How to connect the wireless network of the 360 router

1. Installation and connection of the router.

First connect the power adapter to the 360 secure router P1, and then plug the external modem or external network cable into the "WLAN port", and the other ports are connected to the computer.

360 Secure Router P1 is installed and connected.

2. 360 Secure Router P1 Setup Tutorial.

1、Here we take the win7 notebook to set up 360 security router P1 as an example,Earlier, we plugged the external network cable into the router WAN port,And after turning on the router function,The nearby notebook can search for a wireless signal called [360WiFi-**,We can directly use the wireless function of the notebook to connect to this wireless network,As shown in the figure below。

2. After the wireless connection is successful, then we open the browser, and then type the default address address of the 360 security road P1 in the address bar:, and you will see a welcome interface for the initial setting, here you can directly click [Open Now], as shown in the figure below.

3. The next step is to start the Internet setting, here is mainly to choose the Internet mode, mainly: PPPoE, dynamic IP, static IP, generally most of the home users are pulling broadband, belonging to PPPoE dial-up Internet access, so when setting here, you should select [PPPoe], and then fill in the broadband and password provided by the network provider below, after filling in, click [Open Internet Now] at the bottom, as shown in the figure below.

ps.If you don't know how you use the Internet or your broadband password, check with your broadband operator.

4. Next, you will enter the wifi wireless setting, here you can set the wifi name and password, the wifi name can be set at will, but the wifi password, please try not to set it too simple, to prevent other users from rubbing the network, it is recommended that the password length is more than 8 digits, using a combination of letters + numbers, after the setting is completed, click [Next], as shown in the figure below.

Note: The wifi password set is also the login password for 360 security road P1 management in the future, so the password should be set to ensure that it is as complex as possible, but it is also not easy to forget.

Through a simple four-step setup, we can complete the setup of 360 secure router P1, as a smart router, the setup is simpler than ordinary routers.

After the wireless router is connected to the wired router, enter the wireless router management page

Step 1: Unplug the network cable of the WAN port of the second router and connect the computer to the LAN port of the second router.

Step 2: Computer enters the router

1. Check the IP first, method: win+r--- enter: cmd--- enter in the black and white interface: ipconfig, press enter.

4. Pop up the router login interface and enter the default login username of the router: admin and password: admin (if it is incorrect, look at the back of the router).

360 security router has the characteristics of all-round anti-blacking, high-speed dual-band 1200m, intelligent connection, Seiko building, high cost performance, etc., so do you know how to connect 360 routers? Here are some relevant information about the 360 router connection that I have compiled for your reference.

How to connect the 360 router:

360 router.

1. Broadband is the first line access:

Please prepare 2 short network cables, and connect the WAN port of the 360 router to the broadband modem with network cables.

adsl modem )。The computer is connected to any of the 360 router interfaces with a network cable, and the connection method is shown in the following figure

Broadband is the correct way to connect the 360 router when the ** line is accessed.

2. When broadband is optical fiber access:

Prepare 2 network cables, and connect the WAN port of the 360 router to the modem with network cables.

The computer is connected to any of the 360 router interfaces with a network cable, and the connection method is shown in the following figure

Broadband is the correct connection method for 360 routers when optical fiber access.

3. Broadband is when the home network cable is accessed

Connect the home network cable provided by the carrier to the WAN port of the 360 router. The computer is connected to any of the 360 router interfaces with a network cable, and the connection method is shown in the following figure

Broadband is the correct connection method for the 360 router when the home network cable is accessed.

1) Connect the 360 wireless router in the above way.

When the router completes the Internet settings, the computer can automatically access the Internet, and there is no longer a need to use the "broadband connection" on the computer to dial up the Internet.

Finish. (2) When setting up the router, it is not necessary for the computer to have a network, as long as the LAN port of the computer and the router is connected with a network cable, you can set it up; Many novice users think that they must have an Internet connection in order to set up a router, which is wrong.

Once the wifi is plugged into the computer, it will be connected automatically, and we only need to set a username and password to use it.

Step 2: After entering the official website page, click on the Pocket WiFi option.

Step 3: After entering the pocket wifi page, click the install driver button on the right side.

Step 6: In the pop-up installation window, check the agreement and click the Get Started button to wait for the installation to complete.

Step 7: Plug the 360WiFi into the jack of the computer.

Step 8, after plugging 360wifi into the computer, it will be automatically connected, we only need to set the username and password to use.

There are four main steps:

1. Connect to the 360 router;

2. Set the IP address of the computer;

3. Set up a 360 router to access the Internet;

4. Check whether the setting is successful.

Let's take win7 as an example to connect to the router.

1. This name is the default SSID of the router, and there is a label on the back of the router, which can be artificially modified. In the past, when using a router, you had to open the browser as soon as you connected and type: to log in to the router.

I guess this has become a habit, right? However, after the computer connects to P1 and opens the browser, it jumps directly to the routing login page! The official website of 360 Routing also links to the routing login page, which is probably part of the "intelligence"!

Looking at the figure above, it is not difficult to find that the management address of P1 is. Click "Open Now" to start managing P1.

The router automatically detects the Internet access mode: PPPoE, dynamic IP, and static IP. Mine is pppoe, after entering my broadband username and password, click to start surfing the Internet immediately, and you can access the Internet (this is no different from a normal router).

Next, you can set up the wifi, customize the duck ode name and password to select the next step.

You can now access the Internet via WiFi connection P1. Let's take a look at the router's web management page! The design is still very much in line with the trend of flattening.

Enter the browser to enter the login page, since the wifi password and login password are the same, enter the wifi password.

Note: (1) ADSL modem (cat), fiber optic modem and home network cable are the three ways of domestic broadband access, and you can choose one according to your own access mode.

2) After connecting the 360 security router in the above way, the computer can not access the Internet temporarily, when the router completes the Internet setting, the computer can automatically access the Internet, and there is no longer a need to use the "broadband connection" on the computer to dial up the Internet.

3) Please make sure to connect the computer-router; The network cable of the router-modem (optical modem) can be used normally; If there is a problem with the network cable, you may not be able to log in to the settings screen of the 360 security router, or you may not be able to access the Internet after setting it.

When you activate broadband, the carrier will provide you with a static IP address, subnet mask, default gateway, and DNS information. When the router is not in use, you need to fill in the static IP address information provided by the broadband operator in the local connection (Ethernet) of the computer, and then the computer can access the Internet.

Then when setting up a 360 security router to surf the Internet, you should choose: static IP Internet access - > and then fill in the IP address, subnet mask, default gateway, and DNS provided by the broadband operator.

There are currently several models of 360 wireless routers, and the common way to enter the management page is to enter the IP in the browser, enter ** or use the home network management of the 360 security guard. The following is an example of a 360 P1 wireless router:

Tools required: 360 wireless router P1, win7 operating system computer.

1. Find the 360 wireless router in the WLAN wireless wifi hotspot set by the network in the lower right corner of the computer, and the default SSID is generally in the form of characters behind the 360WiFi.

2. The computer connects to P1 and jumps directly to the routing login page after opening the browser. The management address of P1 is. You don't need a password when you use it for the first time, click "Open Now" to start managing P1.

3. After the setting is completed, you can use the IP address to log in, and the login password is the same as the wifi hotspot password set.

How to set up 360 router wifiWhat is Internet access? 360 is not only a security guard, but also produced a 360 router, but also a smart security router, which allows us to surf the Internet in a safe environment, the following is how to set up Internet access related information for you 360 router wifi, welcome to read!

Connect the router's cables. Then enter [Enter the router's setup wizard] in the address bar of your browser. As shown in the figure below, the Internet access is automatically detected.

Note: This router has a WAN interface. The color of the interface is green and it is marked with WAN. Don't make the wrong one. The other two interfaces of the same color are LANs.

Place the mouse over the selection of other Internet access methods to go to the way this router can access the Internet. Broadband Internet access is generally used. My online environment is a fixed IP, so the choice is to use a static IP to surf the Internet.

A message will indicate that you are connecting to the Internet. After the connection is successful, it will automatically jump to the interface of setting up wifi.

You can set a wifi name and password. Click Next.

Note: There is an administrative password below that also sets this password as the router. If you tick the administrator password of the router, it is the same as the wifi password.

After setting up the wifi, the router will automatically restart after 15 seconds.

After the reboot is successful, you will be prompted to set up the router successfully. Click Go to Manage Page to have a look

The above is how to use the configuration for the first time with the 360 router.