Is the elevator IC card easy to use?

Convenient, if the version of the IC card is higher, you can realize the card to go directly to the resident's destination floor, and the mobile phone card can be swiped.

There is often an advertising slogan "XX elevator IC card, a good helper for property", not only can it block non-residential users from entering, but also can realize the charging function, at the same time, the benefit to residents is that IC card can pay electricity and water bills.

The IC card of Qinhuangdao prospect photoelectric elevator is connected to the floor selection switch in the car or the elevator call button outside the elevator through the DTIC series IC card elevator controller, which can realize the IC management of elevator operation charges. Through the software authorization, the user, floor, number and time of the elevator can be controlled at will, so as to achieve the purpose of scientific management of the elevator. It is very suitable for improving the existing elevator into an IC card management and control elevator, with strong confidentiality and low cost.

Product Model: DTIC

1. Prospect photoelectric elevator IC card - economical.

Configuration: Master Controller Smart Card

Main functions: 1. Swipe the card to use the elevator; 2. Shield idle personnel; 3VIP floor control 4 is easy to install, fast to debug and easy to use.

2. Prospect photoelectric elevator IC card - general-purpose.

Configuration: Main Controller, System Software, Smart Card.

Main functions: The number of uses, the time of use, and the date of use can be set for the IC card; blacklist settings; Simple outbound call system function.

3. Prospect photoelectric elevator IC card - all-rounder.

Configuration: Master Controller, System Software, Layer Selector, Smart Card.

Main functions: The number of uses, the time of use, and the date of use can be set for the IC card;

blacklist settings;

Swipe the card to go directly to the floor;

Add the function of layer selector, which can control each floor separately, and directly reach the designated floor after swiping the card;

Increase the restriction on the free use time of the elevator floor, set the IC card control system of the elevator at any time period, and immediately enter or lift the floor restriction under special circumstances;

Add the keypad password function, the user can set a password for the IC card, and you can directly enter the password to use the elevator when the IC card is not in use.

The main controller has the functions of limiting the use time and number of times of the IC card, using the floor (need to be used with the floor selector), setting the password for the main controller (with the cooperation of the DTIC software management system), automatically disconnecting from the elevator when responding to the elevator release control signal or the failure of the main controller, and restoring the original keyboard function of the elevator and the communication with the elevator motherboard.

Remarks: Each master controller can be equipped with a maximum of 8 floor selectors, and each layer selector can control 8 floors; Each card can use up to 10 elevators.

Prospect photoelectric elevator IC card to help you realize the intelligent management of the community.

It is similar to the subway and bus card, which is more convenient.

If it is a two-household structure, it can be realized to directly swipe the card into the house.

Depending on how the property is set up, some can be used at will by swiping the card, and some can only reach the designated floor, and the latter is very inconvenient.

Residential buildings are convenient, office buildings are inconvenient.

Well, now more and more people are using this, and many ordinary communities have started to use it

Elevator IC card intelligent access control system use: operation process. In normal use, the elevator controller will control the elevator, and only the cardholder can use the elevator; In addition, when the cardholder's card is a single-layer authority card, the elevator will directly register the corresponding authority layer after the user swipes the card; When the cardholder's card is a multi-layer permission card, the user can choose to press the floor button allowed by the authority on the elevator control panel after swiping the card, and the button on the non-authorized layer is still invalid.

Property personnel and cleaning staff have a premium user card, which can open all floor permissions, so that such personnel can use the elevator freely. When a visitor comes, the visitor will first register at the reception desk to receive a card with the permission to visit the floor, and then hold the card to visit; When the visit is over, return the card to the reception. Generally speaking, the elevator public floor selection button will not be controlled, so all personnel can choose the elevator public floor button when they are in the elevator car, that is, personnel do not need to swipe the card when going to the public floor.

Special circumstances. When there is a specific management need, a user card can be set to use the elevator time period, and the user can use the elevator by swiping the card during the time period, and the card cannot be swiped outside the time period. The management personnel can issue control cards for any designated floor, and after swiping the control card, the designated floor button will be unconditionally disabled, and it cannot be used even if the user card is swiped; After swiping the IC card of Duoao Elevator and the intelligent access control system control card again, the disabled floor button can be restored to use.

Because the IC card elevator control system can realize the linkage with the fire signal, after the fire signal is input, the IC card elevator intelligent control system stops working, and the elevator is restored to an ordinary elevator to ensure the emergency use of the elevator in an emergency; When the fire signal is removed, the IC card elevator intelligent control system will automatically operate and control the elevator. And when the elevator is overhauled, the IC card elevator control system can be manually disconnected by the power switch installed in the elevator car driver's box, and when the elevator is overhauled, the IC card control state is manually turned on.

It is the elevator running straight up and down the outer side of each floor with a button, divided into up and down arrows, want to go to the top press, want to go downstairs press, the button light is on and wait for the arrival of the elevator, the light is off the elevator door open, go in and press the number of floors you want to go, and then press the close button, which is a button against the two arrows, and when you want to open the door, press the button that separates the two arrows, and the door opens. There is also a kind of button outside is the same as the number of 0 to 9 with the ** keyboard and the * Jian and key, which are generally parallel elevators, Schindler elevator is designed a lot, first press the number of the floor to wait for the arrival of the elevator, the one who comes to open the door will go in OK and wait for the elevator to open the door There will be voice prompts inside, if you go to the floor of more than ten digits, press one, the number on the ten, press * Jian and then press, press the key on the single digit, and finally press the key. For example:

28 layers can be pressed 2*8. There is no numeric keypad operation inside the elevator (inside the car). Escalators are generally seen in shopping malls and supermarkets and other places, there are steps, step up to stand on the right side, the left side is the emergency channel, you can go up again, hold on the black belt on both sides, run to the end along the speed of the elevator, step down.

Moving sidewalks, mostly seen in supermarkets, with a shopping cart, no steps is a ramp, generally relatively longer, the same usage as the escalator, more than the escalator function is to transport the supermarket's shopping cart, the design is the shopping cart on it, you can automatically card the owner does not need to deliberately drag or push.

With the improvement of people's living standards, the use of elevators is becoming more and more popular. However, there are more people who take the elevator every day, and it is inevitable that there will be idle people in and out of the building, which will have a certain impact on our work and life, and the use of the elevator IC card will solve the problem of irrelevant personnel entering the elevator at will. Inbound call.

When the card is swiped in the elevator car, the elevator button is automatically lit or manually lit. If you do not have a card, you will not be able to make the elevator reach the designated floor. You can choose any type of function to match.

Outbound calls. When holding the elevator special card to call outside the elevator, the elevator button is automatically or manually lit, and the elevator car door is waiting to be opened. Those who do not have a special elevator card will not be able to enter the elevator.

You can choose any type of function to match. When the owner enters the unit door by swiping the card, the elevator will automatically go down to the first floor, open the door and wait for the owner to take the elevator. Outbound + inbound.

When the card is swiped outside the elevator, the elevator button will be lit automatically or manually. When the host card enters the elevator car, the elevator button will automatically light up or manually light up and directly reach the designated floor. If you do not have a card, you will not be able to make the elevator reach the designated floor.

You can choose any type of function to match.

The IC card is installed in the car, which is generally a set of systems on the control panel, and his functions are generally divided into two types: 1Swiping the card to select the floor is to select the floor you want to go to after swiping. 2. Swipe the card to enter the house, that is, the elevator will automatically go to the floor where you are after swiping the card.

In fact, the principle is very simple, I hope it can help you.

Elevator IC card.

There are two main types, one is the management card and the other is the user card. The management card is.

Elevator management. Personnel use IC cards to carry out elevator maintenance, elevator stop and other operations; The user card is to reach the designated floor by swiping the IC card through the user, and there is a touch change at the elevator door to call the elevator, and there is a swipe in the elevator car for passengers to reach the designated floor. Bad noise is known that the IC card currently used, the management card is generally inserted, and the user card is generally contactless.

Proximity cards.

There is no universal card for this.

What is a Swipe Elevator?

The elevator is the elevator that needs to be used normally after swiping the card, and the elevator is still the original elevator, but a card controller is installed to restrict the right to use the elevator, which effectively prevents the behavior of not having the right to take the elevator and improves the safety level of the community.

Is it easy to install and maintain the card elevator?

The method of converting the ordinary elevator into a card elevator is very simple, only need to install the card controller on the original elevator, do not destroy the original structure of the elevator, do not affect the original safety performance, just control the buttons on each floor of the elevator through the physical mode of complete electrical isolation, complete the intelligent management of the elevator, achieve the purpose of restricting the entry and exit of outsiders at will, the card card elevator also has a maintenance-free function, if you do not want to control the elevator or the elevator card reader has any fault, Just flip the maintenance-free switch on the elevator button connection board, and the elevator will enter the card-free state, and the owner will go out freely, which will not have any impact on the elevator or everyone's travel.

What are the benefits of using a swipe elevator?

The most direct benefit of using the card elevator is to maintain the stability of the community, the elevator is free and open before, no matter who can take the elevator into the building, so that everyone's property safety can not be guaranteed basically, it is difficult for people to rest and live quietly in the noisy environment, with the card elevator, not only the idle personnel have been significantly reduced, but also reduce the number of elevator operations, save a lot of elevator maintenance costs, and the community security does not have to patrol all day long, reducing their workload.

Property personnel can use the card to charge, the elevator needs regular maintenance, in order to ensure that the elevator can run normally, the usual maintenance costs, mainly rely on the owners to pay the elevator fee, but many residents on the first floor think that they can not take the elevator, so they refuse to pay the elevator fee, so it brings great difficulties to the property personnel's charging work, and it is also unfair to other owners, the use of the card elevator can be linked to the charge and the elevator, and the owners who do not pay the fee can not take the elevator normally, In this way, the passive charge becomes the owner's active payment, which saves a lot of unnecessary contradictions and is more fair to other owners.

There is a universal card, and the property's own is generally a universal card, which can also be cracked by a cardsmith.

It is possible to find a property.

If it's a company, the company will.

Elevator access control identification methods mainly include: card recognition, password recognition, biometrics; Elevator access control realization function: through the access control module on the first floor, realize the control of the call button of the elevator car on the first floor, call the elevator.

For example, if you take the elevator with a card, the floor that each card can reach is specified by the property management department when issuing the card.

Hope it helps.

Question: I have a building card.

Can I get a universal card?

Technically it is possible to do so, as long as your community agrees to match. Just like some community door cards and elevator truck cards are all one.

No, but you can set it up as you wish.

No, it needs to be configured according to the cell.

IC card depends on the technology of different manufacturers, theoretically all IC cards can be copied, but the IC card of Gaotuo Technology is in the form of a rolling code, if you copy the card, then only one copy card and the original card are available, this is now more advanced technology, if you want to completely copy Du Qing and absolutely copy, then directly use the CPU card.

The mobile phone supports the NFC function, after the function is turned on, the elevator card is placed in the NFC induction area of the mobile phone, click save after the successful induction, and then call up the read card information and put it in the elevator card induction place.

The A card you said is the original card, and the B card is the duplicate card. If you copy it with a UID card, it can be understood as exactly the same. Therefore, when the A card fails, the B card will not be used in a disorderly manner.