THE IPHONE BLIND MODE IS TURNED ON UNDER THE BLACK SCREEN TO USE THE METHOD IN DETAIL, SUCH AS HOW T

The black screen after setting the blind mode on the Apple mobile phone is caused by the wrong setting, and the solution is as follows.

1. First unlock Apple 11 and open Settings in .

2. Go to Apple Settings and click "Accessibility".

3. Then in the page that opens, click "Voiceover" in the accessibility page.

4. You need to turn on the narration function of the Apple phone first.

5. Open Narration and then click Braille.

6. Finally, on the braille page, select Set Output Input Braille form, as shown in the figure below, the setting is completed.

Turn on the switch on the right side of [Voiceover] in [Settings] - [General] - [Accessibility] - [Voiceover] on your Apple phone, and the blind mode will be enabled. When activated, VoiceOver will read aloud items on the screen to help blind people understand. The details are as follows:

1. Open the [Settings] - [General] - [Accessibility] - [Voiceover] of the Apple phone, and turn on the switch on the right side of [VoiceOver] to enter the Apple Blind Mode;

2. When blind mode is enabled, [VoiceOver] will read the items on the screen, tap once to select the item, tap twice to activate the selected item, and swipe with three fingers to scroll;

3. If you need to turn off the blind mode, you can also turn it off through [Settings] - [General Accessibility] - [Voiceover], or you can press the home button three times in a row to quickly turn off the blind mode.

Summary. Apple mobile phone 13 The method of lifting the blind mode is: 1. Press and hold the power button and the volume button at the same time until the slider bar of "slide to power off" appears, then let go of the power button, and slide your finger to the right on the slider to cancel the blind mode.

2. Press and hold the power button and the "Volume Down" button on the left side of the home screen at the same time until the slider bar of "slide to power off" appears, then let go of the power button and slide your finger to the right on the slider bar to disarm the blind mode.

The Apple phone 13 accidentally became blind mode, how to remove the black screen with only narration?

There are two main ways to get rid of kissing.

I'm sorry I don't understand, but can you elaborate on that?

Apple mobile phone 13 The method of lifting the blind mode is: 1. Press and hold the power button and the volume button at the same time, and imitate the blue until the slider bar of "slide to power off" appears, and then release the power button to prepare for disassembly, and slide the slider to the right with your finger to cancel the blind mode. 2. Press and hold the Power Wide key and the "Volume Down" button on the left side of the home screen at the same time until the slider bar of "slide to power off" appears, then release the power button and slide your finger to the right on the slider bar to disable the blind mode.

Generally, this method is the only way to succeed after a few attempts, the screen is not lit up, but your operation is still in progress, and it is not a lock screen state.

1.Press your power button once to wake up the system.

2.Touch your finger up from the bottom of the screen, and stop when you hear the voice announcement: "Unlock". The fingers stop in place.

Until it is announced: "Double-click to unlock" and you double-click in the same place. At this point, the phone will enter the password page.

3.Enter your password. Touch your finger on the screen until the number you want to enter is announced. At this point, the finger is placed in place and does not move.

Pause for one second, then double-click quickly. Just enter the first number. This is repeated until the correct password is entered, and the phone will automatically unlock.

4.At this point, the phone is already on the desktop. Also touch the screen with your finger and wait for the voice to be broadcast:

The name of the app, then double-click to select the program you want to open. The path to exit OviceOver completely is "Settings>", "General", > "Accessibility", > "VoiceOver", > "VoiceOver".

Triple press the home button and you're done.

With Siri, say: turn off VoiceOver mode, or say: Turn off Vioceover mode, it's fine.

Turn off narration with Siri and restore all settings.

Double-tap three fingers on the display to read or disable screen reading.

Triple the dots on the display with three fingers to display the screen.

First, the iPhone itself is a refurbished machine or other machine with quality problems, and occasionally there will be an unstable black screen, but it is not a damaged screen.

The second, which entered Apple's DFU mode by chance, is Apple's recovery mode.

The third possibility is that the Apple system won't boot.

The fourth is that the hardware is damaged and the screen is broken.

It needs to be sent to the Apple after-sales center for repair

Reasons for the black screen of the iPhone:

1. The boot line is abnormal.

2. The power supply circuit of the battery is abnormal.

3. The IC of the mobile phone power supply is not normal.

4. The system clock and reset of the mobile phone are abnormal.

5. There is a problem with the logic circuit.

6. Software conflicts.

In the first case, the iPhone itself is unstable, resulting in a black screen. This kind of black screen can be attributed to an unstable automatic shutdown, which is because the machine is of poor quality, resulting in shutdown for no reason. Because there is no big problem with the hardware, you can just press and hold the power button and wait for it to turn on.

The second scenario. DFU mode is the mode in which the Apple system cannot be turned on if there is a problem, while entering the recovery mode can be recovered with iTunes. But the phone is fine, and it can't be turned on because it can't be turned on because it has entered DFU mode by mistake, but it's actually very easy to solve.

You only need to press and hold the power button and the home button at the same time and wait for the iPhone to react, generally for more than 10 seconds, if there is no response for tens of seconds, the following steps continue.

How do I turn off iPhone blind mode?

1.VoiceOver has a touch focus, for example, my touch focus is on the Settings button right now, so no matter how I swipe up and down with three fingers, the screen won't scroll and I'll hear a "knock knock" sound, which indicates that screen scrolling isn't supported where I'm currently pointing.

2.The correct way to do this is to tap on any option in the middle of the screen, and you will see that the selected item has a black box, and then we can scroll the screen with three fingers.

3.Swipe up with three fingers to find "Accessibility" below, tap once to select it, and then press twice to enter the accessibility options.

4.Then, tap once to select "voiceover", and then press twice to enter the switch toggle option.

5.Next, tap again to select VoiceOver, then press twice to turn VoiceOver off.

7.In the end, we managed to turn off voiceover.

There is a voiceover that can read the screen, and you can generally press the home button three times, or you can pull it with three fingers to enter the settings, and turn it off in the general accessibility function.

Clicking the home button 3 times in a row cancels it.

Double-tap with three fingers on the screen to turn the screen reader on or off, and triple tap to turn off the screen or turn on the screen.

1. Turn on your phone and quickly double-click on the settings.

2. Find the universal key and quickly double-click.

3. Find the accessibility key and double-click it quickly.

4. Find VoiceOver and quickly double-click.

5. Double-click the switch button of VoiceOver.

6. VoiceOver mode for the blind has been turned off.

In blind mode, pressing once is to read the content aloud, and pressing twice is to select the target.

1. Tap the screen three times with three fingers in a row, and you will hear the prompt "The curtain screen is closed", which can light up the screen; 2. You can also click on the auxiliary function in the settings, select VoiceOver to enter, and finally in the VoiceOver interface, press the switch button twice to turn off the VoiceOver function.

1) Tap any option in the middle of the screen, you will see that the selected item has a black box, and then we will use three fingers to scroll the screen (as shown in the figure below).

2) Swipe up with three fingers to find "Accessibility" below, tap once to select, and then press twice to enter the "Accessibility" option (as shown in the figure below).

3) Then tap "VoiceOver" once in "Accessibility" to select it, and then press the switch twice to toggle the option (as shown in the image below).

4) Next, tap once more to select "voiceover", then press twice more to turn off voiceover.

Apple phone blind mode is off (phenomenon: black screen only with voice) (basic operation guide).

Three fingers quickly triple tap the screen - turn on the screen.

Click on the icon with one finger - select the target (black circle appears).

Quickly double-tap the target with one finger - on.

Swipe the screen with two fingers The swiping process is very fast and you need to quickly select the target (maybe it's my wrong method, but it can be used.) ）

Turn off Path) Settings - General - Accessibility - Narration.