The configuration of the switch to form a home area network is an issue

First of all, I would like to ask. What kind of broadband are you using? If you use telecommunications.

Tietong. It's easier to set up. But there is a drawback.

It is. If you want to go online, you have to pick up the cat directly, and the machine has to be on) This usage is not very stable to use. To use Netcom, you have to buy a router.

I'll tell you about it first. with telecommunications. How to set it up.

1。You have a machine that has to install two network cards. One of them is connected to broadband (the network cable that the cat comes out).

The remaining one is connected to a switch or another computer. switch, and then transfer to another computer (one computer can be without a switch, two computers can be directly connected together with a network cable.) (I used a switch.)

You can connect to several more computers). The hardware is connected like this. That's right.

Cat - Computer (Dual NIC Computer) - Computer (Switch) - Computer.

2。A computer that sets up two network cards. Right-click on this machine network neighbor, the network connection window appears, find your broadband connection shortcut in the broadband bar, right-click to select properties, click on the advanced tab, and tick the first item in the Internet connection sharing bar.

Follow the prompts. Will put. The IP (automatically) of your other network connection is changed to.

If it is automatically not changed. It means that you are not doing the right step. And then.

You click on the properties of another network connection. Fill in the gateway. Subnet masking.

Generally default. Then fill in the Tietong DNS header.

Preparing this machine (server) is considered to be a good job. The rest of the machine. You set up your IP.

Gateway. Subnet masking. DNS on the line.

IP selection. That's it. The rest.

You can fill in the same as the first machine you filled. The switch does not need to be set up. It's as if the first of these machines will prompt a restart.

You just do it. Do what I say, and it will work. Just give it a try.

No, you hi me.

How to connect with the router. Here's how to connect the hardware:

Cat – Router – Two computers.

Here's how to set it up. Simple. Just enter. Router background settings. Just dial the number. Generally, it is entered in the IE address bar. I entered. Let's take a look at the routing manual. Remember to buy a route to buy Netcom exclusive one.

What type of switch does it have and does it have a routing function?

Or share a network card,

The method of configuring a LAN with a switch

This is a small switch, only a few interfaces, home is enough, in addition to other switch settings are the same as this, first look at the following figure: the back is the slot of the network cable;

This is the side of the switch, which is usually the interface of the power cord, of course, different switches may be located a little differently, but it is generally on the side.

This is the front, mainly the indicator light of the switch, etc., through which you can determine whether your network cable is connected successfully.

Let's start setting up the switch. The power cord in the figure below is connected successfully. After the power supply is successfully connected, there will usually be an indicator light on the Pope and the front.

Next, we connect the network cable, first connect the external broadband network cable to one of the interfaces of the switch, and then connect the switch and your computer with the network cable, during the connection, you can check the front indicator, if it has been flashing, the connection is successful.

We need to set up a host and fix the IP address, as shown in the figure below.

If you have one computer set up with an IP as shown above, then the IP of several other computers should also be set in the same network segment, that is, it should be set to represent any number below 255. After setting it up, let's test if it's successful, open and run and type "cmd" and then ping the command to see if the connection is successful.

<> next, let's go back to the console, which is this computer, click on Broadband connection in Network Connections, and right-click on --- Properties--- Advanced. Then set up your shared network. Once set up, the broadband connection will be followed by the word "Shared", as shown below.

That's it.

2.Set up a workgroup: change the name of the computer (enter a name yourself, each computer is different); Change the workgroup (make sure the group name is the same as home, etc., and the group name is the same for each computer).

<> Note: After connecting the computers with a switch, perform the above 2 steps on all computers.

A switch is a type of network equipment used for electrical (optical) signals**. It can provide an exclusive electrical signal path for any two network nodes connected to the switch, and can realize the common Internet access of computers. How do you build a small LAN between multiple computers?

We can use the switch to build the LAN, let's take a look at the detailed steps of the win7 system to use the switch to build the LAN.

Recommended:win7 flagship installation version of the system

1. Connect the computer switch in dormitory 6;

All computers must be the same workgroup, right-click on my computer - properties - computer name - change - settings in this;

4. Install IPX protocol, control panel - network connection - local connection - properties - install - slag type - protocol - add - nwlinkipx spx netbios;

5. Test whether the network is connected and open to run, enter cmd, and then enter ping the other party's IP to see if it can be connected;

For example, if all six machines are connected to the switch, the same IP is set up, and the lease is already a physical LAN.

The above content shared with you is the win7 system using the switch to build a local area network, after a simple setup, multiple computers can play games together, share files.

1.Network access is required for 5 connected routers, as shown in the following figure.

2.There are five types of network cable access, as shown in the figure below.

3. The five-finger WAN cable from the light cat enters a socket, and the five computers are plugged into an socket respectively, as shown in the figure below.

The first question: first of all, you have to buy a switch, now the switch is very cheap, and the specific number of ports depends on how many people you want to use. Then you have to make a wire, or you can ask the merchant directly when you buy a switch.

Therefore, the computer needs to install a network card, plug one end of the RJ45 into the switch, and insert one end into the network card. Set the IP address in the network card to 1 to 254, and the IP address of each computer cannot be the same) The subnet mask is then right-click my computer - properties - computer name, and then there is a change of the sound, the workgroup can all use workgroup and then control panel - management tools - computer management - local users and groups - users - right-click guest attribute - If you buy a router, then set up the gateway, the gateway is the router IP address, and you must ensure that the router and your computer are in the same network segment, according to it. As long as the number after your 168 is the same as the number on the router, it's fine.

Then set up DNS, users in Shanghai can be set up, and standby ones can be set so that everyone can surf the Internet together.

I don't know the second question either!

Divide several computers into the same VLAN.