ASUS laptop boot blue screen, can t enter the desktop, press no key no response, what should I do?

Reasons and how to deal with ASUS laptop that does not respond after pressing the power button:

First of all, try the following operations: remove the battery and power adapter, press and hold the switch button for 30 seconds to discharge the static electricity, wait for about 15 minutes, and then connect the power adapter separately to power on; If it can't be turned on yet, it is the following reasons.

1) The first reason is that the power adapter of the notebook is damaged and cannot be powered on, or the battery of the notebook is out of power, and it cannot be turned on from the surface to the black screen. Solution: Replace the power adapter or fully charge the battery.

2) The second reason: the boot circuit of the notebook motherboard is faulty, such as clock, reset, power supply, MOS tube, etc., which may cause failure to boot, black screen, I O problems, unable to start the computer, black screen, etc., Solution: Send after-sales or repair shop to repair the motherboard, 3) The third reason:

That is, the video memory of the notebook graphics card is soldered, the performance of the main chip is reduced, the graphics card BIOS is disordered, and the control power supply IC is problematic, which will cause the graphics card to fail to work normally, that is, the graphics card is broken, because the graphics card is broken, it will naturally not be able to boot, and the screen will be black.

4) The fourth reason:

That is, the memory and graphics card of the notebook are oxidized, resulting in poor contact with the memory slot or graphics card slot, resulting in a black screen that cannot be turned on.

3 5 step by step reading.

The computer is plugged in, press power on, if nothing happens. Then try to change the power supply, if it can be turned on, and then it can be connected back to the original power supply and cannot be turned on, it is determined that it is a power supply problem. The problem was solved.

If there is still no response after changing the power supply, you can check the power on cable, power on button, etc. See if the power cord is loose or not connected. If it is connected and does not come loose, look at the power of the power cord

Is the positive and negative poles connected, is the position of the connection wrong or the positive and negative poles are reversed. If all of the above is not a problem, then see if there is any elasticity back in place when the button is squeezed.

If there is no problem with the above, then you can consider minimizing at this time, removing the external settings, and only keeping the motherboard, CPU, and memory modules, if you can turn on the computer at this time, the problem appears in the hard disk, removable storage, other peripherals, etc. The problem was solved.

If it still can't be turned on, then change the memory module of the same type, if it can be turned on, the problem appears on the memory module, and the problem is solved. If it is a motherboard problem, then continue to determine what is the problem with the motherboard, whether it is a virtual soldering or a broken chip or the capacitor is broken down, or the motherboard is wet or water, etc.

If the above is still not solved, consider reconnecting the CPU, open the valve, gently take out the CPU, and then gently put it back, press it, and close the valve. Boot.

If you have installed hardware and connected to other devices, you can reset the system or reinstall the system, if the situation is still the same, it is recommended to go to the service center to detect whether there is a hardware failure.

Summary. My ASUS laptop has a blue screen when it turns on, and it won't turn on.

My ASUS laptop has a blue screen when it turns on, and it won't turn on.

My ASUS laptop has a blue screen when it turns on, and it won't turn on.

1. Hello, it should be a virus, and you need to reinstall the system.

How is green.

Poisoned? Preparation: 1. A U disk (try to use a U disk of more than 8G).

2. A computer that can be used with normal networking. 3. Ghost or ISO system mirror orange link (win10 system**哗武学 win10 professional version windows10 official version** - system home). 4. In this messy page**U disk boot disk maker:

System Home USB flash drive boot tool.

Yes, it can't be launched, and it will be blue screen as soon as it is launched.

All right. After installing the socks next to the system to the USB flash drive, 2. Insert the USB flash drive into the computer, restart the computer and press the shortcut key to select the USB flash drive as the first startup item. After entering, select the first two keys to start Windows10PEX64 (Network Edition) and press Enter.

3. After entering the PE interface, click on the one-click button to reinstall the system on the desktop. 4. After opening the tool, click Browse to select the best system image ISO in the U disk. After choosing, then select the system installation of the laughing and answering area, generally Tong Tong is the C area, if the software identification error, the user needs to choose.

5. Click Next after selection. 6. Click directly to install on this page. 7. The system is being installed, please wait.

8. After the system is installed, the software will automatically prompt the heavy one to start, and pull out the USB flash drive, please pull out the USB flash drive and restart the computer to serve.

9. After restarting, the system will automatically enter the system installation interface, and at this point, the installation will be successful!

Good. Uh-huh.

Summary. Hello! This is because your computer system has been upgraded and updated, and the computer cannot work normally, you can try it.

Use the computer to force a shutdown, at startup, at shutdown, at startup. After repeating this three times in a row, the computer will enter the blue screen interface, select Advanced Options, then select Troubleshooter, select Advanced, and then select Settings, and restart the computer. Select the fourth security mode in the menu interface is the computer system.

My ASUS laptop has a blue screen when it turns on, and it won't turn on.

Hello! This is because your computer system has been upgraded and updated, and the computer cannot work normally, you can try it. Use the computer to force a shutdown, at startup, at shutdown, at startup.

After repeating this three times in a row, the computer will enter the blue screen interface, select Advanced Options, then select Troubleshooter, select Advanced, and then select Settings, and restart the computer. Select the fourth security mode in the menu interface is the computer system.

But I can't get into the normal interface.

Hello, you can take a picture of the blue screen of the computer ** and show it to me.

Hello, I've seen it. You have a problem with this computer system, so you don't see that startup setting. Therefore, you can only use the USB flash drive to reinstall the computer system, and there is no way to restore it.

Of course, you can also use the above uninstall updater to find the update package installed on the latest date to uninstall it, and whether it can enter the operating system.