How to turn off WPS on TP Link router, ask for guidance

Open the webpage, log in to the routing settings page, and select the menu QSS security settings on the left, and you can set the fast wireless security settings in the following interface figure. Clicking off QSS disables the WPS function.

QSS (Quick Security Setup) quickly establishes a secure connection to a wireless network card. If you have a wireless network card that supports WPS or QSS, you can quickly build a secure wireless network.

There is an option in the wireless settings, which can be turned off after logging in.

WPS Router:

WPS Router is a new Wi-Fi Wireless Security Settings (Wi-Fi Protection Settings) standard that has been introduced by the Wi-Fi Alliance, which is mainly due to the difficulty of introducing the long-standing problem of introducing wireless network encryption steps to verify that the settings are too complicated, because users often take too cumbersome steps and simply do not do any encryption security settings, which causes many security problems. WPS simplifies Wi-Fi wireless security setup and network management. It currently supports two modes:

Personal Identification Number (PIN) mode and One Button (PBC) mode.

WPS Settings:

WPS settings, i.e. Wi-Fi protection settings, can support the client, select the corresponding mode. With WPS, APs and clients can automate security settings by simply pressing a button or entering a PIN code. In some clients or routers, WPS is also known as WSC (Wireless Network Simple Setup).

The internet has been applied in various fields of the world. Network interconnection devices are an important part of the Internet, so do you know how to turn on WPS on your router? Here are some relevant information about how to turn on WPS on your router for your reference.

Method 1: Enable WPS on your router1. Enter this in the browser address bar, if you have changed it, you can use the one you have changed) Enter the router management interface, and select [WPS One-click Security Settings] in the options on the left2Set WPS page We can see that the WPS function is in the "off" state at this time.

Click Enable WPS

The 3WPS function is now turned on.

Click Add a new device

4. Select [Enter the PIN code of the device to be added].

All we need to do is fill in the PIN provided by the mobile phone in the box below.

Let's enable the settings on the mobile phone.

5Open your phone's settings and select Wi-Fi

6Turn on the wireless connection and click the settings symbol in the lower right corner.

The location may be different depending on the phone model).

7. Select [WPS PIN Input] in the pop-up list 8, then the phone will provide a PIN code, we just need to enter this number into the empty box in the fourth step.

Then click Connect

9. If the connection is successful, the phone will prompt "Connected to the WLAN network."'Indicates the name of your wireless signal.

Method 2 of enabling WPS on the router:Use the device button.

1. Repeat the first three steps of using the PIN code above, select [Press the button on the new device] 2. Click [Connect].

This is where the prompt "Connected" will be displayed.

3. On the mobile phone, you can still enter the WLAN setting interface.

Click on the symbol with one of the two arrows in the bottom left corner.

4The mobile phone and the router will be connected automatically, and we just need to wait for the prompt that the connection is successful to surf the Internet.

Method 3: Enable WPS on the routerQuickly set up a connection with one-click WPS

There is a black button on the back of the router.

It's the WPS one-click setup button.

Press it once, and if the router has a separate WPS indicator, the light will flash automatically.

On the Wi-Fi settings page of the mobile phone.

Click on the symbol with two arrows.

Wait for a while, and the phone and router will connect automatically.

As long as the connection is successful, we can surf the Internet as much as we want.

Generally, home routers will have WPS function, and there is a one-key WPS button on the back of the router, but we don't pay much attention to this function, so do you know how to turn off the WPS function of the router? Here are some relevant materials I have compiled about turning off the WPS function of your router for your reference.

How to turn off the WPS feature of your router:

2. After logging in successfully, click [Wireless Settings] in the left menu, then enter [WPS Security Settings], and finally turn off the WPS function that has been turned on by default, as shown in the figure below.

Once turned off, the WPS in the router shows that it is turned off, as shown in the image below.

The router turns off WPS method, which is introduced to you here, turning off the router WPS function will not affect the router function and WiFi network.

1.The router WPS function is turned off.

2.How to disable the WPS function of the router?

3.How does the router turn off WPS?

4.How did the router turn off WPS

5.How to enable WPS on the router?

Now everyone is using the network all the time, the network has been integrated into our life and work, the router as an important device for network connection, is the hub node connecting the internal trusted network and the external untrusted network, so do you know how to turn on the WPS function of the router? The following is some information I have compiled about turning on the WPS function on the router for your reference.

How to enable WPS on the routerEnter it in the browser, enter the main router web management page, set the basic network parameters, and make sure that you are connected to the Internet.

Switch to the wireless settings, set the wireless encryption for the main route, write down the encryption algorithm and password, and set the requirements for the secondary route later.

Disconnect the computer from the main router (both wired and wireless are disconnected), plug in the power from the router, connect the slave router (wireless connection is recommended) enter it in the browser, enter the web management interface from the router network, select "Network Parameters" LAN settings, set the IP address to, save, restart.

Enter in the browser, enter the web management interface from the router, switch to the DHCP server, close the DHCP from the router, save, and restart the slave router.

Set the IP address of the computer to be manually assigned, connect from the router, enter it in the browser, enter the routing web management interface, switch to "Wireless Settings" "Basic Settings" Check to turn on WDS, and then click Scan, wait for a while, you can see the scanned wireless AP, select the main router you want to connect to, click "Connect", wait a while to return to the "Basic Settings" interface, enter the encryption type and password of the main router noted in the second step above, and make sure that the key type entered from the route, Make sure the key is exactly the same as the main router's, then click "Save" and wait.

Set the IP address of the computer network card to be obtained automatically, then select Connect from the router, connect to the Slave router, enter the slave routing management interface, and see that the WDS status shown in the following figure is successful, which means that the WDS is successfully established, and the network of the main route can be shared through the slave route, thus expanding the range of the wireless network. Better provide stable wifi for smart devices such as mobile phones.

1.How do I enable WPS on a TPLink router?

2.How to disable the WPS function of the router?

3.How do I enable the WPS function on the router?

4.How to turn on the wps button of the router?

The router WPS function can be turned off, but it won't be good after it is turned off.

To disable WPS, perform the following steps:

1. First click to open the router settings, find the input box on the page, enter your router password in the input box, and then click to log in.

2. Then click on the "Wi-Fi" option in the pop-up page.

3. Then find the "WPS" option in the "Wi-Fi" page, and click on it.

4. In the "WPS" page, you can see the option of "Enable WPS", click the switch behind this option to turn it off to successfully turn off the WPS function.

Now is the Internet era, in order to adapt to the development requirements of the new generation of Internet network, the architecture of the router has changed dramatically, from the traditional stand-alone router to the cluster router development, so do you know how to turn off the wps of the router? Here are some relevant information about turning off WPS on routers for your reference.

How to turn off WPS on the routerAfter logging in to the router management interface, select "Wireless Settings" - "WPS Settings", as shown in the following figure

Select "Disable" and click "Save". As shown below: WPS is enabled by default, in order to maintain network security, if you need to turn it off, please select "Disable".

Specific steps for common wireless encryption: Log in to the router management interface and select "Wireless Settings" - "Security Settings". As shown below:

Select the security mode and encryption rule, enter the security key, and click Save. As shown below:

Take the ASUS AC88U router as an example:

1. Log in to the ASUS AC88U management background, enter the username and password of the router, and select Login.

2. Enter the main interface of router background management.

3. In the menu on the left, find the wireless network item and enter the wireless network function menu.

4. Find the WPS function in the function menu at the top.

5. Enter the WPS function and silver energy screen.

6. Find the item to enable WPS in the WPS screen and select OFF.

7. Then we switch the following frequency bands, select 5GHz, and also find Enable WPS and set it to disabled.