How to enter recovery mode on iPhone

There are two recovery modes, one is called DFU mode and the other is recovery mode.

The full name of DFU is Development FirmwareUpgrade, which actually means the forced upgrade mode of iPhone firmware. In recovery mode, iTunes and cable icons will be displayed on the screen.

Enter Recovery Mode Steps:

1. First of all, disconnect the data cable. Turn off your iPhone.

2. After shutting down, press and hold the home button to stay still, connect the data cable to the computer, and release the home button to enter the recovery mode successfully. Once iTunes is connected, it will likewise prompt that it has entered recovery mode.

Steps to exit recovery mode:

Press and hold the home button and the power button at the same time until the white apple logo appears on the screen.

Android mobile phone engineering mode, specific method: turn off the phone, and press the power button + volume up button (some mobile phones are the volume down button) until the phone is turned on, and the following options will appear:

reboot system now: Reboot the system.

Wipe Data Factory Reset: Wipe data to set the factory mode.

The volume button is the cursor selection key, which can be used to move the cursor, and the power button is the confirmation button

Select Wipe Data Factory Reset, OK, and then select YesOK.

**Numbers, text messages, and non-bring-your-own apps will all be cleaned up].

Then go back and select Reboot System Now OK until the phone boots up normally. (wait a few minutes) and the problem is solved.

The steps are as follows;

Connect iTunes, turn off your iPhone, press and hold the Home button and the Power Off button at the same time for 10 seconds, release the Power Off button, continue to press and hold the Home button until you see the device recognized in DFU state on the computer, after the computer prompts, release the Home button, select the recovery option button on iTunes, and click Confirm Recovery in the pop-up selection box.

3.Next, iTunes will pop up a page prompting that everything will be erased, and it will also verify the recovery with Apple servers, when the verification and extraction of files are completed, iTunes will automatically reinstall the **good firmware version for the iPhone, wait for the installation to be successful, and reactivate the iPhone.

The so-called recovery mode is the engineering mode when flashing, and there are two ways to enter:

Enter Method 1 (Official Recovery Mode): In the shutdown state, the volume up + home + power button After the first interface appears, press the volume up to enter.

Go to Method 2: Restart your phone and select Recovery Mode.

Added: Use the power button to confirm in recovery mode, the back button to return to the upper level, the volume button to move up and down, and reboot to reboot the phone.

Method steps.

1. First of all, disconnect the data cable. Turn off your iPhone.

2After shutting down, press and hold the home button to stay still, connect the data cable to the computer, and release the home button.

3. Recovery mode is entered successfully. Once iTunes is connected, it will likewise prompt that it has entered recovery mode.

Exit recovery mode.

4. The method is very simple, press and hold the home button and the power button at the same time until the white apple logo appears on the screen.

Press and hold [Volume Up], [Home Button], and [Power Button] at the same time in the shutdown state, and wait for the screen to light up before you can release it and enter Recovery mode.

First, press and hold the phone at the same time, and wait for the software to enter fastboot mode.

After entering fastboot mode, then use the volume keys to select the recovery option, and the phone enters recovery mode.

Recovery mode iTunes no response, call the phone into DFU mode and flash again, the steps are as follows:

1. When your iPhone is turned off, connect it to the computer with a data cable and open the computer's iTunes software.

2. Press and hold the power button for 2 seconds.

3. Press the home button for 10 seconds without letting go of the power button to force the power button to shut down.

4. Don't let go of the home button, press the power button 1 time. Keep the Home button for about 15 seconds, and the phone screen will display the connection iTunes icon information to enter DFU mode.

5. The computer has a sound and text message prompting that new hardware has been discovered, and iTunes prompts that there is an iPhone that needs to be restored. Click Restore and iTunes will automatically flash the latest firmware update.

The specific steps are as follows:

First, press the power button on your iPhone6 until the power off slider appears on the screen.

2.Then the shutdown slider will appear on the screen, and we need to slide it to power off.

<>4.After that, please follow the steps of the following operation to operate suddenly, if it doesn't work once, you can try several more times:

1) Press the power button first to power on, when the Apple logo will appear on the screen, don't release the power button.

2) Press and hold the home button on the home screen again until the screen goes black.

3) When you see a black screen, release the power button and continue to press and hold the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode.

<> that's how to set your iPhone into recovery mode.

iPhone into recovery mode method:Tool Raw material: iphone.

1. Find and open the Settings app on your phone.

2. Find and enter the "General" option in the "Settings" app page.

3. Then at the bottom of the "General" page, you will be able to find the "Restore" option.

4. Here you can find all kinds of reset settings, such as resetting all settings, erasing all content and settings, and restoring network settings.

Wait. <>

5. Here you need to check "Erase all content and settings".

6. Select "Erase Now" in the prompt box according to the prompts to let your phone enter recovery mode.

7. Enter the lock screen password according to the system prompts, and after passing the verification, you can restore the machine to factory settings.

The phone has a function option to do a factory reset, press and hold the power key + volume key (+ enter recovery mode. Because of the different brands of mobile phones, the method of entering the recovery mode may be different, it doesn't matter, just search on the Internet to know that after the phone enters the recovery mode, click to clear all data (double clear), or you can directly click all the options related to the cleanup.

1. Tap the settings of your iPhone.

2. After entering the settings interface, click General.

3. After entering the general interface, scroll down.

4. The general interface goes down to the last column, there is a restore, click restore.

5. After clicking Restore, the second item is to erase all content and settings, click this option.

6. After clicking, an interface for password entry will appear, enter the password set. This step is designed for the user settings of the Apple mobile phone with a password, if the Apple mobile phone does not set a password, this interface will not appear, and you will go directly to the next step.

7. A dialog box pops up that says Erase iPhone, and it says that this will erase all ** and data, and restore all settings. The words erase the iPhone are written in red font and are very eye-catching, because once you press OK, you can't restore it. If you really need to restore to the original state of the factory, please click here.

Method steps.

Press and hold the power off button and the home button at the same time for 10 seconds to force the shutdown and restart.

Please click Enter a description.

After pressing and holding the power off button and home at the same time, wait for the phone to go black and let go of the power button.

Please click Enter a description.

Just press and hold Home, connect your computer iTunes, and select "Restore iPhone".

Please click Enter a description.

Please click Enter a description.

Hold down the Shift key and select "Restore iPhone" to select the firmware you need.

Please click Enter a description.

It is summarized as follows. Please click Enter a description.

If the iPhone wants to enter recovery mode, we can shoot it inside, as long as we have a backup. All of them can be installed and restored.

Method 1. Shut down and restart your iPhone to get out of recovery mode.

Method two. Use Mad Master Apple Repair Master to exit recovery mode in one click.

Method three. Use DFU to get your device back to normal.

If you want to enter recovery mode, you need to click on your own settings center first, and then there is a system setting in the last column, and then find their last option to restore factory settings.

If the iPhone wants to enter recovery mode, find Restore directly in the settings, and click Restore to recover.

If you enter recovery mode, normally you should press this home button and this power button, and then press it at the same time to become this one.

Generally speaking, there is the kind of tutorial on the Internet that allows you to recover your data after you enter.

My phone doesn't have a way to enter recovery mode because this thing doesn't exist, factory reset.

In the settings, then find the general inside there is a factory reset, you have to back up your phone before setting.

There is a factory reset in the settings of the iPhone click.