What is the experience of purchasing and maintaining faucets?

Purchase tips to give you a few useful and concise: 1. Turn the handle: feel light and good 2. Look at the appearance:

The coating should be as bright as a mirror 3, to test the book: the quality is more *** 4, to test the book: the quality is more *** 5, recognize the brand:

Choose a brand, after-sales service is more guaranteed (as for those brands, you can go to the "Chinese Kitchen and Bathroom Network" to check).

As for maintenance, there are also a few: experience 1: ask experienced and qualified professionals to install.

Lesson 2: Closing the faucet is not necessarily tight Many people are used to deliberately turning off the faucet tighter after using the faucet, which is very undesirable. Instead of preventing water leakage, this will cause damage to the sealing valve and cause the faucet to be closed loosely.

Tip 3: Avoid rust and wipe the surface of the faucet clean after use; Then there are faucets that are generally more prominent, so be careful not to bump or press it when holding and placing items.

Lesson 4: If the water pressure is not lower than that, if you find that the water output is reduced, it is possible that the faucet is blocked. The solution is to use a wrench to gently unscrew the faucet screen cover at the water outlet of the faucet, clean the impurities and then carefully install them, and generally can be restored to the original.

Water is an essential resource in our daily lives, and the tap is one of the main tools we use to obtain water. Many people think that the function of the faucet is to turn on and off, and they don't need to care too much, and the progress of modern manufacturing technology has greatly improved the quality of the faucet. In fact, the faucet also needs to pay attention to maintenance, the correct use of the faucet is related to the quality of the water and the service life of the faucet.

1. Cleaning during installation.

1) When installing the faucet, try not to bump with hard objects to avoid damaging the surface material, and do not leave cement, glue, etc. on the surface, which will reduce the gloss of the surface plating.

2) Before installation, it is necessary to remove the debris in the pipeline and install the faucet; After installation, clean the dust on it with a towel and finally wipe off the moisture.

2. Clean the screen cover.

After using the faucet for a period of time, it is unexpectedly found that the water output seems to have decreased, there should be a blockage, you can gently unscrew the screen cover at the outlet of the faucet, clean the impurities on it, and check it regularly in the future.

3. Place the potato stove in the pipe.

1) The metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and when not in use, do not coil it on the faucet, which can easily cause pipe damage.

2) When in use or not in use, do not form a dead angle at the joint position of the hose and valve body, and try to keep it in a relaxed state to avoid pipe breakage or damage.

4. Water travel such as faucet switch maintenance.

1) Don't use too much force when opening and closing the faucet, and you can't switch it to the end at one time, you should turn it gently along the trend, which requires a certain amount of time to buffer.

2) The traditional faucet can not be wrung to death with great force, do not use the handle as a handrail, and do not close the faucet too tightly, otherwise it will not prevent water leakage, but will cause damage to the sealing valve.

5. Surface stains.

1) Use your hands to turn on and off the faucet, no one can guarantee that your hands are clean, if not, the stains on it will stick to the faucet handle, and you will not be able to see it for a while.

2) When the accumulation reaches a certain level, it is necessary to clean the faucet and use detergent to avoid the inconvenience caused by use. Restore the avoided shine.

The above is a specific introduction to the maintenance method of the faucet, and you can refer to the above introduction to maintain the faucet in your daily life. Although the faucet is not expensive, even if it is broken and replaced with a new one, it is not much money, but the correct use of the faucet and daily maintenance can greatly improve the service life of the faucet, and more importantly, doing a good job of daily cleaning can make the water quality of the faucet better, which is also a great benefit to health.

All kinds of impurities in the pipeline should be completely removed during installation. Spool damage, jamming, clogging and leakage are prevented. At the same time, the surface should be cleaned so that no residue of building materials remains.

2. For any kind of faucet products, there is no need to use excessive force when opening and closing, just gently twist or toggle. Products with a screen cover for the water outlet should be disassembled and rinsed after a period of use to remove impurities. Products equipped with hoses should be careful to keep the hose in a natural stretch at all times to avoid breaking.

3. The surface of the faucet should be gently wiped with a soft cloth (without impurities) dipped in detergent. Do not use metal wire balls or scouring pads with hard particles. In addition, do not collide with hard objects that may damage the surface of the faucet.

4. The faucet that has not been used for a long time will sometimes occur such as incomplete closing, leakage, loose handle, loose connection port, etc., which can be solved by consumers under normal circumstances. It occurs when the screw steady rise rubber faucet is not completely closed, usually because of hard debris stuck into the seal mouth, you only need to remove the handle (handwheel), unscrew the valve cover, valve core to remove impurities, and then install it as it is to resume normal use. If the ceramic disc spool sealing nozzle is not completely closed, it may be that hard debris abrasively abrases the sealing surface or the preload added to the valve core is not enough.

If it is the former, it can only be repaired by the after-sales service department or professional maintenance department of the faucet manufacturer. The latter problem only requires the user to remove the handle (handwheel) and tighten the spool slightly.

5. There are generally two reasons for the looseness of the handle (handwheel): one is that the handle (handwheel) is not tightened due to negligence during assembly, and only the fastening screws need to be tightened. The second is that the handle (handwheel) material selection is poor, which mostly occurs in the premature oxidation and corrosion of the handle (handwheel) and the valve core connection, resulting in the increase of the gap, and there is generally no remedy.

Therefore, try not to choose products with low-grade or inferior handles (handwheels).

6. In case of leakage of the faucet connection part, it is usually caused by the untightened part at the time of assembly, and only need to be tightened. Sometimes, a faucet is perfect in every way, but there is a feeling of dripping water when it is turned off. At this time, it depends on the length of the drip, whether the dripping does not stop and the number of droplets.

The longer drip times may sometimes last for minutes, totaling about a dozen drops. It is normal for the amount of water to drip out equivalent to the remaining water in the mouth of the faucet after the water source is turned off. As long as it is used properly and maintained properly, the faucet with high grade and qualified quality can be kept as good as new for a long time.

This view only represents the individual netizens of China Kitchen and Bath Network, and does not represent China-chuwei Network.

"1. When installing, the faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the surface plating luster. Pay attention to remove the debris in the pipe and install the faucet.

2. Under the condition that the water pressure is not less than 0 02MPa (that is, 0 2kgf cm2), after a period of use, if it is found that the water output decreases, or even the phenomenon of the water heater going out, you can gently unscrew the screen cover at the water outlet of the faucet to remove impurities, and it can generally be restored as before.

3. Don't use too much force to turn the faucet, just turn it gently. Even a traditional faucet doesn't require a lot of effort to wring it to death. In particular, do not use the handle as a handrail to support or use.

4. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and it should not be coiled on the faucet when not in use. At the same time, when using or not in use, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose. "

The faucet is a popular name for the water valve, which is used to control the size of the water flow and has the effect of saving water. Faucets have been updated very quickly, from the old cast iron process to the electroplated knob type.

1. Let professionals remove impurities in the pipe during installation.

Caring for it starts with installation. Brands such as Anhua Sanitary Ware provide door-to-door installation services, and let technicians clean the water pipes during installation, which can prevent subsequent problems such as clogging and valve core damage caused by impurities.

2. The surface dirt should be cleaned up in time during use.

After using the faucet, wipe the water droplets and dirt on the surface in time, wipe it with a mild detergent every day, and do not use highly corrosive and rough materials to clean it, so as not to cause damage to the surface of the faucet.

3. Avoid using too much force on the switch and do not hang heavy objects on the faucet.

Many people tighten the faucet for fear of leakage, but if the quality of the faucet valve core is good, the switch does not need to worry about water leakage many times, and do not hang heavy objects on the faucet to avoid damage to the faucet.

4. When the water flow becomes smaller, the impurities must be removed.

After a period of use, if the water outlet of the faucet becomes smaller, it may be a blockage problem caused by internal impurities. Remove the aerator and rinse it, clean it, and the faucet can be used again.

The above is the four-point maintenance suggestion for the faucet, you can choose a big brand such as Anhua Sanitary Ware when purchasing, saving follow-up troubles: professional installers to avoid use problems caused by installation; The surface of the faucet is well-made, with better wear resistance and corrosion resistance; The quality of the valve core and aerator of Anhua bathroom is excellent, and the service life is longer. Buy high-quality faucets to enhance the happiness of your home from the details.

When you choose a faucet, look at its quality, material, gloss. A good faucet has weight, and the gloss is better (that is, its electroplating will be finer), and its material is all copper. Then there is its spool, the spool is also very important, a good spool has a long life, you choose the product, ask clearly.

Now it is generally copper-core ceramic sheets, of course, when you buy the whole faucet, the valve core will not be bad, because he will not reduce his brand in order to save a few dollars. I'm just here to say that I won't be overwhelmed when I need it later. As for maintenance, pay attention to it at ordinary times, do not use acidic and alkaline detergents to deal with it, because the outer layer of the faucet will have a chemical reaction with acid and alkali.

I think the faucet in Fonteron *** is good, you might as well go and see, the service attitude is very good, you can consult if you don't understand, and the price is cheap?