What should I do if my Apple 6 is out of battery and can t enter flash mode?

Preparation before flashing:

Try to fully charge the phone (at least 50%), which can solve some of the problem of battery display error.

Two modes of flashing:

DFU mode: The full name of DFU is Development FirmwareUpgrade, which actually means iPhone firmware.

Forced downgrade and downgrade mode.

Recovery Mode: The recovery mode will display iTunes and cable icons on the screen.

The difference between the two: The two biggest differences are that the DFU mode does not boot the Mac OS system, and iTunes cannot decide the iPhone.

Whether the recovery process is interrupted because the system does not boot and the related services cannot be enabled, all can avoid many problems. Another, it is said.

The iPhone restored in DFU mode is more thorough.

iPhone6 flashing machine can't enter normal mode solution:

Step 2: Connect your Apple 6 to your computer with a data cable.

Step 3: Press and hold the power button of Apple 6 first, and slide to power off when the shutdown interface appears.

Step 4: Then please press and hold the power button to turn on, then the Apple logo will appear on the screen, do not release the power button.

Step 5: Then press and hold the home button on the home screen until the screen goes black.

Step 6: When the screen is black, please release the power button and the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode

Step 7: Press and hold the "Shift" key on your keyboard, click "Recover", and select the corresponding firmware to restore the system.

Click on restore firmware in iTunes, don't click on update, if it doesn't turn on after restoring, then it's likely to be a hardware problem

The following table describes how to fix the problem if the computer fails to boot due to the upgrade

After the iPhone6 upgrade fails, there will be a screen prompting to connect iTunes, at this time, just follow the prompts to connect iTunes;

Once iTunes is connected, your iPhone 6 will be restored automatically.

Other reasons why iPhone6 won't turn on and solutions:

The reason may be that the battery is running out and it can't be turned on.

Don't think that when you connect it to the power supply, you can turn on it normally when it is charging. However, if you use up all the battery charge, the charge will need to be charged to 5% before it can turn on properly.

If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

If the above operation method does not work, at this time we can also connect the phone to the power supply, and then press the power and home button on the home screen at the same time to see if it can be turned back on.

Solution. Press the Home button and hold it for 6-8 seconds to quit any program that can get your iPhone stuck.

Try long pressing the power on and off button, if it can restart, this is the best.

If that doesn't work, try pressing the home and hibernation wake buttons at the same time and holding them for about 10 seconds to force the shutdown.

If the above methods don't work, you can try to connect to your PC and use the [Restart] function in PP Assistant, iTools and other tools.

Apple 5 mobile phone is not as wide as the power can not be flashed, before flashing to ensure that the power is more than 70%.

Flashing method: Step 1: Connect your iPhone to a data cable, open iTunes, and make sure that your iPhone and iTunes are connected.

out of the PC suite) and then run it into the DFU directory.

After that, the iPhone will automatically enter DFU mode, commonly known as white screen flashing. The reason why DFU is used is because when flashing the machine with a white screen, it is not limited by the version, and it can be upgraded and downgraded at will and reduce unknown errors.

Step 2: At this time, iTunes will pop up the need to recover, press the shift key, click Recover, pop up a dialog box, and select the firmware you just said. Then iTunes will automatically flash your iPhone.

The whole process takes about 8-15 minutes.

Step 3: Once the restore is complete, your iPhone will automatically restart, and iTunes will prompt you to wait for 15 seconds. When your iPhone boots up, the screen will show you the screen that needs to be unlocked, and iTunes will also show you.

Step 4: Open and run the one-click to break the morning solution. bat on it, fully automatic cracking + multi-Chinese package + some patches. Halfway through the iTunes prompt, you can ignore anything, until the iPhone appears on the globe screen, and the flashing is successful.

After the forced shutdown is turned off, plug in the charger, plug in the socket, and let the mobile phone stay in the white apple interface. In addition, the flashing machine is to be connected to the computer, and it will rush into some and stare at the electricity, so there will be no problem of no electricity.