17 years Harvard H62 0T maintenance lamp to zero

1. First of all, after pressing the car start switch, you can set the maintenance light to zero.

2. Next, observe the instrument display panel of the car, and there will be a maintenance prompt at this time.

3. Then click the set button on the steering wheel to enter the setting process.

4. Then click the SEL button on the right side of the steering wheel.

5. Then click the cancel button on the steering wheel.

6. In this way, the maintenance prompt on the dashboard will disappear, and the maintenance light will be set to zero.

Hello, for this model, you must use the decoder to clear the maintenance light, if there is no decoder, it can not be operated, if your car is not maintained, you can go to the maintenance first, if it has been maintained, you can wait until the next time you go to the repair shop to eliminate it with the decoder.

Generally, the maintenance light is zeroed, and after the maintenance is done in the 4S shop, the staff will eliminate it for you on the computer.

Only after maintenance, the maintenance fault lamp can also be eliminated. This is usually eliminated by connecting to a computer.

Close the key door with your left hand and hold the button in the lower right corner without letting go. Open the key door with your right hand, and a non-flashing wrench symbol will appear on the meter. Release your left hand, press the button in the lower left corner, and the wrench symbol disappears.

Hello, the maintenance of this car is zeroed, when your car is being maintained, the staff will use the computer to zero for you.

In this case, you can ask the staff of the 4S shop to help you clear it with professional instruments after the vehicle is maintained.

Hello, this is not a problem, of course, you don't have to control it yourself, the main thing is that the staff will use the computer to clear it for you when you are maintaining the car.

Hello, Haval H6 This car maintenance needs to be linked to the computer to set the reset.

Hello, the maintenance technician will give you free elimination during this maintenance, of course, it will not be eliminated and will not affect the use.

There are two ways to reset the Great Wall Haval H6 maintenance indicator light to zero:

First: Turn off the ignition and press the single meter reset button on the instrument cluster and keep it on. Turn on the ignition and the odometer display starts counting down.

When the display is displayed, release the button, and the wrench indicator on the display on the instrument cluster indicating maintenance operation should turn off.

The second way: go to the 4S store and use the detector to zero. The "Service" logo on the dashboard display is the service interval indication sign, when the ignition switch is in the ON position, the "Service" logo on the display flashes, and the logo disappears after starting the engine, indicating that the car should be serviced.

After maintenance, the maintenance lamp should be zeroed.

1. Step on the brake caster of the Harvard H6 in Laqiao, and prepare to start the engine of the Harvard H6 until you can't step on it.

2. Press the one-button start button of the Harvard H6 to start the engine of the Harvard H6.

3. The instrument light of Harvard H6 is on, which proves that the electronic system of Harvard H6 has been connected to the power supply.

Fourth, add coarse oil to the Harvard H6 and add it to the position of the scale mark.

5. Press the maintenance button of Harvard H6, and the maintenance lamp can be reset to zero.

【Pacific Automobile Network】16 years Great Wall Harvard H6 maintenance lamp zero steps: 1. Turn off the ignition switch. 2. Press the zeroing button of the single meter on the instrument cluster and keep it on.

3. Turn on the ignition. 4. The odometer display starts to count down. When the display is displayed, release the button, and the wrench indicator light indicating the maintenance operation in the display on the assembly instrument should be turned off.

The Haval H6 adopts a load-bearing body design, with a MacPherson independent suspension at the front and a double wishbone independent suspension at the rear. In terms of power, the new model will be equipped with a small-displacement, fuel-efficient, powerful gasoline and green static diesel series engine, which can be mated to a six-speed manual transmission and automatic transmission, as well as rear-wheel drive and timely all-wheel drive systems. In terms of power, the Haval H6 will be equipped with three engines: gasoline and green static diesel, among which the most popular is the newly developed turbocharged engine developed by Great Wall, which adopts an all-aluminum alloy cylinder block and is equipped with double overhead camshafts, VVT technology at the intake end and exhaust gas turbocharging technology.

Photo by Lin Hong, Pacific Automobile Network).

Tools required: laptop, trip computer software.

1. When the maintenance cycle expires, the oil replacement prompt light of the car dashboard will be lit, and the stool that needs to be flushed after car maintenance should be manually eliminated.

2. Connect the external control computer of the car to the on-board computer.

3. Select the engine option on the driving computer software.

4. After that, select the matching function and enter the function module.

5. After that, the number will be prompted, and the control module will accept the request and update the read data.

6. After that, the pop-up interface selects the maximum time value for maintenance. The pure judgment will modify the stored data into new data, so that the prompt will not continue after the maintenance cycle is modified.

7. After clicking OK to modify the new data, there will be no maintenance prompt.

Connect the external control computer of the car to the on-board computer, and select the "engine" option on the driving computer software. Select the "Match" function, enter the function module, and prompt "Control module to receive request" to update the read data. In the pop-up interface, select the maximum time value for maintenance, modify the stored data to new data, and click "OK".

Connect the car's external control computer to the on-board computer and select the "Engine" option on the trip computer software. Select the "Match" function to enter the function module, and prompt "Control Module Accept Request" to update the read data. In the pop-up page, select the maximum maintenance time value, modify the stored data to new data, and click OK.

Basic maintenance items: 1. Change oil and filter: improve oil quality, make the power smoother, and prolong the life of the engine; Improves the ability to filter out impurities and debris.

2. Fuel filter element: clear about the impurities and moisture of the fuel, so that the engine can give full play to the best performance.

3. Spark plug: to prevent ignition difficulties and insufficient power in the engine.

4. Brake fluid: absorb moisture in the air, improve braking performance, and ensure driving safety.

5. Brake pads: After driving for a long time, the brake pads will be seriously worn, and the braking effect will be reduced.

Photo by Pacific Automobile Network Q&A).

16-year-old Great Wall Harvard H6 maintenance lamp zeroing method: 1. Turn off the ignition.

2.Press and hold the zero button for a single meter on the instrument cluster. 3.

Turn on the ignition. 4.The odometer shows the start countdown.

When displayed on the display, release the button and the wrench indicator on the instrument cluster display indicating maintenance operations should turn off.

The Haval H6 is a brand of Great Wall Motors and was launched on August 25, 2011 at Great Wall Motor's new plant in Tianjin. The Haval H6 is positioned as an urban smart SUV with two drive modes, namely two-wheel drive and four-wheel drive. The car series is available in Mitsubishi gasoline-powered models and Lv Jing diesel models, and is divided into three versions: Urban, Elite and Qingwang Prestige.

As a new model of the Haval family, the Haval H6 has a variety of technologically advanced power combination schemes, and the configuration is more luxurious, fully meeting the needs of customers. The Haval H6 adopts a load-bearing replication design, with MacCopyForex independent suspension for the front suspension and double wishbone independent suspension for the rear suspension. In terms of power, the Haval H6 will be equipped with gasoline and Lv Jing diesel engines, among which the most popular is the newly developed turbocharged engine simple empty engine by Great Wall with all-aluminum alloy cylinders, and equipped with double overhead camshafts, VVT technology at the intake end and exhaust gas turbocharging technology.

Millions of car purchase subsidies.