What should I do if my computer is smoking??? What to do if the computer is smoking

Burned. The smoke is obviously a burnt component and is very dim, which is a lamp problem. It is estimated that the built-in power supply part of the display may be broken. Let's send it for repair.

The power supply is unstable, and the excessive current has killed it -- there is a short circuit in the circuit, so take it and fix it. BenQ products should be guaranteed for 3 years, you check. If not, spend money to fix it.

Hey, your computer's display tube burned out, you go to the place where you bought the computer to see how to deal with it, although I understand, but I don't know the specifics, so you have this time to say here, it's better to go to the place where you bought the computer to see, and then people will say that you did it yourself, it's best to go early.

Could it be that the high-voltage wire pack is burned? Send it for repair!

It seems that the problem is more serious, if it is not out of insurance, report it.

If it is out of warranty, it is not recommended that you repair it yourself, unless you have some experience with electrical appliances.

There is high pressure inside, do not open it for non-professionals.

The monitor burned.

If you are under warranty, find a dealer for a new one.

If you don't change it, you can go to the industrial and commercial bureau to complain about him.

I found a lot! You see!

Have you noticed where the smoke is coming from your computer?

One is the motherboard, the other is the power supply, and only these two will smoke.

If the computer is burned, change it, it's not cost-effective to repair, if the motherboard is not burned to the north and south bridges, it can be repaired cheaply. Feel relieved.

However, this possibility is not that you can fix it, you still have to have it repaired by a professional at a computer repair shop. But now that you know that, you won't be fooled. Because you already know what's bad. Go ahead, I hope you can use your computer soon!

If it feels good to me,

Shut down - power off - after cooling safety open the chassis to check the damaged parts and the extent of damage - repair or replace the damaged hardware - power on - turn on the machine To put it bluntly, depending on the situation, repair either repair or replace with a new one There is no third way As for selling scrap products, it is not in the discussion.

I don't know if it's very damp inside, where is the smoke coming from the street, check and check, you can only repair it.

It is almost certain that the power supply is burned out, and it is not suitable for repair, so you should replace it with another one. Buy one with good stability, so as not to burn out the computer, oh. For example, Huntkey power supply is very good.

If there is no spark, it is not a short circuit.

The computer smokes a lot, probably because the air in your friend's house is too hot. Or it hasn't been opened for too long.

It's not that the circuit burned or something. If it's a computer, it won't work.

LZ advises your friends to do a good job of ventilation measures. In the future, the computer should be always on.

Be sure to turn on your computer for 3-5 hours after the rain.

Cut off the power supply first, and then send it to a professional for service.

What smokes? Console or monitor? In the case of the host, clean up the dust.

Unplug it right away and go for repairs.

If you change the power supply directly, the power supply will not be very expensive, and it will be done for about 50 yuan. The power supply voltage is unstable, and the motherboard burns out if you play again.

The motherboard is burned, and the computer is pulled with a new one, and it's not interesting to repair the motherboard.

Let's get a new one, personal safety matters.

Burn it, take it to the repair point for testing.

Take it and fix it, there is no choice.

If it's an old computer, you can't use it, so let's replace it with a new one.

I guess I won't be able to turn it on next time.,Is it the display that is rising?,Changed.,It's been on for too long.。

At best, it's probably a wire burn, and at worst, it's something important like a motherboard, so let's check it

Judging from your description, it is more likely that the power supply will burn.

The power supply is not expensive, 80-120 bar, ordinary brand.

Carry the case to the store.

Check it up.

Yours first turn off the power and check in.

No, there is a problem with the power supply, or the wiring is aging.

Changing the power supply is a must!

I didn't have a fire extinguisher ready.

Oh, that's awesome

The monitor is indeed going to be replaced, and it is estimated that if you don't change it, your computer will blow up next time

How much of the sports lottery should be collected in the provincial capital?

If the computer at home smokes for unknown reasons, you should avoid the front of the screen to avoid the screen from hurting people. Electrical appliances smoke is mostly burned out by the alternating current part, and accompanied by a short circuit, first of all, the power supply must be cut off, and non-professionals should not be repaired, so as to avoid electric shock.

Computer smoke failure analysis:

1. The power cord smokes, the power is off, and the damaged power cord is replaced.

2. The power supply of the host is smoking, the power is off, the power supply of the host is replaced, and the power supply with serious damage is generally not repaired.

3. The motherboard and graphics card are smoking, mostly the capacitor bursts and smokes, and the motherboard is repaired or replaced.

4. The display is smoking, and the display is repaired, and the power strip of the display is mostly damaged.

Extended Information: Computer Smoke **Measures:

1. Cut off the power supply by air.

The computer should be turned off in time and the power cord should be unplugged so that the fire can be extinguished.

2. Stay away from smoking computers.

When the computer is on fire, there is often a phenomenon of heating up in the components of the computer host, and the phenomenon of toxic gas, and the display screen and display tube may also occur, so we should wrap the computer with a wet towel or carpet after cutting off all the power supply, so as to prevent the smoke from overflowing, and the glass fragments of the fluorescent screen can also be blocked to prevent injury.

3. Don't make friends splash water.

Be sure not to splash water on a computer that is on fire, this is a very dangerous thing, even after unplugging the power cord, there may be some residual current in the computer, if splashed with water, it is easy to get electrocuted.

Computer smoke is usually caused by overheating, faulty circuits, or damaged components. Here are the specific reasons and how to fix them.

At this time, the graphics card and processor consume a lot of power and generate a lot of heat. When the cooling system is not able to dissipate heat effectively, the computer is prone to smoke.

Solution: You can reduce the temperature of your computer by cleaning the dust inside your computer and replacing the radiator. Using a cooling pad or fan can also effectively help dissipate heat.

2.Circuit failure: The computer's circuit board and power supply may malfunction, causing the computer to smoke.

Solution: If you find that the computer is faulty and there is an electric smoke from Minghe stove, it is recommended to turn off the power immediately and contact professional maintenance personnel for maintenance.

3.Hardware damage: Computer parts can be damaged, such as graphics cards or power supplies.

Solution: If the hardware of the computer is damaged and causes smoke, it is recommended to stop using it immediately and send the computer to a professional repair organization for overhaul or replacement parts.

To sum up, there may be many reasons for computer smoke, in order to avoid this situation, we should pay attention to the environment and way of using the computer, clean the computer regularly, and maintain and overhaul it in time. If the computer is smoking, you should turn off the power immediately and contact a professional service person for inspection and repair.

E-cigarettes. What's going on with the smoke of the electronic regulator is that the current of the electric welding machine is very large, and the breakdown of the battery line is shorted. Severe balance rotten bottle will **, very dangerous:

1. Some welding machines are designed to be connected to 220V and 380V, and different voltages have different terminals.

If the terminal of such a welding machine is used correctly, there is no big difference between different voltages and currents2. Connect to 380V for heating.

Smaller. It is best to connect 380V when noisy and swimmer with high current. If you use 380V to terminate the 220V current, the current will be much smaller, and if you use the 220V terminal to connect the 380V welder, it will smoke quickly;3. The use of AC welding machine in agricultural machinery maintenance is very common, and its structure is composed of a lifting transformer and a regulating and indicating device isolated from the primary winding and the secondary winding.

1. When the computer starts to smoke, immediately unplug the power plug or turn off the main power switch. Then cover the computer with a wet blanket or quilt, etc., so that the rock can not only stop the spread of fireworks, but also block the glass shards of the fluorescent screen.

2. Do not splash water on the computer that is on fire, even if Muyun has turned off the power of the computer. This is because a sudden drop in temperature can cause the red-hot CRT to burst. In addition, there is still residual current in the computer, and splashing water may cause electric shock.

3. Do not lift the covering**, when extinguishing the fire, in order to prevent the picture tube from hurting people, you can only approach the computer from the side or back.

This situation indicates that the computer has been overloaded, if the acorn can still open the machine normally, turn off the computer as soon as possible, and check what is burned inside. It is very likely that the electric source is broken, and it needs to be repaired by a professional.