How to distinguish left and right when reversing, and how to distinguish left and right when reversi

In the process of reversing, the head must be stretched to the middle of the width of the car, with the eyes to the midpoint of the tail has been aligned with the midpoint of the garage bottom of the straight line, then the direction is correct, if you find that the tail of the car slowly deviates to a certain side, it proves that the direction is not correct. In addition, when the tail has been put into the garage, the front of the car has not been put into the garage, if the tail is biased to the side of the side, the reason is that the timing of returning to the steering wheel is too early, or too fast, that is, the midpoint of the tail has not been aligned with the midpoint of the bottom of the garage, you put the steering wheel back to the right, you analyze, the car at this time is not oblique to the side of the side On the contrary, in the rear of the car has been put into the warehouse, when the front is not in the garage, if the tail is biased to the side of the center line, the reason is that the timing of returning to the steering wheel is late, or too slow. That is to say, the midpoint of the rear of the car has been aligned with the midpoint of the bottom of the garage, the steering wheel of your car has not returned to the right, you analyze it again, the car at this time is not obliquely biased to the center line Therefore, in the process of reversing in a straight line, use your eyes to align the midpoint of the tail of the garage has been aligned with the midpoint of the bottom of the garage, the swing amplitude of the left and right must be controlled within 10 cm, once beyond 10 cm, when you adjust the direction, the front of the car will swing left and right, and the amplitude of its left and right swing will be much greater than the amplitude of the left and right swing of the tail, so, It is easy to hit the bar when the front of the car is not in storage.

If the front of the car has been into the garage it is very easy to get out of the line, which requires you to pay attention to every moment of reversing, once you find that there is a deviation, you must adjust the direction in time and quickly, so that the midpoint of the tail, in the process of reversing in a straight line, always aim at the midpoint of the bottom of the garage.

The mirror on the left is a flat mirror. What is seen is the actual distance. The pre-knitted mirror is a bit convex. It's not the real distance, so it's good to take the left side as the standard, and when you reverse into the warehouse, you can go back to the right direction when you are almost parallel to the sideline.

When reversing, try to slow down as much as possible, about the same speed as a person walking. Look at the rear and sides of the car from the mirror, and if you want the rear to turn to the left, turn the steering wheel to the left, and vice versa.

If you reverse to the right, you will hit the direction of the right, and if you reverse to the left, you will hit the direction of the left.

Hello. Same as when moving forward. Hope it helps.

Hello, the distance between the body and the sideline from the exterior mirror, if my answer is helpful to you, please set it to.

When reversing, the steering wheel is hit to the left, and the rear of the car will be to the left; If the steering wheel is to the right, the rear of the car will be to the right; That is to say, the direction of movement of the wheels is the same as the direction of your steering wheel, and when reversing, look in the rearview mirror and feel that the distance between the cars is wide, so you will hit the steering wheel in which direction. In other words, when you are wide on the right, you have to hit the steering wheel to the right, look in the mirror, and then go back to the steering wheel when the body is about to correct (you can go back as much as you just hit).

When the right garage is reversed, observe the left rearview mirror before the steering wheel is not played, and then observe the right rearview mirror after the steering wheel is killed to the right, and then observe the left rearview mirror when returning to the center, and then observe the left and right after confirming that the front and rear wheels can enter the garage, and carry out body fine-tuning.

Precautions for reversing.

Do not keep looking at the back of the car during reversing, and on the premise of confirming the safety of the rear of the car, you need to observe the left and right rearview mirrors from time to time, pay attention to the distance between obstacles and the body, and use the steering wheel to correct the position of the car when the car is retreating.

If you feel that the front of the car may hit an obstacle during reversing, you also need to look in front of the car at the appropriate time. Especially in the case of a large rotation amplitude of the steering wheel, because the turning radius of the steering wheel is greater than the turning radius of the rear wheel during the steering process, and the head of the car is thrown outward when reversing, so it is necessary to pay attention to the front of the car to avoid rubbing.

Which direction the steering wheel hits, the rear of the car will go in which direction, the steering wheel will hit the left, the rear of the car will move to the left, the steering wheel will hit the right, the rear of the car will move to the right, and the turn signal needs to be turned on before reversing, mainly to remind other vehicles, if you move to the left, you will turn left, and if you move to the right, you will turn right.

It has been found that if you think of the steering wheel as the dial of a clock, the left hand is held.

Between nine and ten o'clock, the right hand is held.

Between three and four o'clock, it is most reasonable to operate the steering wheel with both hands in a left high and right low shape; If the steering wheel is affected by the convex and concave road surface, causing the front wheels to be deflected by shock vibration, the steering wheel should be held tightly to prevent the steering wheel from turning around due to the violent vibration of the vehicle and injuring your fingers or wrists.

Precautions for reversing.

When reversing, the speed must be uniform, not more than 5 kilometers per hour, not fast and slow, to prevent the reverse from extinguishing or reversing too violently and rushing backwards, and even causing accidents.

When reversing, try not to affect the passage of other vehicles. If you encounter an oncoming car, you should take the initiative to stop. Be cautious when there are people or other obstacles nearby, especially for children, and honk their horns in advance to prevent injury accidents.

Hello dear, for those who can't tell the left and right in response to your problem, you only need to remember one thing when reversing: which way you want the rear of the car to go, hit the steering wheel in which way. Here's an example:

When reversing, the front of the car deviates to the left, indicating that the rear of the car is deviated to the right, so you must find a way to reduce the angle of the rear tilt to the right, and at this time, you must hit the steering wheel on the left. If you can tell the difference between the left and the right, turn the steering wheel to the left, and the car will be to the left. Turn the steering wheel to the right-hand side and the vehicle will be to the right.

Hello! It's the same as moving forward, if you want to go to the left, go to the left, go to the right, go to the right, I hope my answer is helpful to you, I wish you a happy car.

Put it down there, go in the direction of that hit, if you have any questions, please ask.

In recent years, with the continuous issuance of the reversing image, more and more car buyers have gradually applied this easy-to-use parking assistance system software. But I believe that you are not very familiar with the role for the first time, it is very likely that the bucket calendar is not very comfortable in the application, especially the understanding of its direction, then at present, let's take a look at the up and down direction of the reversing image, and some tips for reversing into the warehouse.

The difference between the up and down directions of the reversing image.

When the reverse gear is engaged, the reversing image will turn on by itself. Because according to the interface of the rear camera car, if it is displayed on the display screen at the same time, the interface and the actual situation of the reverse will often appear, and in order to better the driver can be more visual, convenient and quick to distinguish the direction of reversing, also in order to make the observation interface not that weird, the reversing image will generally be the interface to do the mirror system to solve, in that way, the up and down direction on the display screen matches the real two sides of the driver. (The left side of the display matches the driver's left, while the right side of the display matches the driver's right).

The simulated driving trajectory in the reversing trajectory system software is not excluded, when we hit the direction to the left, the simulated trajectory is offset to the left, and when we play the direction to the right, the simulated trajectory is offset to the right.

Reversing the image is like reversing into the garage tips.

1.Clever use of reversing to simulate driving trajectory: When you are reversing, you can predict the way of driving according to the reversing trajectory system software, which can greatly play a role in our control of the car's posture when reversing.

2.Clever use of reversing simulation spacing marking line: in the reversing trajectory system software, generally by the hue is divided into "green", "yellow", "red" three horizontal lines indicate the simulation spacing identification.

Among them, the blue line to the double yellow line area means that the distance is still too far away, and you can reverse; The area from the double yellow line to the red bar indicates that the distance is slowly approaching, so you should pay attention to the observation and control the reversing speed; In the end, the red bar area means that the large reversing limit has already been achieved, and if the car is reversed again, it is very prone to risks such as collision or collision.

Millions of car purchase subsidies.

Note that the car is mainly on the right, when the car drives into point B, the steering wheel is killed to the right first; When the distance between the body and the right front corner is two fingers (3cm) observed through the right rearview mirror, the steering wheel turns back (the logo is downward) and continues to fall; When the library angle coincides with the lower edge of the rearview mirror, the steering wheel makes a circle to the right (at this time, the steering wheel is full); When the yellow line in the garage is parallel to the body, return to the steering wheel.

The steering wheel is mainly left-handed, and when the left interior door handle crosses the left yellow line, the steering wheel hits 1 4 turns to the left; When the left rear tire is driven to a straight line with the garage angle, the steering wheel is full to the left; When the lower edge of the window passes the angle of the yellow line, keep the state and reverse back to the warehouse; From the rearview mirror, observe the yellow line in the garage parallel to the body, back to the steering wheel; Out of the A library, that is, from the left rearview mirror to see the left rear wheel and the library angle in a straight line, the steering wheel to the right full.

The direction has not yet reached the point that the coach said (play early), remember to return to the direction early; The steering wheel is more than a point before playing (playing late), remember to go back to the steering wheel after a point and then go back; Observe from both side of the rearview mirror to see which side of the rear wheel track yellow line is wider, the steering wheel to which side, at the same time, the correction is less than 1 4, slowly corrected.

1. When reversing, the front of the car deviates to the left, indicating that the rear of the car is deviated to the right, so the rear of the car should be left and the steering wheel should be left.

2. If the body is on the left, it must be moved to the right, and the steering wheel is right; Otherwise the opposite is true; It doesn't matter if it's going forward or backward.

3. You just need to remember that the rear of your car will go to whichever side of the state bridge you want to go, your steering wheel will hit whichever side.

Basic essentials of reversing skills:

When entering the parking lot, first of all, you should visually check the width of the parking space, whether there are obstacles behind it, whether there are cars parked on both sides, and whether the length is in line with your own model. At night, when you can't see clearly, come down to observe the exact location and then pour down.

When reversing, try to reverse from the left side (if possible). The left side is convenient for the reversing person to observe, and in the process of reversing, you should first look at the back, and then pay attention to the rearview mirrors on both sides. The lateral distance on the right side is greater than on the left.

Because the turning radius of the front wheels is larger than that of the rear wheels, the front of the car will be thrown outward when reversing, and it is easy to scratch on the right side if you do not pay attention to this.

The speed in reversing is mainly idling, and the body is corrected in time. The reference point of each brother is different, and the timing of the direction is different, so I will not generalize here. Sometimes they stop in a straight line along the shoulder, often reversing into the position between parked vehicles.

This kind of reversing is difficult, and someone must be on the side to command. Pay attention to the lateral distance from adjacent vehicles when reversing.

From the rearview mirror, when you see the rear of the car almost to the shoulder of the road, you quickly turn the direction to the road, and when the body is right, you can quickly return to the direction, and don't forget the distance from the car behind when reversing. If you can't grasp the distance between the cars, you can go down and take a look before reversing. Hit the direction quickly during the reversing process so that the body can be aligned in a short time.

Sometimes a forward and backward car may not be put in the right place, and it takes many times to park the car.

Remember, when parking in a straight line along the shoulder, be sure to park in the right direction, such as parking in the opposite direction will be deducted points and fines by the traffic police. When reversing, try to turn the front of the car towards a place with a wide line of sight and room for maneuver, so as to facilitate the observation of dynamic people or cars. Do not reverse in places where reversing is not allowed in traffic rules to prevent accidents.

If you want the rear of the car to go, hit the steering wheel in whichever way. Here's how:

1. When reversing, the direction is to the left, the rear of the car is to the left, the direction is to the right, the rear of the car is to the right, and the direction of the play is the same as the forward to master the basic technology: to put it simply, before reversing, calm down, pay attention to the surrounding environment, think clearly about the rear of the car to the left or to the right, the direction to the left, the rear to the left, the direction to the right, the rear to the right. At the same time, how much is the right direction, you need to find a good reference in the rearview mirror;

2. When correcting the body, when the tail is biased to one side, it should be back to the other side, (the body is biased to the left, it must be moved to the right, and the steering wheel is to the right, otherwise on the contrary, when you find that you are still biased to this side, you always think that you are wrong, in fact, it is true, only when the direction is back to the right, continue to play the direction to the other side to change the direction of the tail, and the direction of the return to the front can only reduce the amplitude of the tail deviation.