Why can t I connect to my newly bought wireless router?

The previous adsl link can be completely thrown away, the settings of the router are, enter and then set up the connection he will ask you for the username and password of the adsl, you enter it, click the link, and the router will let the cat automatically dial up.

The menu on the left side of the router is where you enable the wireless function.

If you connect to a router, you can't use a dial-up broadband connection. Turn on the computer and go directly to the Internet.

Just follow the instructions and fill in the broadband and password in the routing settings.

If you install the router, you don't need to dial in your machine, because the route comes with a dialing function, and what you need is to enter your Internet account and password in the routing settings. And remember to choose WPA encryption, now the Internet is very fierce.

It's easier to learn by looking at pictures:

Similar.

Is it multiple computers? There is no need for a broadband connection, select the connection option in the right-click attribute of the IE browser, select the connection and choose never to dial up, OK, as for the IP address set by the local area network, all the options are automatically obtained.

What a speechless! I can't communicate! If you connect the router, you don't need a "broadband connection"!

The main reason why routing technology was not widely used at the beginning of its advent was that the network structure before the 80s was very simple, and the routing technology was almost useless. Large-scale Internet networks have gradually become popular, providing a good foundation and platform for the development of routing technology.

Next, let's take a look at the network device setup tutorial.

In most cases, this problem is caused by the collision between the IP of the newly purchased router and the IP of the previous level. For example, if there are two people with the same name, and the names conflict, there will be problems when using them.

Well, let's take a look at how to fix it!

First, connect your router to your computer with a network cable. Note that the router's connection is yellow. interface (not a blue WAN interface).

In the pop-up window, enter the username admin and the password. (Basically, most manufacturers default to such usernames and passwords.) )

Finally, in the management interface of the router: Network Parameters -LAN Settings:

That is, the original change of the tung pants to.

After modifying, save, connect the network cable of the external network to the WAN port of the router, restart the router, and it's OK.

The new router cannot be connected to the wifi, which may be caused by a variety of reasons. Let's analyze them one by one.

First of all, it may be that the WiFi secret code is entered incorrectly or the WiFi name (SSID) is incorrect, resulting in the inability to connect to the WiFi. At this point, we need to check if the wifi password and wifi name are entered correctly, or try to change to other available wifi connections.

Secondly, it may be caused by incorrect router settings. We need to make sure that the router's wireless network is set up correctly, such as SSID, encryption method, password and other information must be consistent with the connected device. At the same time, we need to check whether the DHCP setting of the router is enabled, and whether the IP address and DNS of the correct ruler are assigned.

Thirdly, there could be a connectivity issue between the router and the ISP. We need to check whether the router is connected normally, such as whether the dial-up is successful, whether the IP address is obtained normally, etc.

Finally, it may be that there is a firmware or software issue with the router that prevents you from connecting to WiFi. We need to check if the firmware version of the router needs to be updated, or try restarting the router to see if that solves the problem.

In general, the new router cannot connect to the Internet when connected to WiFi, and it needs to be troubled from the above aspects. If none of the above methods can solve the problem, it is recommended to contact the network service provider or router manufacturer for help.

There may be the following reasons for this phenomenon:

1. The router is connected incorrectly, and the correct connection method for installing a wireless router should be shown in the following figure

2. The network parameters of the wireless router are set incorrectly, and the central office equipment of the ISP operator cannot be dialed and the Internet cannot be accessed.

3. The broadband line is faulty, and the router cannot dial the central office equipment of the ISP operator, and cannot be connected;

4. The broadband DNS server cannot provide domain name resolution services for some reason, and its external phenomenon is very similar to the inability to access the Internet, which is easy to be confused as a network failure;

5. The broadband is cut off by the ISP operator due to the expiration of the tariff, and you need to go to the business hall to pay for the renewal of the contract;

6. The router has enabled timed dialing, and the current time is not within the time period of automatic dialing;

7. The power of the modem is turned off, and the router cannot dial the network;

8. The network cable connecting the modem and the wireless router is faulty, such as being bitten by rats or flattened by furniture or the crystal head is not in good contact, resulting in the router being unable to connect to the network.

You look at the address behind your router or the account password admin or guest enter the routing page, set your broadband account password into the router and enable the wireless function!! The router comes with a manual, you take a closer look and follow the prompts to set it up.

Do you have wireless on? Let's go up and set it up.