Is the car glass film on the inside or outside?

The car film is to be pasted on the inside of the car glass, the reason is very simple, and then there will be no wind and rain on the inside, and the film will not be subject to too much external interference during the use of the film, because the film is glued, without the baptism of wind and rain, it must be very firmly pasted, and it will not be affected on the inside when used. Since the film is attached to the inside of the car glass, the wiper will definitely not scratch the glass film, because the wiper is on the outside, and there is no need to remove the car glass when pasting the car film. Car film is actually a very technical work, much more difficult than architectural film, because the car glass has a curvature, and the architectural glass has a curvature is not much, after a film is cut, it is necessary to bake and shape according to the curvature of the glass, and then accurately cut the film, and then the film is applied internally.

When you use windshield wipers or encounter wind and sand weather, it will scratch the car film, and the wind and rain, sand and gravel invasion will also cause damage to the window film itself. If the car film is attached to the glass, it can avoid the damage caused by the external environment in the first place. In addition, in the unlikely event that the car glass is broken, the film will stick to the glass fragments to prevent the driver and passengers from being injured by the broken glass fragments.

Car wrap is attached to the inside of the glass. In order to avoid damage to the film from the external environment.

An important function of the automotive glass film is explosion-proof, when the glass self-explosion or external force impact burst, the glass film can stick to the glass fragments, avoid secondary injury to passengers, and improve safety.

If it is attached to the outside of the glass, when using the wipers, the film and wipers will cause scratches, and rain or wind and sand will continue to invade the film, affecting the effect of the film.

The car film is to be attached to the inside of the car glass, because it is pasted inside.

The side will not be exposed to wind and rain, and the aging will be slower, so as to prolong the service life; At the same time, the film will not be subject to too much external interference during the use of the film, will not be damaged by hanging, will not experience wind and rain, the adhesive will be more firm, and there will be no corners and other conditions.

There are 7 benefits of car glass film:

1. Heat insulation and sun protection. The film is a good barrier to a large amount of heat generated by infrared rays.

2. Ultraviolet insulation. The medium and long waves of ultraviolet rays can penetrate very thick glass, and most of the ultraviolet rays can be blocked by applying a heat insulation film. Preventing ** injuries can also reduce the aging of car interiors.

3. Safety and explosion-proof. The base layer of the film is polyester film, which has the function of being very tear-resistant and anti-breakdown, and the adhesive layer of the film can prevent the glass from accidentally breaking the glass and causing damage to the driver and passengers.

4. Create a private space. After choosing the right variety and applying the film, it is usually difficult to see the inside of the car from the outside of the car, while the outside of the car can be seen clearly from the inside of the car, retaining privacy and security.

5. Reduce air conditioning and save consumption. The loss of refrigeration capacity of the air conditioner can be compensated for by attaching a heat insulation film, which can instantly reduce the temperature in the car and achieve a certain degree of fuel saving.

6. Increase aesthetics. According to personal preference, the car can be personalized and beautiful through the film.

7. Anti-glare. Reduce accidents caused by glare.

The car wrap is attached to the inside! We're just baking the film outside, and we don't need to remove the glass at all! After we bake the film on the outside, we only need to align it on the inside and stick it on the edges

Inside, some special films can also be attached to the outside.

Car wraps are attached to the inside of the glass. Wipers won't scratch the car wrap. There is no need to remove the window glass when installing car wrap.

Car film is a film that is applied to the front and rear windshields, side windows and sunroofs of vehicles to provide a film-like object for safety and heat insulation. Its function is mainly to block ultraviolet rays, block part of the heat and prevent the sudden burst of glass caused by injuries and other situations, and at the same time, according to the one-way perspective performance of the solar film, to achieve the purpose of protecting personal privacy. It can also reduce damage caused by UV exposure to items and people in the vehicle, saving fuel consumption on some levels.

At the same time, it increases the aesthetics of the vehicle.

Automobile explosion-proof film structure:

1. Anti-wear layer: composed of wear-resistant polyurethane, with a hardness of up to 4h.

2. Colored PET safety base: made by melting and extruding high-strength, high-transparency PET polyester and pigment bidirectional stretching, because the pigment is sandwiched in the PET film, it can prevent oxidation and discoloration, and the service life is up to 8 years.

3. Metal thermal insulation layer: nano-level metal layer with high reflectivity to infrared rays such as aluminum, silver, nickel and other metals by vacuum evaporation or vacuum magnetron sputtering on PET film;

4. Composite adhesive: composed of polyurethane adhesive with good weather resistance and high transparency;

5. UV absorber layer: composed of special UV absorber, which can block 99% of ultraviolet rays;

6. Transparent PET safety base: It is composed of high-strength and high-transparency PET polyester film, the purpose of which is to sandwich the metal layer in the middle, prevent metal oxidation, and prolong the life of the metal film;

7. Installation adhesive: composed of acrylic adhesive with good weather resistance and high transparency;

8. High transparency PET release film.

Stick it outside, I haven't heard of it being posted inside, and it's sticking it outside to play a role, it's windy and rainy, and it can also block the sun.

Of course not, the car film is pasted inside, which not only has a good heat release effect, but also has a long life, so your wipers are specialized.

No, it will not be affected. In addition, when the film is pasted, it needs to be completed by professional construction personnel, and there is no need to remove the glass, as long as the window is not opened or closed within two or three days after the film is completed. If you come to the shop of Master Film, you can see the specific construction process, and the technician will tell you the detailed precautions, don't worry.

Just like the construction diaphragm for our master film, each technician will be very professional and tell you the precautions in detail.

Packed inside, because it is mainly used for heat insulation, not for rain. There is no need to remove the window glass for filming. There will be a master to help with the installation.

The film is all attached to the inside and will not affect the wipers.

The master teaches you how to attach the rear windshield, and you can save a lot of money by learning it.

Inside, of course! It won't scratch. No need to remove the windows.

Inside :) Spray some water on the inner glass, carefully paste the film, don't open or close the window for two days, and it's OK.

Sticking on the inside, so it won't hang, and the film doesn't need to remove the window glass.

It must be inside, and the glass doesn't have to be removed when the film is attached. Rest assured. No matter how bad the film is, it won't come down, at most it will be a little bubble. The better membranes don't exist.

--Suzhou Green City small staff floated by.

Generally, the film of the car paste is on the inside of the car glass, except for the film that is now modified to change the color of the film.

Because the sticker on the inside will not be exposed to wind and rain, the aging will be slower, which avoids too much external interference in the process of use, resulting in a short use time, and the sticker is not firm and causes it to fall off or have angles. If it is attached to the outside of the glass, it is sometimes easy to scratch or be easily damaged by other items.

Benefits of the film:

1. Prevent the medium and long waves in ultraviolet rays from penetrating very thick glass, and the car with glass film can isolate most of the ultraviolet rays from irradiating into the car, reducing the aging life of the car interior;

Second, there is also an advantage that the glass is explosion-proof, which is attached to the inside of the glass, but when the glass bursts in an accident, the glass film in the car can stick to the glass to prevent the glass from splashing on the body and avoid the passengers on the car from being injured;

3. Create a private space, some types of film can be seen clearly in the car, and the outside of the car can not see the inside or see very blurry, so as to retain the privacy of the owner and the safety of the car;

Fourth, the beauty of the car has been increased, and the car can be selected according to the personal favorite film, so that the car is more in line with your own personality;

Fifth, it can effectively prevent glare and reduce the situation that the eyes cannot see the road clearly due to glare factors and lead to accidents.

The above content referenceEncyclopedia - Car Wrap.

The car glass film is generally attached to the inside:

1. Be sure to cover the necessary parts of the car before applying the film to prevent liquid from seeping in. The sprayed cleaning fluid and lubricating fluid can affect the interior electronics and interior seats.

2. Inside the window before the film. Exterior surfaces are cleaned (with a focus on interior surfaces and glass sealant areas). This is mainly to eliminate the dirt or other object construction quality problems between the heat insulation film and the window glass after the film, and ensure that the film and glass can be perfectly combined;

3. Pre-cutting of the film. Use a ruler to measure the size of the front and rear windshields, and cut the membrane rubber according to the measured size;

4. Spray installation fluid. It can avoid dust spots and reduce corrosion on the edges, obtain the viscosity required for shaping and better application results;

5. Dry roasting, wet roasting shaping. First, the heat insulation film is dry baked, so that the heat insulation Liang Xian Li film can be fully pre-shrunk. In order to further improve the applicability of the heat insulation film, it is also necessary to wet bake and shape the heat insulation film;

6. Extrude the installation fluid. In the process of using the wiper to remove the installation fluid, try to scrape off the installation fluid between the heat insulation film and the car window glass, which can reduce the drying time of the heat insulation film and obtain better bonding effect, overall performance and visual effect;

7. Check after pasting. Look at the entire insulation film for dust and air bubbles, see if the corners are firmly glued, and sit in the car to see if there are any areas that affect the view (especially the front and side windshields). After the film, it is recommended not to raise or lower the glass arbitrarily within 48 hours.

Millions of car purchase subsidies.