Nokia C5 03 flash, detailed step 15

Precautions; 1. There is a risk in flashing, the mobile phone battery must be sufficient, the PC can not be suddenly powered off, and a clean PC system is the basic guarantee for flashing. I am not responsible for any failure to flash the machine. As long as you are brave and prepared, you will definitely succeed.

3. Before flashing, do not use the card, but in order to ensure that you get a clean system, it is recommended to check the card, and do not take out the memory card when flashing.

4. The problem of lock code, as long as your mobile phone has changed the default lock code (12345) before, after the strong brush, you have to enter the lock code, sometimes it is to enter it after brushing it up, and sometimes it is the second boot input. Entering the lock code refers to entering the lock code before you flashed the phone. If the default lock code is 12345 before brushing, you will generally not be asked to enter the lock code.

5. Close all anti-virus software and firewalls on the computer (running JAF when changing code may prompt that there is a virus, which is a false positive for anti-virus software, just delete the "JAF Repair" shortcut on the desktop).

6. A Nokia data cable, C5 driver, Phoenix flash software.

Phoenix flashing tutorial.

Click in a new window to view the full image Ctrl + mouse wheel to zoom in or out.

Tutorial on changing code with JAF.

1.Open JAF [this picture will only appear when it is run for the first time] (here you must pay attention to the computer side to close the ovi suite or PC suite).

2.Select Randow Pkey Thomas SN and JAF (Main) and click Go to run.

3.Select the BB5 tab in the top left, then prod. in the middle

The Saipan forum is very detailed and searchable for Saipan.

The C503 has a small screen and a small memory, so it is not recommended to brush.

Flash or upgrade,Two concepts of oh,Upgrade the phone input m 0000 to view the version on it,Flashing is more troublesome,It's not clear here You can go to Saipan to see the phoenix flash,Individuals have been using this。

Upgrading with the firmware in the Nokia PC suite will do the trick.

1. Soft lattice machine.

Enter the interface, enter the original password 12345. Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, the default is 12345, and select Confirm after entering.

2. Hard-grid machine.

Volume button + screen lock key + dial key (green key) + menu key, and finally press the hang-up button (red brush and key) to power on!

Flashing is not the same as the grid machine.,If you want to brush the machine, it's best to go to the forum to see the tutorial--- Phoenix Brush Network.。

Warning: Brush the machine with caution and be careful into bricks.

1. Factory reset Nokia mobile phones, there are "hard grid" and "soft grid".

Second, the so-called "soft grid", you can delete the installed program, but generally will not delete the address book, if you want to delete it, you can first "mark all" the contact card information, and then click "delete". Here's how to do a factory reset.

Soft Grid Step (Factory Reset):

1.Once you're sure that the information you want to save on your phone has been backed up, find :

Settings - mobile phone management - restore factory settings, you need to enter the lock code, if you have not modified the password, the general default lock code is 12345 (actually verified), if it doesn't work, you can try 123456,000000,0000 (some people say it's easy to use).

2.The phone will automatically restart. At this time, after turning on the phone, you will find that the interface of the mobile phone is also in the factory setting state.

3. Hard-grid steps:

1.Shutdown.

2.Press and hold the "red button", "green button", "camera button" and the power button on the front of the fuselage at the same time, press and hold for a few seconds, wait for the boot screen (handshake), and the word "formatting" will appear in a few seconds, and you will officially enter the formatting process, and wait for the process to end.

Dial key to press * is to restore factory settings, hard way is: after power off, press the green key + function key + unlock key + volume up key at the same time, and finally press the red key until the country is selected before you can let go!

* Yes factory reset, no clear C drive data! * It's a soft bar, which will clear the data of the C drive!

Soft grid due to the clear C disk data is not clean sometimes inexplicable problems, it is recommended to hard grid, hard grid method:

After powering off, press the green button + function key + unlock key + volume up button at the same time, and finally press the red button until the select country appears!