The EPS light is on the steering wheel, and after a while, it will be fine, what is the problem

The EPS light is on means that the electric power steering system is faulty, and the symptoms are: heavy steering, abnormal steering noise, steering wheel shaking, poor steering wheel return ability, etc., it is recommended to go to the auto repair shop for maintenance in time. At this time, the car should be stopped as soon as possible under the premise of ensuring safety, ** seek help from a 4S shop or a professional auto repair shop, and it is best to let the trailer tow away.

It's just that the steering wheel is out of power and becomes very difficult to control. If the vehicle does not show any of the above symptoms, you can stop the vehicle and restart the engine to see if that solves the problem. If you restart the engine, you can continue driving, but you should also go to a 4S shop or a professional auto repair shop as soon as possible for inspection.

Try to avoid aggressive driving while driving.

The full English name of EPS is Electronic Power Steering, that is, electronic power steering. It uses the power generated by the electric motor to assist the motorist in power steering. The composition of EPS is generally the same for different cars, although the structural components are different.

Generally, it is composed of torque (steering) sensor, electronic control unit, electric motor, reducer, mechanical steering gear, and animal battery power supply.

When the car is driving, it is subjected to lateral and longitudinal forces, and when the lateral force is too large, the handling force is reduced a lot, and it is easy to lose control. ESP improves this, when the vehicle is unstable, based on the CPU calculation, the electronic power assist system can independently brake each wheel and participate in the management of the engine system to ensure the safety of driving.

A diagnostic computer is required to determine the cause of the failure. , 4S shop maintenance technician to answer for you,

Hello, this is your anti-slip function turned on This is an active safety feature on the car, not a fault.

Ruling out the possibility of a false alarm, if it persists, it is best to go to an outside garage to check.

ESP is the car's anti-skid system start, generally when the vehicle is about to lose control, when the wheels slip, the car computer will judge that there is danger, ESP will force intervention to ensure the stability of the body and control the slippage of the tires, to ensure the safety of the people in the car, you hit the steering wheel fiercely, there should be one side of the wheel a little off the ground, resulting in ESP intervention work, okay, don't worry.

When I was driving, I hit the steering wheel a little violently, the EPS light on the car dashboard turned on, and I turned off the engine and then restarted it and it was fine, if this is not the case, there should be no major problem.

The EPS light of the car is on, the steering wheel is heavy, this is the lack of booster oil in the power steering system, there is no power booster oil to transmit the power of boost, the system will light up the ESP light, and then the rock hunger appears to turn heavy guess the phenomenon of combustion, add booster oil, the specific operation steps are as follows:

1. Open the driver's door.

2. Pull the hood of the vehicle to open the gross return.

3. Open the hood of the vehicle.

4. Use a support rod to support the column hood.

5. Add the booster oil to the MAX line in the booster oil pot.

Steering wheel. The reasons for the sinking are: 1. Insufficient booster oil, 2. Tire pressure.

If it is too low, the nuclear potato 3, the bearing fit is too tight, and the 4. booster problem can be dealt with according to the actual situation.

1. Insufficient booster oil.

Generally, the feeling of the weight of the direction is relatively constant, if it suddenly becomes very heavy one day, or slowly becomes heavier, it may be that the steering power oil is dirty, it is similar to the engine oil, and it needs to be replaced. Or if there is less oil leakage, then there is less power, so the steering wheel becomes very heavy. In this case, it is necessary to maintain it in time, or to add and change the steering oil.

2. The tire pressure is too low.

If the tire pressure is too low, the area of contact between the tire and the road surface will increase, the friction will increase, and the steering difficulty will increase, resulting in a heavy steering wheel, which is not conducive to driving safety.

3. The bearing fit is too tight.

For each rotation of the Lee's shirt is connected to the system with a rolling bearing.

In this case, the mechanical part and the booster system should be checked, or whether the cavity has leaked oil inlet seal damage phenomenon.

4. Booster problem.

The relationship between the steering wheel and the booster is inseparable, so when the steering wheel becomes very heavy, it is likely that there are some poor circuit contacts or other problems inside the booster system, which should be repaired by the 4th shop.

Hello, the EPS light is on, which means that the direction of the electronic power assist system is faulty, and it needs to be detected by the maintenance computer and repaired according to the computer prompts. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

This is a problem with the steering machine module, and you need to go to the repair shop to check it [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Let's see what others have to say.

Hello, the computer version of the electronic direction assistance is broken, do a good job to check it, see if there is a problem with the electronic pump, I hope my answer is helpful to you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

There may be a problem with the power system, and the maintenance station adjusts the fault code to determine that it is the best problem! Have a nice ride! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

What is the reason why the ABS light is on and the steering wheel is heavy? The reasons why the ABS light turns on the steering wheel are as follows: 1. The steering knuckle arm is deformed; 2. Lack of oil or damage to the steering knuckle thrust bearing; 3. The gap between the kingpin and the bushing of the steering knuckle is too small or the lack of oil is large.

The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and transmit it to the steering shaft, which is mainly composed of a skeleton, foam, and the mounting buckle or screw hole corresponding to the main driver guessing the airbag DAB. The steering wheel is generally connected to the steering shaft by a spline, and its function is to convert the force exerted by the driver on the edge of the steering wheel into torque and transfer it to the steering shaft. When steering with a steering wheel with a larger diameter, the driver's hand force on the steering wheel is smaller.

The steering transmission shaft is used as a connector between the steering gear and the steering shaft, which is conducive to the generalization of the steering gear, compensates for the errors generated during manufacturing and installation, and makes the installation of the steering gear and steering wheel on the whole beat imitation car more reasonable. @2019

This is the electric power steering, and when it goes wrong, you turn the steering wheel and there is no power assist, so it will make the direction heavy. It is advisable to check at the repair shop as soon as possible to see if it is a sensor failure or a power assist pump failure or something else. After all, the steering wheel is the big problem.

Once there is inflexible rotation, it is easy to cause accidents.

If the EPS indicator light turns off automatically after about 2 seconds, it means that the power supply circuit of the power steering system and the control circuit of the EPS indicator are basically normal. If it keeps on, it means that there is a problem with the computer system, drive to the 4S store to check whether there is a problem with the driving computer module, and it can be done in a few minutes.

EPS is the abbreviation of English Electric Power Steering, that is, electric power steering. It is advisable to inspect the repairs.

EPS, is an electronic control system, anti-lock, perhaps the cause of the line It is recommended to check.