What should I do to solve the situation of white screen in HP notebook?

What's the deal with the white screen of an HP laptop? Some netizens have inquired about the problem of the white screen of HP laptops, and I hope the following information can give this netizen some help.

There are many reasons why the white screen of HP laptops in general may be due to this:

1.viral causes;

2.caused by a system crash;

3.The HP notebook hardware driver is not installed;

4.The hardware is not plugged in properly, such as the memory module of the HP laptop is not plugged in;

5.The reason for the hardware itself: it may be that the laptop motherboard has a problem supplying power to the screen or the graphics card chip is soldered.

The reasons and methods for the white screen of the HP notebook and the failure to boot up are as follows:

1) The first reason: when the main chip integrated block of the memory appears virtual soldering, or the performance is seriously poor, there will be a white screen or black screen during boot or operation, the solution: open the back cover, take out the memory module, erase it a few times with an eraser, and then plug it back, if it is still white, it means that there is a problem with the memory, and Jianyi repairs or replaces.

2) The second reason: the performance of the main chip of the graphics card is reduced, the chip resistors, capacitors, and transistors connected to the have problems, the BIOS of the graphics card is disordered, and the video memory is soldered, which will cause a white screen at boot, and if it is damaged, it will lead to a black screen. Solution:

Repair or replace the graphics card.

3) The third reason: the cable of the notebook is not in good contact, or it is damaged, resulting in a white screen on the display, or a black screen. Generally, when encountering such a phenomenon, it is to open the back cover of the notebook, re-plug the cable, and if it is damaged, replace the cable.

Common causes of white screen at boot:

Shenzhen Notebook Repair Center 400-669-99651, the screen cable is damaged or the contact is not good.

2. The screen itself is damaged.

3. There is a problem with the motherboard supplying power to the screen, and it is also possible that the power supply IC is faulty.

4. The screen cable of the notebook is not in good contact and is sent for repair for testing.

5. Caused by the virtual soldering of the graphics card chip, the virtual soldering of the graphics card refers to the poor contact between the BGA solder joint of the graphics card chip and the motherboard, which is generally caused by the high temperature of the graphics card and can only be sent for repair and testing.

6. If the heat dissipation device fails, it will affect the motherboard, and there will be problems with the motherboard, so you can go to the maintenance center to deal with it.

Summary. Dear, hello, I'm glad to answer for you, the method is as follows: 1. The white screen of the laptop can be repaired by pressing the F8 key.

2. First of all, press and hold the power switch to restart the computer and see if it can turn on. If the computer does not respond and cannot be started, continue to press and hold the power button and hold the F8 key to see if it can enter the safe protection mode. 3. If you enter safe mode, you can enter normal mode by selecting Reboot or Shut Down and Reboot.

4. If there is no response, it may be that the display screen is faulty and the display screen needs to be repaired. Hope it helps. Have a great day.

Dear, hello, I'm glad to answer for you, the method is as follows: 1. The white screen of the laptop can be repaired by pressing the F8 key. 2. First of all, press and hold the power switch to turn on the computer and see if it can be turned on.

If the computer does not respond and cannot be started, continue to press and hold the power button and hold the F8 key to see if it can enter the safe protection mode. 3. If you enter safe mode, Lu Ranxian can enter normal mode by choosing to reboot or shut down and restart. 4. If there is no early shooting response, it may be that the display screen is faulty and the display screen needs to be repaired.

Hope it helps. Have a great day.

Hello, there are several reasons for the white screen of HP laptops and ways to solve the collapse: Display problem: It may be that the monitor itself is faulty or the cable is loose.

Try reconnecting the monitor cable to make sure it's secure. If the problem persists, you may need to replace the monitor or contact the after-sales service center for repair. Graphics card issues:

A faulty graphics card can cause a white screen. Try restarting your computer, enter safe mode or the BIOS interface, and see if the white screen still appears. If there is no white screen in Safe Mode or BIOS interface, it may be a problem with the graphics driver or Xiaoheng operating system.

Try updating your graphics card drivers or reinstalling your operating system. Memory issues: Memory failures can cause a white screen.

Try plugging the memory modules back in and out to make sure they're well connected. You can also try plugging a memory module into a different slot to troubleshoot the slot. If the problem persists, you may need to replace the faulty memory module.

Hardware failure: Failure of other hardware components, such as motherboard or power supply issues, can also cause a white screen. In this case, it is recommended to contact HP Nashenyuan's after-sales service center or professional technicians for further diagnosis and repair.

Software issues: Some software issues can also cause a white screen. Try going into safe mode, disabling recently installed software or restoring the system to a previous steady state.

If the issue is resolved in safe mode, it may be caused by a piece of software. If you still can't solve the problem after trying the above solutions, it is recommended to contact HP's after-sales service center or professional technicians for further technical support and repair. They will be able to provide more specific guidance and solutions.