The sink is the heart of a kitchen, how to choose a sink

It is recommended to buy a large single-tank basin.

Double slots: ** will be expensive, easy to install, easy to use, two slots can be classified and washed, a lot of worry; There are two sewers in the double tank, so the drainage management will be more complicated, so the chance of failure will be greater than that of the single tank. Generally, the double tank is composed of two small single tanks, so if you want to wash a large pot and basin, there may not be enough space.

To sum up, there is no very certain answer to choose a single slot or a double sink, all choices should be based on their own kitchen habits, if the countertop space is small, choose a large single sink, on the contrary, choose a double sink.

Based on my personal experience of many years of use, I chose it. Undercounter basin, single slot.

I now use the double groove at home, and I found that the right groove is chicken ribs.

Choose a 63 cm single slot, because then you can put your pot in it and you won't take up a lot of space.

Kitchen sink, which should I choose? Use a single sink for a small kitchen area and a double sink for a large area.

<><How should you choose a kitchen sink?

In the past, when the kitchen was renovated to make a sink, most people chose to make a double sink because the planning was particularly ideal: a sink to wash pots and pans, a sink to wash vegetables and fruits, clear partitioning, clean and hygienic.

But when you actually use it, it's not like that. Either the big sink is not enough to put down a pot, and the illusion of beauty is shattered. Either you mix it with it, and the sink for washing vegetables and fruits is also used to wash the dishes. So it was complained about by many people"It's not practical, it's comparable to chicken ribs!

Regardless of single slot or double slot, it has its own use value, if you feel that double slot is very chicken ribs, it is very likely that you did not choose well!

First, the size should be selected well.

Everyone knows that there are single and double sinks, but do you really know their scale?

The size of a single slot is generally 450-150mm, for a small apartment, it is enough to install a single slot, because if your kitchen area is effective and you want to use a double slot, it will lead to two slots are not practical, because you can't put a pot at all, and you can't brush it. It is better to use a slot for multiple purposes, and the use value can be fully utilized.

The size of the double tank is generally more than 100mm, and it is no problem for two people to cook at the same time, but it is necessary to ensure that the countertop area is enough, otherwise it is really chicken ribs!

Second, the material should be paid attention to.

The materials of the sink are stainless steel, stone, ceramics, etc., and stainless steel and stone are used more at present. Stainless steel is widely used because it is more cost-effective. In recent years, the more quartz stone materials have been used, both in terms of cleaning and aesthetics.

If you prefer stainless steel, be sure to look for SUS304 because it is food safe and the quality is guaranteed. It is highly resistant to oil stains and is easy to clean and corrosion-resistant.

Third, try to install the faucet.

An ordinary faucet can meet normal use, but it is not very convenient when cleaning the sink. It is more convenient to install a pull-out faucet that can be taken down when cleaning the sink.

But don't be greedy for cheap and buy a low-cost pull-out faucet, save maintenance costs and buy a *** isn't it fragrant?

Fourth, the surface drawing process.

If you choose a stainless steel sink, then you should pay attention to the treatment process of the surface of the stainless steel sink is brushed, frosted, embossed, etc., and it is best to choose the brushed treatment process, because it is more wear-resistant, beautiful and easy to take care of.

In short, the choice of sink should be reasonably chosen according to your own situation.

The sink is a utensil in the kitchen, mainly used to wash vegetables, hold water, etc., although the volume is not large but the role can not be ignored, we need to consider many aspects when choosing a sink, let's learn about the kitchen sink selection skills together.

Kitchen sink selection tips.

1. Classification of stainless steel sink material.

Material: Stainless steel Material: Stainless steel Material: Stainless steel.

The difference between the above types of stainless steel materials is the difference in corrosion resistance, 304 is the best, 202 is slightly worse, 201 is second, of course, the difference in posture is also huge. Therefore, consumers are advised to consult the merchant clearly when purchasing and be careful of being deceived. It is best to have the manufacturer's warranty.

Note that usually the SUS304 sinks are up to standard.

Kitchen sink selection tips.

Second, the classification of surface treatment.

1. Pearl silver surface, 2. Frosted and brushed surface, 3. Mercerized surface, 4. Polished mirror surface.

The above four processes have their own special points, among which the pearl silver surface is the most popular, the process is to use sandblasting on the surface first, and then chemical surface treatment, the surface is luxurious, long-lasting. Mercerized surfaces have become increasingly popular, characterized by the combination of the advantages of frosted wire drawing process and polished mirror surface, the performance is delicate, mercerized like satin.

Kitchen sink selection tips.

3. Structural classification.

According to the size of the kitchen countertop, it is decided to choose a single slot to occupy a relatively small size, saving space in the kitchen. If the size of the kitchen countertop is large, whether it is a double sink or a single sink, it will not have any effect, and if you choose a double sink, the size is much larger than a single sink, but it is also very convenient to use. According to the use habits, if you like to put the big pot and basin into the sink for cleaning, but the cabinet at home is small, and there are not many places to place the sink, you can directly choose a single sink with a larger trace; If you are accustomed to using a sink to clean vegetables or bowls, choose a double tank, and if you choose a single tank, it is more wasteful of water and not environmentally friendly.

One of the biggest differences between the two is that half of the double sink can be used to clean greasy things, generally used to clean vegetables, but the area of the sink is relatively small; A single tank is a large area, and it will not easily spill water on the countertop. Kitchen sink single sink double sink advantages and disadvantages of single sink ** cheap, in the same installation space, single sink can get more use space. That is to say, with the same large hole in the countertop, the use of space for a single tank basin is larger than that of a double tank.

In addition, there is only one sewer in a single tank, and the sewer line is simpler than that in a double tank.

Kitchen sink selection tips.

Fourth, the water removal device.

The water device may be a thing that is ignored by most consumers, but it is a very critical component in the configuration of the sink, and the impact on the sink is also very large, a good stainless steel drainer is more than 100 yuan, and there are drainers with automatic draining devices, but it is not necessarily a good thing to have more functions, it is convenient to start, and there may be problems for a long time!

Sink is a very important kitchen sanitary ware, washing vegetables and dishes are inseparable from the sink, it is very important to choose a good sink, then, what aspects to pay attention to when choosing a kitchen sink, many consumers only pay attention to the appearance when choosing a sink, but ignore its practicality, what material sink should be chosen, it is used for a long time in life, and the following is an introduction to what aspects of kitchen sink selection to pay attention to.

What aspects to pay attention to when choosing a kitchen sink.

First, what aspects should be paid attention to in the selection of kitchen sinks - functional selection.

A large single tank is enough as long as there is a faucet, a soap dispenser, and a draining basket, while a small single trough can only have a faucet and a soap dispenser. For example, the knife holder and props are stuffy inside, which is unhygienic and difficult to clean; The cutting board shelf, too close to the sink, easy to splash water, unhygienic, and messy.

Second, what aspects should be paid attention to in the selection of kitchen sinks - process selection.

There is a risk of open welding in manual sinks, and the straight edge increases the difficulty of cleaning, as mentioned above.

3. What aspects should be paid attention to in the selection of kitchen sinks - material selection.

The wear resistance of ceramics is not as good as that of stainless steel, and it is easy to scratch after a long time. Other stone sinks also have similar problems such as oil resistance and water resistance, but if you want to be individual, of course, talk about the style.

Fourth, what aspects should be paid attention to in the selection of kitchen sinks - modeling choice.

The double tank increases the cleaning workload, and the complex sewerage increases the maintenance risk. I also refer to the foreign **, more than 90% of the large kitchens use a single slot, and the small kitchen does not see a double slot. And it's not big. This may have something to do with the fact that people have dishwashers.

Fifth, what aspects to pay attention to in the selection of kitchen sinks - size selection.

If the large single slot is sufficient, the inner warp is 70cm long and 32cm wide; The kitchen countertop is short, and you can choose a small single slot with an inner diameter of 50cm and a width of 32cm. Be deeper, splash less.

Sixth, what aspects to pay attention to in the selection of kitchen sinks - the location of accessories.

The large single-groove faucet is in the middle position, the draining basket is on the right side of the faucet, which cannot block the faucet, and the soap dispenser is placed in the upper left corner, which is easy to use; The small single-sink faucet and the soap dispenser are on two corners, the upper right corner is the faucet, and the upper left corner is the soap dispenser.

7. What aspects should be paid attention to in the selection of kitchen sinks - the selection of accessories.

The faucet should be made of a high throwing line, and washing the pot is not in the way; soap dispenser, the bigger the better, 500ml on TB; Draining basket, about two-fifths of the total length of the sink, the simpler the shape, the better the rectangular type, flat bottom, because the drainage basket area is limited, flat bottoms can borrow space from each other, concave and convex what bowl rack plate rack, reduce the filial piety cavity less use area, increase the workload, wash the tableware are all buckled inside the drain to put away, do not have to waste time and effort here.

Generally, the kitchen is a stainless steel sink, and the following points can be paid attention to when choosing a stainless steel sink:

1. Stainless steel material classification 304 is the abbreviation of SUS304.

304DDQ stainless steel is a special process that increases the chromium content of 304 stainless steel by 2 points. 304 is the best, 202 is slightly worse, 201 is second, and of course, the difference is also huge.

2. The thickness of the stainless steel sink plate.

The optimal thickness of the sink plate is between -1mm, and the thicker the steel plate, the higher the requirements for casting equipment and processing technology. But it's not good if it's too thick, and it affects the load-bearing of kitchen cabinets.

3. The surface treatment of stainless steel sink has different treatment methods such as pearl surface, frosted surface, brushed surface, embossed surface, mirror surface, etc.

The number of pearls accounts for 9 percent, but they are not scratch-resistant like mirrors. Frosted and brushed surfaces have higher technical requirements.

4. The stainless steel sink process has welding method and integrated molding method.

We see some brand-name sinks, the same appearance size, but ** very different. There are material factors in this, as well as the cost of the process. The one-piece molded ** is higher.

5. Stainless steel sink fittings.

The quality of the drain and the sewer pipe directly affects the use and life of the sink. In addition, it is important to have a table-controlled water removal function, which can not only solve the inconvenience of picking up and releasing water when washing when you need to remove water, but also solve the pain of putting your hands into the oily sewage and the ice water in winter.

1. Stainless steel should be selected, that is, rust-proof, 2. The thickness of the material should be guaranteed, that is, the strength should be guaranteed, 3. There should be a sound-absorbing coating on the back, and the water noise will not be too large when used.

5. The sewer pipe material should be selected as engineering plastics, not recycled plastics.

Choose a stainless steel sink. The quality of choosing a brand is more guaranteed. I bought a bachelor's brand sink at home, saying that there is no handprint treatment in Germany, it is not easy to absorb oil, it is good to clean, so I bought one back, and it has been used for almost 1 month now.

Not so much exquisite, cement, ceramic, stainless steel, I have used, in fact, it is better to say that the ceramic is better, easier to clean than stainless steel, ** is also cheaper, simply click a groove, two grooves are not practical, in fact, you can't use another groove.