How do you start the engine when driving an automatic car?

1. Step on the brake - ignition - gear (P to D) - release the handbrake - lift the foot brake - give oil - start, are you like this?

2. When waiting for the red light - step on the brake, the green light is on - release the foot brake - fuel - start, or - step on the brake - hang the P gear, the green light is on - hang the D gear - raise the foot brake - give fuel - start, are you like this?

3. Keep stepping on the accelerator while driving-accelerate deeply-decelerate and loosen, are you like this?

4. In the end, you never need to limit the gear, and you can slow down with brake control, is this you?

5. When overtaking, just step on the accelerator deeply and it's OK, isn't it?

6. After parking at the end of driving, hang the P gear - release the foot brake - pull the handbrake - pull the key out, right?

At first, I thought this was the right way to drive an automatic car, but this was wrong, so let's teach you in detail.

1. Start the engine and prepare for driving.

Turn on the power first (not with the engine) - step on the brakes, hang the gear, not directly into the D gear, but hang on the N gear and then ignition, and then hang from the N gear to the D gear, release the handbrake, lift the foot brake, and start. When waiting for a red light or a short time to stop and wait, the correct way is: pull the handbrake, hang N gear, not P gear!

Don't step on the brakes and keep the gear in D gear for a long time (more than 30 seconds).

2. Acceleration skills.

Pay attention to the "upshift in advance, downshift in lag" feature.

Step on the loose automatic gear shift skills, when the engine speed rises to the shift range, you only need to retract the throttle lightly, the automatic transmission will automatically make an upshift command, and at the moment you retract the engine speed will drop a little, just connected with the gear ratio of the upshift, then refuel forward, you will feel that the entire automatic gear shift process is smoother, and the ride is more comfortable.

3. When overtaking, [D gear should be used].

Release the foot that is on the accelerator and then slam it down again.

The skills of automatic transmission car overtaking are also very important, the rapid acceleration when overtaking is difficult to complete in a short time only by the ability of the transmission computer, so at this time the foot of the accelerator should be loosened, and then slammed down, so that the engine speed is rapidly increased, so as to achieve the effect of making the car quickly lift the speed.

4. When climbing, it is advisable to use S gear or manual mode

If you only use D gear, the driver will obviously feel that the car is more "meaty", you should use manual mode (one gear back), use climbing gear (low gear such as 2nd gear, 3rd gear, etc.) to climb, the car will not only run very powerful, but also more brisk.

1. The automatic transmission car only has two pedals, the oil door and the brake, of which the left is the brake, and the right is the accelerator, this order must be remembered clearly. Before starting the car, first spine the left brake pedal.

2. Insert the key and start the vehicle.

3. Check whether the car's instrument is normal. Check if there is an alarm light display on the meter. Confirm that the amount of oil in the oil gauge is sufficient.

4. Step on the brake with your right foot and lower the handbrake with your right hand.

5. Shift the gear from P to D. (Note that the right foot is still on the brake at this time) <>

6. Release the brake, move your right foot to the accelerator pedal, and press lightly.

As follows:

Press the one-button start button twice, step on the brake and then press the one-button start, release the foot brake, heat the car in place for a few minutes, step on the foot brake again, hang D gear, release the handbrake, slowly release the foot brake, and start.

The parking steps are: press the brake pedal, hang into the P gear, tighten the handbrake, turn off the engine and leave.

Automatic transmission start-up sequence (vehicles with one-button start function).

1. Without stepping on the foot brake, press the start noise button twice in a row to let the car computer system start self-test for at least 6 seconds;

2. Step on the foot brake and press the start-stop button to ignite;

3. Release the foot brake and heat up the car in situ (determine the hot car time according to different models and ambient temperatures, but avoid sudden refueling and sudden braking at low temperatures, so that the speed naturally returns to 1000 rpm on the left side base right);

4. Step on the foot brake, release the handbrake, and pull the gear from P gear to D gear (if you start on a slope, in order to prevent backward walking, you can first pull the gear to D gear, step on the accelerator lightly, and slowly release the handbrake to start smoothly);

5. Slowly release the foot brake and start;

Ignite and release the foot brake after the system self-test.

Don't step on the foot brake, press the start button twice, let the on-board computer system start the self-test for at least 6 seconds, step on the foot brake, press the start-stop button to ignite and release the foot brake, preheat the car in place, step on the foot brake, release the handbrake, pull the gear from P to D, and finally slowly release the foot brake to start.

Automatic transmission, as the name suggests, means that the driver does not need to manually shift gears, and the vehicle will automatically select the appropriate gear according to the driving speed and traffic conditions. There are generally six gears on an automatic transmission car, from top to bottom: P, R, N, D, S, and L.

Start the car, turn on the ignition system, wait 6 seconds, and let the engine self-test before starting.

Fasten your seatbelt, insert your car keys, and turn the keys clockwise while applying the brakes. Check whether the car's instrument is normal, check whether there is an alarm light display on the instrument, and then release the handbrake. Keep the brake, pull the gear from P to D, release the brake and gently press the accelerator to slowly refuel.

Automatic transmission cars can only be started in P gear and N gear, and some models can even only be started in P gear, so make sure to hang in P gear before ignition. Next steps: step on the brake - ignition - hang D gear (or R gear) - release the handbrake - release the foot brake - step on the accelerator to start

Gear description. P - Parking, Parking, Starter Gear. When you don't use the park, the gear is here, and the wheels are in a mechanical locking state to prevent slipping.

r - reverse, reverse. Used when reversing.

n - neutral, neutral. When stopping temporarily (e.g. at a red light), use this gear. Note that this gear indicates neutral gear, and to prevent the vehicle from slipping on slopes, be sure to apply the brakes.

D - drive, forward gear, also known as drive gear. Needless to say, when moving forward, use this gear. If it is hung to "D", it can automatically go up to fourth gear; When you feel that the speed is too fast downhill, you can leave D gear unloaded.

L-Low, low gear. When going down a hill or going down a long-distance slope, hang the gear here, which can limit the gear of the car to automatically only be in the lowest gear (equivalent to the first gear of the manual transmission car), which can make the car use engine power to brake when going downhill, and the driver does not need to step on the brakes for a long time to cause the brake pads to overheat and cause danger.

S - Sport, which means sports mode, when this gear is engaged, the gear can be switched freely, but the timing of the shift is delayed, so that the engine can maintain high rev for a period of time, so that the power of the car increases. Obviously, this gear will increase fuel consumption.

OD - OD gear is a speeding gear, which is used at high speed to achieve the purpose of fuel saving.

The correct steps to start an automatic car, many people have done the wrong thing before.

The correct starting method of the automatic transmission car.

Automatic transmission start: 1. Complete the self-test with the power supply first; 2. Step on the brake and hang N gear; 3. Ignition; 4. Hang from N file to D file; 5. Release the handbrake, lift the foot brake, and start.

According to the specific problem type, the steps are disassembled, the cause is analyzed, the content is expanded, etc.

The specific steps are as follows: The main reason for this is ......

Start the automatic transmission car correctly: 1. Insert the key in the lock position and do not twist it first, and wait for about 2 seconds. Twist the key can directly stop in the ON position through the ACC position and wait for about 5 seconds, then you can hear the sound of the car, which is the situation of the car computer booting up to detect each equipment, oil mercury pumping, etc., so you have to wait for a few seconds to wait for the computer work to be completed;

2. Also make sure that the car gear is in P or N gear. Of course, you can't fire in other gears. Only P and N can be fired. (The manual transmission of the car is any beam slag, any block can be ignited) at this time the tachometer pointer is stationary;

3. After waiting for about 5 seconds in the ON position, twist the key to the start position to ignite, the ignition time should not be too long, preferably not more than 3 seconds, let go immediately after hearing the car engine start, and let the key automatically return to the ON position;

4. Do not operate immediately after the engine starts, or wait for about 30 seconds to warm up, this is mainly determined by the temperature, the time to wait for about 10 seconds in summer can be late, and it is necessary to wait for 1 minute or more in winter, if it is not good to judge, look at the tachometer, the most ideal is to wait for the tachometer pointer to drop below 1000 rpm;

5. When the slag is excited, he stepped on the foot brake and pushed the gear to D gear. Then release the handbrake, and then slowly release the footbrake, the car drives forward, if it is pushed to R gear, the car is driven backwards. This is the ideal starting step for an automatic car.

Millions of car purchase subsidies.

The following is how to start an automatic transmission car: 1. Insert the car key, no need to step on the brake, and rotate the car key clockwise to turn on the power supply. 2. After waiting for the vehicle self-inspection to be completed, first make sure that the gear is in P or N gear, and step on the brake.

3. Turn the car key clockwise again to start the vehicle, and the sound of the engine starting will be heard. The following are the precautions for driving automatic cars: 1. Do not hang P gear at traffic lights:

Driving in the city road will often encounter traffic lights, and when waiting for traffic lights, you need to flexibly switch gears according to the time of traffic lights, and avoid the phenomenon of hanging P gear, when in P gear, the gearbox is in a locked state, although there will be no slipping phenomenon, but if a rear-end accident occurs, it will cause a huge impact on the gearbox, and in serious cases, the car gearbox will be scrapped, it is recommended to wait for the red light for a long time to hang N gear, pull the handbrake. 2. Automatic transmission tells the potato not to slide in neutral gear: Neutral sliding is a lot of car owners in order to save fuel and operate, it is not recommended that automatic transmission cars use neutral sliding, neutral sliding fuel-saving effect is not obvious, but also in the process of empty-handed skidding will cause the transmission oil lubrication effect to decline, long-term neutral sliding will cause wear and tear on the gearbox, balance elimination in the event of an emergency, the braking distance will be lengthened, driving safety is not guaranteed.

3. Do not switch gears when the car is not stopped: the manual transmission car will appear abnormal transmission noise when the car is not parked when it is hung into the reverse gear, although the automatic transmission car will not have abnormal noise, but it will also cause damage to the gearbox, so the vehicle should not switch gears in the case of not stopping, and it will cause damage to the gears in serious cases. 4. Reasonable preheating of the vehicle:

A reasonable hot car can make the engine have sufficient lubrication during operation and improve the power output of the engine

Automatic transmission steam branch infiltration car start steps:

1. After the driver sits in the driver's seat, he does not need to step on the brakes, press the start button directly, the ACC light is on at this time, and then press it more, and the vehicle will conduct a self-test at this time.

2. Step on the brake and press the start button again to start the ignition. Under normal circumstances, the engine will start within 3 seconds of pressing the ignition switch, if the engine is difficult to start, do not start frequently, let the starter rest for a while every 5 times to avoid burning out the starter.

3. Release the foot brake, you can choose to heat the car in situ, the time can be determined according to the environment, you can see the water temperature gauge on the instrument, when the water temperature of the stool reaches and stabilizes at about 90 degrees, it means that the hot car has been completed.

4. Step on the pedal again, hang D gear, and release the handbrake (the electronic handbrake directly short-press the button). Before starting, look in the rearview mirror to see if the road conditions are suitable for starting, and also honk your horn and turn signal to alert other vehicles and pedestrians.

5. Slowly release the foot brake and start; You should enter the road quickly after starting and drive at the prescribed speed.

Pacific Automobile Network] Start the automatic transmission method steps: 1. Start: Get on the car and insert the key, turn the key to the second grid of ignition, and wait for the system self-test to be completed.

2. Gear shifting: step on the brake and pull the position of the gear lever from the P gear to the N gear. 3. Loosen the brakes

Slowly release the brakes and slowly start the car's engine. 4. Step on the brakes: gently press the brakes with your feet, then pull the gear lever from N gear to D gear, release the brakes, and gently step on the accelerator to start.

An automatic transmission car means that there is no need to manually change gears when driving, and the vehicle intelligent system will select the appropriate gear according to the driving traffic conditions and speed. So how does an automatic transmission car start? Here's how to start an automatic car:

1. Insert the car key, do not step on the brakes, and turn the car key clockwise to turn on the power supply. After the vehicle self-test is completed, check the gear in P or N gear, press the brakes, and rotate the car key clockwise again, at which time the engine starts sound.

2. For the model of one-button start, do not step on the brake when starting, press the one-button start to turn on the power supply first, and also wait for the vehicle to step on the brake chain after the completion of the self-test, and press the one-button start again to start the vehicle.

It should be noted that before the vehicle starts, it is necessary to ensure that the gear is in N gear or P gear, and when starting, it is necessary to play the rough slip light of the left turn direction shed, closely observe the condition of the left rearview mirror and the road ahead, and under the condition of ensuring safety, step on the brake and hang into D gear, release the handbrake and foot brake, and slowly refuel to start.

Photo by Pacific Automobile Network Q&A).