What is the effect of using flavor gum powder?

In many incense users to buy the most important raw material for incense making is to make incense gum powder, always want to buy the best low viscosity good rubber powder, so as to reduce their product costs, now the market uses two kinds of rubber powder chemical rubber powder and vegetable rubber powder, plant rubber powder is now also very scarce, pure plant rubber powder is now very few, chemical rubber powder to amide mainly has a lot of drawbacks, made of incense gray black, easy to resurge, the surface is coarse, etc., this writing problem can be solved on the basis of increasing excipients, In the past, when we used vegetable rubber powder, it did not appear again, and I hope that everyone can use the right one by themselves. When using chemical glue powder amide, there are fine powder and particles, we should choose according to their actual situation, the large particles must be long when stirring, and they may not be dissolved well, and the best effect can not be achieved, the fine powder dissolves quickly, but the fine powder is crushed by the particles, and it reduces the viscosity itself, and the viscosity of the fine powder is not as large as the viscosity of the particles to reduce the cost. Now elm surface is less and less, basically no, some on the market are impure synthetic, in the use of chemical rubber powder when the use of plant rubber powder effect is also very good, plant rubber powder can be a good solution to the use of chemical rubber powder in the process of unsatisfactory problems, plant rubber powder in the surface smooth, summer resurgence has a good performance, in the market trading is also welcome, plant rubber powder burning will make people feel very fragrant and comfortable smell, but chemical rubber powder is not available, it is no fragrance, only choking smellI still hope that everyone will use the developed plant rubber powder to replace the product, and protect the ecological environment. Don't be like the elm tree, as others say, it's all called incense, it's hard to see now.

Spice gum powder can be used in the production of strip incense, pan incense, stick incense, mosquito incense, sanitary incense, Buddha incense, bamboo stick incense, etc., and can effectively replace ordinary starch, elm bark powder, bakelite powder and methyl cellulose (CMC) and other coherent adhesive materials; In the production of sanitary incense and Buddha incense, the utilization of elm bark powder and bakelite powder is added to the production of machine-made incense and tower incense; When producing incense, it can partially replace hemp skin powder. The appearance of incense products is smooth and smooth, good molding, and not easy to break; In particular, its cold water can be gelatinized, no need to boil paste, the material is directly mixed and evenly mixed, and the water can be mixed and stirred, and the material after adding water and miscellaneous dishes will not have the signs that the material can not be used dry and hard compared with the eternal catastrophe, which effectively saves energy and facilitates the production operation.

It has been confirmed that the surface of the incense blank (incense product) made of incense gum powder is smooth, no fracture, no mildew, strong bending resistance, good product color, no fading after baking, sufficient ignition time, good flammability, and no "broken end" of the iron toothed disc.

It is conducive to the improvement of the volatilization rate of the active ingredients of mosquito coils and the loss of the finished product in the drying process. In addition, the production of flavored gum powder has no pollution to the environment.

First of all, let's talk about the characteristics of flavored gum powder: good solubility, high viscosity, strong toughness, flammable (less) smoke, no peculiar smell when burning, non-toxic, etc.; The performance of plant-based gum powder products is stable, which avoids the uneven bonding quality of other plant-based gum powder and ordinary starch due to different origins and times, and the need to repeatedly debug the formula during the production of incense industry, so as not to cause unstable product quality; The appearance of plant-based incense gum powder incense products is smooth and smooth, good molding, and not easy to break; In particular, its cold water can be gelatinized, no need to boil paste, the material is directly mixed evenly, water can be stirred, and the material after adding water and mixed for a long time will not have the phenomenon that the material can not be used dry and hard, which effectively saves energy and facilitates the production operation.

For example, sandalwood gum powder has a calming effect, which can relieve mental tension and anxiety to a certain extent, and achieve the effect of clearing the mind and calming the nerves. It also has the effect of clearing blood and anti-inflammatory, which can improve cystitis. Antibacterial and anti-itching, can inhibit bacteria and promote wound healing.

Sandalwood powder can also effectively repel paint, alcohol, tobacco and mildew odors.

Hope it helps.

Summary. The first trick: raw rubber system.

The combination of rubber and plastic is also a very common method, and the use of high styrene, PVC NBR alloy effect can also be hardened.

Changing the grade can also increase the hardness (less commonly).

The second trick: vulcanization promotion system.

By increasing the vulcanizing agent to increase the density of the cross-chain and improve the hardness, such as increasing the amount of sulfur used by increasing significantly.

In the production of recycled rubber products under the condition that other materials remain unchanged, adding the corresponding amount of sulfur can improve the hardness of rubber products to a certain extent. (100 parts of glue, up to 4 5 parts of sulfur).

2) Add resin. In the manufacture of recycled rubber products, resin is added to increase the hardness of rubber products.

3) Secondary vulcanization of some products increases the degree of cross-linking and improves the hardness.

The third trick: strengthen the filling system.

Add carbon black. Carbon black can be used as a filler for rubber mixtures to change the hardness of rubber products.

The hardness of carbon black can also be greatly increased under the premise that the glue content remains unchanged.

Adding rubber powder, the hardness becomes higher, and the effect is also very good, but it is only suitable for molded products.

The fourth trick: plasticization and softening system.

Reduce the amount of rubber oil used. Rubber oil has a softening effect, and expands by heat when added to rubber products, reducing the interaction force between polymers. Reducing the amount of rubber oil is equivalent to reducing the softening effect of rubber products and improving the hardness.

How to improve the hardness of flavor gum powder.

Hello, I have seen your question and am sorting out the answer, please wait a while

Good. The first trick: raw rubber system 1) The combination of rubber and plastic is also a very common means of changing filial piety, and the use of high styrene, PVC NBR alloy effect can also be hardened.

2) Change the way of rubber grade, you can also improve the hardness (less used) The second trick: vulcanization promotion system 1) Increase the density of the cross-chain by increasing the vulcanizing agent, improve the hardness, such as increasing the amount of sulfur used in the production of recycled rubber products, etc., under the condition that other materials remain unchanged in the production of recycled rubber products, adding the corresponding amount of sulfur can improve the hardness of rubber products to a certain extent. (100 parts of glue, sulfur dosage up to 4 5 parts) 2) Add resin.

In the manufacture of recycled rubber products, resin is added to increase the hardness of rubber products. 3) The secondary sulfur nuclear draft of some products increases the degree of cross-linking and improves the hardness. The third trick:

Reinforcing the filling system: 1) Add carbon black. Carbon black can be used as a filler for rubber mixtures to change the hardness of rubber products. 2) The hardness of carbon black variety can also be greatly increased under the premise that the glue content remains unchanged.

3) Add rubber powder, the hardness becomes higher, and the effect is also very good, but it is only suitable for molded products. The fourth trick: plasticizing and softening system to reduce the amount of rubber oil.

Rubber oil has a softening effect, and expands by heat when added to rubber products, reducing the interaction force between polymers. Reducing the amount of rubber oil is equivalent to reducing the softening effect of rubber products and improving the hardness.

Sticky gum powder belongs to vegetable gum powder. Chemical glue is based on amide.

The performance of plant-based incense powder products is stable, and the appearance of its incense products is smooth and smooth, good molding, and not easy to break; In case of cold water, it can be gelatinized, no need to boil paste, the material is directly mixed evenly, and the material can be produced by adding water and stirring for a long time, and the material after adding water and mixing will not have the phenomenon that the material is dry and hard and cannot be used, but the pure vegetable rubber powder is now very little.

There are many drawbacks of chemical glue powder based on amide, which is gray and black, easy to regain moisture, and has a coarse surface. When using chemical glue powder amide, there are two fine powder and particles, to choose according to their actual situation, the large particles must be long when stirring, and they may not be dissolved well, and the best effect can not be achieved, the fine powder dissolves quickly, but the fine powder is crushed by the particles, which will reduce the viscosity itself, but the viscosity is not as large as the particles.

The surface of the vegetable rubber powder is smooth, which can solve the problem of resurgence in summer, and the vegetable rubber powder will emit a very fragrant and comfortable smell when burning, but the chemical rubber powder will not, it has no fragrance, only a choking smell.

So I personally think that sticky wood gum powder is better.

1. To distinguish whether the flavored gum powder is adulterated, you only need to add the same amount of water and wood powder to the rubber powder, and the viscosity is large.

2. Plant-based incense gum powder is suitable for the production of various disc mosquito coils, sanitary incense, grass incense, incense sticks, bamboo stick incense, Buddha incense, etc., which can effectively replace ordinary starch, elm bark powder, bakelite powder and methyl cellulose (CMC) and other related adhesive materials; For example, in the production of micro-smoke mosquito coils, it can replace ordinary starch, elm bark powder, bakelite powder, etc.; In the production of smokeless disc mosquito coils, it can replace methyl cellulose, (CMC) and other chemical binders; In the production of sanitary incense and Buddha incense: the addition of this product can greatly reduce the use of elm bark powder and bakelite powder when producing machine-made incense and tower incense; When planting aromatic gum powder is produced, it can partially replace hemp skin powder (cotton stone powder) and so on.

3. The characteristics of the flavor gum powder product: good solubility, high viscosity, strong toughness, flammable (less) smoke, no peculiar smell when burning, non-toxic, etc.; The performance of plant-based gum powder products is stable, which avoids the uneven bonding quality of other plant-based gum powder and ordinary starch due to different origins and times, and the need to repeatedly debug the formula during the production of incense industry, so as not to cause unstable product quality; The appearance of plant-based incense gum powder incense products is smooth and smooth, good molding, and not easy to break; In particular, its cold water can be gelatinized, no need to boil paste, the material is directly mixed evenly, water can be stirred, and the material after adding water and mixed for a long time will not have the phenomenon that the material can not be used dry and hard, which effectively saves energy and facilitates the production operation.

There are many incense companies that don't dare to ask your question, I dare. The answer is: glue powder - add the same batch and the same amount of wood powder - add the same amount of water - compare to see who is stickier.

Summary. White glue powder is the raw material for making glue. White glue powder can be widely used in bonding paper products (wallpaper), and can also be used as an adhesive for waterproof coatings and wood.

White glue powder is made of water as a dispersant, which is safe, non-toxic, easy to clean, and cured at room temperature. The white glue powder has good adhesion to wood, paper and fabric, and the glue bond strength is high, and the adhesive layer of the white glue powder after curing is colorless and transparent.

White glue powder is the raw material for making glue. White glue powder can be widely used in bonding paper products (wallpaper), and can also be used as an adhesive for waterproof coatings and wood. White glue powder is made of water as a dispersant, which is safe, non-toxic, easy to clean, and cured at room temperature.

The white glue powder has good adhesion to wood, paper and fabric, and the glue bond strength is high, and the glue layer of the white glue powder is colorless and transparent after curing.

Whether it is a chemical material. Yes.

Plant-based gum powder is suitable for the production of various disc mosquito incense, sanitary incense, grass incense, incense sticks, bamboo stick incense, Buddha incense, etc., which can effectively replace ordinary starch, elm bark powder, bakelite powder and methyl cellulose (CMC) and other related adhesive materials; For example, in the production of micro-smoke mosquito coils, it can replace ordinary starch, elm bark powder, bakelite powder, etc.; In the production of smokeless disc mosquito coils, it can replace methyl cellulose, (CMC) and other chemical binders; In the production of sanitary incense and Buddha incense: the addition of this product can greatly reduce the use of elm bark powder and bakelite powder when producing machine-made incense and tower incense; When planting aromatic gum powder is produced, it can partially replace hemp skin powder (cotton stone powder) and so on. Product features of flavored gum powder:

It has the characteristics of good solubility, high viscosity, strong toughness, flammable (less) smoke, no peculiar smell and non-toxic combustion; The performance of plant-based gum powder products is stable, which avoids the uneven bonding quality of other plant-based gum powder and ordinary starch due to different origins and times, and the need to repeatedly debug the formula during the production of incense industry, so as not to cause unstable product quality; The appearance of plant-based incense gum powder incense products is smooth and smooth, good molding, and not easy to break; In particular, its cold water can be gelatinized, no need to boil paste, the material is directly mixed evenly, water can be stirred, and the material after adding water and mixed for a long time will not have the phenomenon that the material can not be used dry and hard, which effectively saves energy and facilitates the production operation. Because China's sanitary incense industry is still in the initial stage of development, it is not yet able to constitute a scope and consumer consumption like other mature industries, so the industry has a large space for development. With the progress of people's life and death level, the further opening of religious beliefs, the demand for various incense products is increasing, and incense is a disposable consumer product, all over the country regardless of the Spring Festival, Qingming, July and a half, pray to God and worship Buddha, store opening, etc.

The incense gum powder is suitable for various incense types such as strip incense, plate incense, stick incense, mosquito incense, bamboo stick incense, etc. This product has high viscosity, is easy to use, and can greatly reduce production costs compared with traditional processes. The finished incense product after using this product has the characteristics of gray and white, good bending resistance, strong flexibility, etc., and this product is mainly used in the incense industry.

High viscosity and low dosage. Low cost. It is an indispensable material for the incense industry.

This product completely replaces elm bark powder. The incense made of incense raw materials with it has no peculiar smell, gray and white, hard strength, moisture resistance, folding resistance, non-toxic to the human body after combustion, safe and hygienic, and in line with the national green environmental protection quality monitoring standards. And it can greatly reduce production costs and improve your economic benefits.