu: It is a pity that the broken soap that is usually left behind is lost, and the following are several ways to process broken soap.

1 Modified into a large soap. Put the broken soap together with some water, cover it, put it on the fire and cook it until it is soft, be careful not to boil it until it is completely dissolved, and pour it out to make a soap shape when it is not hot, and dry it to use.

Or collect the discarded soap, put it in a small bowl, and heat it in the microwave for 1 minute. When the soap is completely melted, pour it into a container and place it in the refrigerator to cool. Half an hour later, a new bar of soap was "baked".

2 Make a soap bag. Sew a small pocket with gauze or a thin cloth, put the soap head in it, hang it on the washbasin shelf, and wipe it with your hands a few times when you use it.

Put the leftover crushed soap cubes into the broken ** and tie the ends tightly. Rubbing the bag when washing your hands is a great way to remove stains. It saves soap and is convenient to use.

3 Make soapy water. Boil the soap head with water to make soapy water, put it in a clean bottle, and take it as you go.

The making of soap.

1.Principle. Fat and sodium hydroxide are boiled together and hydrolyzed into sodium and glycerol, which are processed and molded into soap.

Dismissal Jane 2Supplies.

150 and 1 300ml beaker, glass stick, alcohol lamp, asbestos net, tripod, lard (or other animal or vegetable fat or oil), NaOH, 95% alcohol, saturated salt water.

3.Operate. 1) In a 150ml beaker, hold 6 g of lard and 5 ml of 95% alcohol, then add 10 ml of 40% NaOH solution. Stir with a glass rod to dissolve it (heat over a slight heat if necessary).

2) Place the beaker on an asbestos net (or in a water bath) over low heat, stirring constantly with a glass holder. During the heating process, if the alcohol and water are evaporated and reduced, they should be replenished at any time to maintain the original volume. For this purpose, a mixture of alcohol and water (1 1) 20 ml can be pre-prepared for addition.

Take out a few drops of the sample from the rod and put it into the test tube, add 5 6ml of distilled water to the test tube, heat and shake. When standing, there is oil separation, indicating that the saponification is incomplete, and the lye can be added dropwise to continue the saponification.

4) Slowly add 20ml of hot distilled water to the saponified viscous liquid and stir to make them miscible. Then slowly pour the viscous liquid into a 150ml hot saturated salt solution, stirring as you go. After standing, the soap and stool salt stockings and pants are precipitated and floated, and the soap can be taken out with a glass rod after all the soap is precipitated and the bridge is solidified, and the soap is made.

2) If you do not use a water bath, you must use low heat.

3) During the saponification reaction, the original volume of the mixture should be maintained, and the mixture in the beaker should not be boiled dry or splashed outside the beaker.