The network connection is normal, and the gateway can t be found and can t be connected to the netwo

Updated on technology 2024-03-27
3 answers
  1. Anonymous users2024-02-07

    1. Unable to connect to the gateway: It means that the lightning device cannot connect to the network you selected because the gateway cannot be connected.

    2. Solution: If the "ping" function is disabled in your network or on the gateway, make sure it is enabled so that the lightning device can detect the availability of the gateway. If you set the IP manually, make sure you enter the correct gateway address.

  2. Anonymous users2024-02-06

    Summary. Hello, what is the problem of not being able to connect to the gateway? The gateway is the IP address of your router.

    Start] --Run] --Enter cmd (Enter) --Enter ipconfig release (Enter) --ipconfig renew (Enter) and see if there is no more.

    1 The network is disconnected, and you can't get on the network in this case. 2 Firewall problem, at present, this problem is also the most common problem, many friends can not go up to QQ prompt this error, as long as the setting of the fire wall can be solved. 3 virus or Trojan problem, antivirus software will be infected with the virus file isolation or deletion, this problem is likely to damage the QQ itself system must files, resulting in QQ operation is not normal, the problem is also more common, the solution is generally to reinstall the LAN problem, the exit of the LAN is restricted, resulting in the QQ connection must be opened normally, this problem is basically difficult to solve, unless the exit is open.

    What is the problem of not being able to connect to the gateway.

    Hello, what is the problem of not being able to connect to the gateway? The gateway is the IP address of your router. If the gateway cannot be connected, the network is no longer available.

    In this case, you can re-release the IP address. The steps are as follows: [Start] -- Run] -- Enter cmd (Enter) -- Enter ipconfig Release (Enter) -- ipconfig renew (Enter) and see if there is no more.

    1 The network is disconnected, and you can't get on the network in this case. 2 Firewall problem, at present, this problem is also the most common problem, many friends can not go up to QQ prompt this error, as long as the setting of the fire wall can be solved. 3 virus or Trojan problem, antivirus software will be infected with the virus file isolation or deletion, this problem is likely to damage the QQ itself system must files, resulting in QQ operation is not normal, the problem is also more common, the solution is generally to reinstall the LAN problem, the exit of the LAN is restricted, resulting in the QQ connection must be opened normally, this problem is basically difficult to solve, unless the exit is open.

    The network works. Can I open a web page?

    OK. The gateway is the IP address of your router. If the gateway cannot be connected, the network is no longer available.

    The first time I heard about it.

    on TV. You can try to check whether the gateway and DNS of the wireless network are normal, it is recommended to set all to get automatically, and then the TV restarts, it is recommended to turn off the TV, cut off the power, leave it for 30 seconds, and then connect the power supply, and restart the TV. Restarting the TV resets the system so that the system can re-recognize the wifi signal.

    It's a wired network.

    Follow the steps above.

    There is a high probability that it will work.

    I'll try. Uh-huh.

  3. Anonymous users2024-02-05

    1. First confirm whether the wireless router is configured correctly and whether the WAN port has obtained the IP;

    3. If you can dial up the cat directly, only the router can't dial. Generally, it is a router hardware failure;

    4. If you can go to wifi, you can't go on it suddenly. It is related to the router cache, you can dial the power cable behind the router and replug it, and wait until the signal indicator lights up again, and then try to connect the phone.

Related questions
7 answers2024-03-27

The above is completely invalid, the solution is to right-click on the online neighbor - properties - right-click on the local connection - select the attribute - drop down to select the Internet protocol - click on the property - choose to use the following IP address, you fill in the different numbers for the computer that shares this router 0 255), the mask does not need to be filled in by yourself, the default gateway is:. As for the DNS settings below, you can go online and check your local DNS and fill it in. Another way is to go into the router and select the running status - see the DNS server entry, which is your DNS, and fill in the DNS settings there. >>>More

10 answers2024-03-27

There is a battery on the motherboard, and the BIOS settings information until the power is off, including the time. >>>More

7 answers2024-03-27

1 Check to see if the LON light on the back of your case is on. >>>More

5 answers2024-03-27

Listen to you, you should use the dial number. You should use the cat directly on the net. No routing, only you are using your network cable? >>>More

9 answers2024-03-27

To turn on the portable hotspot, follow these steps:

1. Turn on [Mobile Data]. >>>More