How to iron trousers, small ways to iron trousers

Updated on vogue 2024-03-21
14 answers
  1. Anonymous users2024-02-07

    Ironing trousers should be from the inside out: the order is as follows: turn the pants over - open the pockets - first iron the trousers near the stall (the pp part can be basically solved.)

    Of course, professionals will use a tool called 'cloth steamed bun' to solve the ironing problem in this area) - followed by the pockets - the corners of the trousers - the seams - then the front - the whole trouser cuff - then the inside of the right foot - the outside of the right foot - the inside of the left foot - the outside of the left foot - and finally the two corners of the trousers are put together to finish. Precautions: The pleat can be fixed with a pin; Dark-colored fabrics or fabrics that are easily polished by the iron are best re-ironed with a hot cloth.

    Can trousers be washed? The washing of trousers should refer to the washing instructions in the label of the garment, because the washing method of trousers of different clothing materials will be different.

    For example, the suit pants ---wool-polyester blended" of "wool-polyester blend" are currently a more popular fabric, which has the luxury and comfort of wool, but also has good wrinkles and polishing, and is also easy to take care of. Some brands require "no more than 30 degrees Celsius and need to be hand washed" - washing is OK. But it is recommended to go to the dry cleaner for dry cleaning, because the difference between washing and dry cleaning is still obvious, even if the washing is "dried with water", there will be wrinkles, and when you get the dry cleaner for dry cleaning, the dry cleaning staff will iron for you to ensure a straight effect.

  2. Anonymous users2024-02-06

    1. First of all, adjust the temperature of the iron to the temperature corresponding to the fabric of the garment The order of ironing clothes is first the trouser hem, the trouser leg turns the pants in turn to separate the seams to both sides, and flattens them with the iron.

    2. For the hemp material that is more resistant to high temperature and is not easy to shape, if our iron is not steamed, then cover it with a wet towel on the fabric of the clothes, and then ironing can play a role, and the steam iron has the effect.

    3. Turn the pants over and align the seams on both sides of the trouser cuffs to flatten the trouser cuffs, and then iron the two trouser legs up.

    4. Then put the pants on the ironing board, iron the buttocks of the pants, because the buttocks are rounded, it is best to have a hot bag at that time, if you don't use cushions, you can also put the pants round and late belt on it for ironing.

    5. Then the waist of the hot pants, the placket part, too, it is best to put on a wet towel first, and then use an iron to iron.

    6. In the whole process of ironing, people can not leave, if they leave, they must pull out the iron plug, or put the iron on the iron stand, and the ironed clothes should be hung up with a shelf. The moisture on it is dissipated, and then put it in the wardrobe for storage.

  3. Anonymous users2024-02-05

    The recurrence of such problems is usually caused by the difference in the internal and external materials of our Xiku, and when we adjust the leveling level, the two materials will change due to the difference in temperature.

  4. Anonymous users2024-02-04

    1.Iron the pockets.

    Start by turning your trousers inside.

    Pull out the back pocket separately, flatten it and iron.

    When ironing the side pockets, you need to use the corner of the ironing board to ensure that the entire pocket is covered.

    2.Flatten trouser stitching.

    At this point, the trousers are still on the reverse side, straighten the trouser leg so that the seam is in the middle and the trouser line is on both sides.

    Use the iron to flatten along the seams of the pants and do not let the seams stand up or crooked to the side.

    3.Iron the cuffs of the trousers.

    Turn your pants up to the front and lay them flat on the ironing board. To make sure that the line of the pants is on both sides and there is no offset, then use an iron to flatten the hem repeatedly.

    Tips: When the trousers are turned to the front, the ironing should increase a little steam at this time, and it is best to pad a piece of white cotton cloth on the ironing part to prevent the dark wool trousers from causing the "aurora" phenomenon due to the high temperature. )

    4.Iron the trouser line.

    Next, the ironing is carried out along the trouser line. Be careful: the trouser line may not be so obvious after wearing it for a long time, so be careful not to deviate when ironing, and you can use your other hand to "guide the way" in front of you.

    After the trouser line is ironed, remember to check the trouser leg for any creases, and if so, do partial ironing.

    5.Iron the line of the trousers at the junction with the pleats.

    Next, deal with the connection between the trouser line and the trouser pleats, and pull the trouser waist to fix it when ironing to ensure that the trouser pleats and trouser lines are on the same horizontal line.

  5. Anonymous users2024-02-03

    Fold the pants horizontally in half so that the two legs are stacked on the ironing board. Fold the top leg up, iron the bottom tube with an iron, from the hem to the crotch, and then turn the pants over so that the leg you just folded up is flat.

  6. Anonymous users2024-02-02

    1. Usually, there are two middle seams in one trouser leg, first align the middle seams, and then align the pants as well;

    2. Clamp the ends of the trousers with the clips of the garment steamer, and then pull the pants down to let them sag, but be careful not to use excessive force to avoid breaking the clips.

  7. Anonymous users2024-02-01

    If you have a steam iron at home, you can clip your pants up with clips. Slowly back and forth. Fold the underwear with the steam of the iron. Screed. Because it's steam, there's no need to worry about burning your pants. Suspended steam iron. A must-have for the family.

  8. Anonymous users2024-01-31

    1. Dry cleaning: You can choose dry cleaning, so that you can achieve a better washing effect and state for suit pants.

    2. Hand washing: you can wash by hand, hand washing can be soaked in salt water to prevent fading, after scrubbing with soap powder, rinse twice with water, wring out the water, and ironing after drying.

    3. Machine washing: It can be put into the washing machine for machine washing, and the machine washing can be done with neutral detergent, which has a good protective effect on the fabric of the trousers.

    4. Laundry bag: Machine washing can use a laundry bag to put the trousers in, which can reduce the twisting of the trousers during the washing process and reduce the cost of ironing time in the later stage.

  9. Anonymous users2024-01-30

    How to iron your pants in three minutes.

    1.Turn your pants upside down and iron the inside pocket.

    2.Turn the pants back to the front, put the pants into the ironing board, place a piece of cloth, and iron the pants and folds until they are straight.

    3.Fold the trouser tube in half, so that the suture line is on the **, the trouser line is on both sides, put the cloth, iron from the inside of the surface of the trouser tube to the outside, and iron the trouser line vigorously, and then iron the bottom surface of the trouser tube.

  10. Anonymous users2024-01-29

    1. Check the fabric of the pants and the precautions for ironing, many pants will be marked on the label.

    2. Fill the steam compartment of the steam engine with water and turn on the steam engine. Set the temperature at which the fabric is suitable, and if you are unsure, turn it down as much as possible.

    3. Iron the pockets first, because the pockets are the most prone to wrinkles, and uneven pockets will cause the entire pants to be uneven.

    4. Iron the trouser toe and trouser legs, and press with a steam engine for a few seconds in all folds.

    5. After ironing, wait for the pants to cool down before folding or hanging up, because if the temperature does not drop, folding will produce new creases.

    Precautions: Be sure to ensure that the pants are washed clean before ironing, otherwise the stain will be more difficult to remove after high temperature ironing.

  11. Anonymous users2024-01-28

    How to ironing the underwear:

    1. Jeans.

    Pinch the cuff of your pants with one hand and pull them down, trying to keep them as flat as possible. Then attach the steam nozzle to the pants, slowly move it up and down, rely on the high-temperature steam to soften the fabric, and then use the tension to shape the pants. When it reaches the hem of the pants, pinch both sides of the pants and pull them tight, and then iron them up and down.

    When ironing pants, you can press down a little harder, and the pressing time can be slightly longer. When ironing, be careful with the high temperature steam that comes out of the nozzle.

    2. Suit pants.

    Turn the pants upside down and iron the inner pants pocket straight; Put the pants back on the front and iron them from the inside to the outside of the leg surface, then iron the underside of the leg again. It is not suitable for direct ironing, and a thin cloth should be put on before ironing.

    3. Deformation pants.

    After wearing the pants for a long time, the knee area will often be pushed up with a large bulge, for this kind of pants that have been deformed, it is best to use an electric steam iron. Iron the back half of the pants first, straighten the back half of the pants with your hands, and then iron the folds until the back half of the pants returns to its natural state. Then iron the front half of the pants.

    When ironing, the front half of the knee is already bulging, and if you straighten the pants, the front half will be wrinkled. At this time, you should first iron from the upper and lower parts of the pants, and the iron should be gently placed on the pants first, and the steam switch should be pressed to make the wrinkled parts naturally retract under the heat of the iron. The same method is applied to the knee area, when the big bulge becomes a small bulge, continue to use the above method, and so on, you can all return to the original shape, and finally iron the whole pants again.

  12. Anonymous users2024-01-27

    Try it in the freezer compartment of the refrigerator for 2 hours, and if you take it out and rub it and can't fall off, I won't have a trick.

  13. Anonymous users2024-01-26

    Oh, you have to wet your pants with some water first, and then use a hot water kettle, no iron, it's so stupid, it's very simple.

  14. Anonymous users2024-01-25

    It's easy! What an iron! If you don't, there is one less pot of boiling water! Premise put the pants flat.

Related questions