How to make your own ipad touch screen pen, how to make your own tablet touch screen pen

Here's how to make your own tablet touch screen pen:1. Tools Raw Materials:

Tape, scissors, foil, cotton swabs, ballpoint pens.

Second, the specific steps:

1. Prepare the materials.

2. Take out the refill of the ballpoint pen, leaving only the pen holder for later use.

3. Cut off the cotton part of the cotton swab head.

4. Stuff the cotton swab head into the pen head, leave the cotton swab head outside, and tighten the pen head.

5. Wrap the tin foil on the nib, tighten the foil tightly, and keep the nib flat.

6. Fix it with tape so that the pen tip does not shake.

7. Wrap the pen barrel tightly with aluminum foil.

8. Wrap the joint with tape. The homemade touch pen is made.

The steps to make your own touch pen are as follows:

1. First of all, you need an idle pen, a piece of tin foil in the cigarette box, a knife, adhesive tape, a large cotton swab, and a piece of aluminum foil or tin foil for the oven.

2. Try to insert the cotton swab into the hole at the tip of the pen, if the hole is too small, you can use a knife to cut off a small piece to expand the scope of the hole.

3. Insert the cotton swab into the hole of the pen tip and press it firmly. Wrap the aluminum foil around the barrel and wrap it gently, not too hard, because the aluminum foil is easy to break, and you can gently pinch it to make it tighter after wrapping. The swab head should be exposed.

4. Wrap the wrapped pen barrel with adhesive tape to fix the aluminum foil, wrap the tin foil in the cigarette box on the cotton swab head, and try to make the pen head smoother. Wrap the wrapped cigarette box with tin foil to complete the production.

Here's how to make your own touch screen pen:1. Prepare materials in advance: tape, scissors, aluminum foil, cotton swabs, tin foil, ballpoint pens.

2. Take out the refill of the ballpoint pen, leaving only the pen holder for later use.

3. Cut off the cotton swab head with the cotton part.

4. Stuff the cotton swab head into the pen head, leave the cotton swab head outside, and tighten the pen head.

5. Wrap the tin foil on the nib, tighten the foil tightly, and keep the nib flat.

6. Fix it with tape.

7. Wrap the pen barrel tightly with aluminum foil.

8. Wrap the joint with tape. The homemade touch pen is made.

Take out the refill of the ballpoint pen, cut off one end of a cotton swab and insert it into the pen, tear off a small piece of tin foil, wrap the nib, wrap the pen body with a large tin foil, and fix it with tape.

The first step is to dip the cotton swab into the contact surface with the mobile phone.

The second step is to fold a piece of plastic wrap in half and then fold it in half.

The third step is to wrap the center of this four-layer plastic wrap around the end of the cotton swab dipped in water.

Fourth, tear a long strip of plastic wrap and start to wrap a layer on the cotton swab, the point is to be sure to tighten the plastic wrap on the cotton swab.

The fifth step is to flatten the end of the dipping water that has been wrapped in plastic wrap.

Advantages of touch screen pens:

1. The design is exquisite, comfortable to use, easy to carry, and equipped with a simple and fashionable lanyard, which can tie the stylus to the mobile phone for easy use at any time.

2. Especially when winter comes, if you are in a cold outdoor place, it may be very inconvenient to use a capacitive screen mobile phone with thick gloves, with a capacitive stylus, these problems will be solved, and you can control it like a finger touching the mobile phone screen.

Here's how to make your own tablet touch screen pen:1. Tools Raw Materials:

Tape, scissors, aluminum foil, cotton swabs, bead pens.

Second, the specific steps:

1. Prepare the materials.

2. Take out the refill of the ballpoint pen, and leave only the pen holder for later use.

3. Cut off the cotton part of the cotton swab head.

4. Stuff the cotton swab head into the pen head, leave the cotton swab head outside, and tighten the pen head. Tell the right file.

5. Wrap the tin foil on the nib, tighten the foil tightly, and keep the nib flat.

6. Fix it with tape so that the pen tip does not shake.

7. Wrap the pen barrel tightly with aluminum foil.

8. Wrap the joint with tape. The homemade touch pen is made.

Here's how to use the touch pen for tablets:Tools: Device (huaweimatepad), System (.

1. Turn on the Bluetooth of the tablet and align the groove of the stylus to the top of the tablet.

2. The tablet will pop up a pairing prompt box, click [Connect] to pair and use.

Precautions for the use of tablet touch screen pens:1. Don't use too much force in the process of use, it is easy to damage the screen of the tablet.

2. When using the touch screen pen, you should actively try to convert the corresponding parameter settings.

3. The touch screen pen may fail in some special circumstances, so it should be used in the right scene.

Summary. The Apple Pencil is Apple's smart touch capacitive pen that, in my opinion, is also arguably the best accessory for the iPad. If you want to use your iPad to draw and write, then Pencil is definitely a must-buy.

Up to now, Apple Pencil has released two generations of products, and the specific performance of the two generations of products is the same in most scenarios, except for the support model of the tablet, charging method, pairing method, and the unique double-click switch of the second generation.

How to use the touchscreen pen on Apple tablets.

Apple's stylus is used as follows: 1. First turn on the Bluetooth function of the iPad. 2. Then unplug the cap on the back end of the capacitive pen and plug it into the Lightning port of the iPad.

3. At this time, a pairing prompt window will appear on the iPad screen, click the "Pairing" button. 4. After pairing, touch the screen with a pen.

The Apple Pencil is Apple's smart touch capacitive pen that, in my opinion, is also arguably the best accessory for the iPad. If you want to use your iPad to draw and write, then Pencil is definitely a must-buy. Up to now, Apple Pencil has released two generations of products, and the specific performance of the two generations of products is the same in most scenarios, except for the support model of the tablet, charging method, pairing method, and the unique double-click switch of the second generation.

Hello dear. I hope mine can help you, if you have any other questions about the stylus you can also ask me after that, I've always been there. <>

The iPad stylus needs to be set up before it can be used, and the steps are as follows:

Tool: ipad2.

Operating system: iOS.

Set up. 1. The first step is to open the main interface of the iPad, and then click to enter the "Settings" option, as shown in the figure below.

2. In the settings interface, click to enter the "Keyboard" option, as shown in the figure below.

3. In the keyboard interface, find and click the "Add New Keyboard" option, as shown in the figure below.

4. In the Add New Keyboard interface, select and click the "Chinese (Simplified)" option, as shown in the figure below.

5. Then in the pop-up menu bar, select and click on the "Handwriting" keyboard, and then click on the "Done" option on the top right.

6. Finally, the handwriting keyboard is added, when using the input method, click the "Earth" sign in the lower left corner of the keyboard, and you can switch to handwriting input.

The role of the iPad stylus: to refine the operating experience.

A stylus is not a panacea, and neither is multi-touch. Although the latter is very mature, it still focuses on sliding, large-area touch, multi-point zoom and other forms of operation, after all, the size of human fingers cannot be changed.

The advantage of the stylus lies in the precise operation, which has advantages in painting, fast writing, handwriting restoration, etc. Many users also need a stylus to perform professional drawing and other operations, which is why fingers cannot replace a stylus.

The method of making a tablet touch screen douzhen pen is as follows:

1. Tools Raw Materials:

Tape, scissors, foil, cotton swabs, ballpoint pens.

Second, the specific steps:

1. Prepare the materials.

2. Take out the refill of the ballpoint pen, leaving only the pen holder for later use.

3. Cut off the cotton part of the cotton swab head.

4. Stuff the cotton swab head into the pen head, leave the cotton swab head outside, and tighten the pen head.

5. Wrap the tin foil on the nib, tighten the foil tightly, and keep the nib flat.

6. Fix it with tape so that the pen tip does not shake.

7. Wrap the pen barrel tightly with aluminum foil.

8. Wrap the joint with tape. The homemade touch pen is made to complete the air barricade.