The computer network connection is normal, but it can t access the Internet?

Updated on technology 2024-03-02
15 answers
  1. Anonymous users2024-02-06

    According to your description, your network failure comes and goes, first of all, don't use the router, dial directly to see if it is normal, if it is normal at this time, it may be a problem with the router, you can consider replacing the router, if you dial directly, or so, it should be a network failure, it may be a poor line contact, it is recommended to call **to your network** business, let him arrange someone to check the line.

  2. Anonymous users2024-02-05

    The normal network connection of the computer is not able to access the Internet, it may be that there is a problem with the network or the network setting of the computer, it is recommended to restart the computer to try, I have encountered such a situation before.

  3. Anonymous users2024-02-04

    The computer network connection is normal, but it can't access the Internet? You restart both the network and the computer, and look. It's really not possible to find someone who understands computers.

  4. Anonymous users2024-02-03

    The computer network connection is normal, but you can't access the Internet, so turn off the router first, and then turn it on after 10 minutes to see how it goes.

  5. Anonymous users2024-02-02

    In such a situation, detect the network card driver, there are routers and cats, unplug their power supply completely, and then plug it back in after 30 minutes, reinstall the system, and if it can't be solved, find the operator to let them overhaul it.

  6. Anonymous users2024-02-01

    In this case, it should be in the network format, and if it is normal, I suggest you switch to the network format, which should be completely without any problems.

  7. Anonymous users2024-01-31

    This means that your own network may be connected to the wrong network, which is why this situation occurs, try to see if you have made a mistake.

  8. Anonymous users2024-01-30

    The router's fiber is broken and you can't access the Internet, and its material is fragile and will affect signal acceptance.

  9. Anonymous users2024-01-29

    It is recommended that you change a network cable, if it really doesn't work, change a network card and test it again.

  10. Anonymous users2024-01-28

    It may be caused by the instability of your router or the instability of the external network.

  11. Anonymous users2024-01-27

    What should I do if the network is normal, but my computer just can't access the Internet normally? One trick to help you get it done.

  12. Anonymous users2024-01-26

    What should I do if I have a normal internet connection but can't access the internet?

  13. Anonymous users2024-01-25

    Summary. There may be a DNS setting problem, and the following is how to modify the DNS:

    1. Find the network connection and click to enter.

    2. After entering, find the "Open Network and Sharing Center" item and click to enter.

    3. After opening the Network and Sharing Center, find the "Local Connection" item and click to enter.

    4. After entering the local connection, find the "Properties" item and click to enter.

    5. After entering the properties, find the "IPv4" item and click to enter.

    6. After entering IPv4, click Use the following DNS server address, then enter, and finally click OK.

    The computer network connection is normal, but the Internet connection is not available.

    My computer network cable is plugged in and it shows that the connection is normal, why is there no network.

    There may be a DNS setting problem, and the following is how to modify the DNS:

    1. Find the network connection and click to enter.

    2. After entering, find the "Open Network and Sharing Center" item and click to enter.

    3. After opening the Network and Sharing Center, find the "Local Connection" item and click to enter.

    4. After entering the local connection, find the "Properties" item and click to enter.

    5. After entering the properties, find the "IPv4" item and click to enter.

    6. After entering IPv4, click Use the following DNS server address, then enter, and finally click OK.

    Well, thanks.

  14. Anonymous users2024-01-24

    That is, all the programs on your computer are normal, but there are some problems with the network at your home, do you see if the network fee is due?

  15. Anonymous users2024-01-23

    Hello, if the computer network connection is normal but you can't access the network, there may be several reasons. First of all, you can check whether your network settings are correct, including IP address, subnet mask, default gateway and DNS server address, etc. If you're unsure about these settings, you can contact your network administrator or ISP provider for help.

    Second, you can try restarting your router and computer, sometimes this will fix the connection issue. Alternatively, you can also try ping to see if your internet connection is working. Enter on the command line"ping "If you can receive a reply, you may be connected to the network hall normally, if you can't receive a reply, it may be a network failure or your firewall is blocking the connection.

    If none of the above fixes the problem, you can try updating your network driver or reinstalling the network adapter driver. In short, there are many possible causes of network connection issues that you need to troubleshoot. Hope mine can be helpful to you.

Related questions
5 answers2024-03-02

Listen to you, you should use the dial number. You should use the cat directly on the net. No routing, only you are using your network cable? >>>More

7 answers2024-03-02

The above is completely invalid, the solution is to right-click on the online neighbor - properties - right-click on the local connection - select the attribute - drop down to select the Internet protocol - click on the property - choose to use the following IP address, you fill in the different numbers for the computer that shares this router 0 255), the mask does not need to be filled in by yourself, the default gateway is:. As for the DNS settings below, you can go online and check your local DNS and fill it in. Another way is to go into the router and select the running status - see the DNS server entry, which is your DNS, and fill in the DNS settings there. >>>More

16 answers2024-03-02

If you confirm that it is not a virus problem, you can see whether the data in the DNS option under the IP protocol is correct, if the MAC address can not be seen, you can consider reinstalling the network card, if you do not want to reinstall the network card, you can first disable the network card and then restart the machine, and then enable the network card. If this still doesn't work, you can use 360 or software tests such as Optimizer and Master Lu to fix it.

8 answers2024-03-02

This file is a help file for the network group component, when there is a network dial-up and other problems, the system prompts that the file is missing, which actually means that your system does not have this help file, and can not immediately display the solution and suggestions of the problem, that is, this file is a help document, not an important file of the system to be used on the Internet! >>>More

11 answers2024-03-02

The process for handling broadband connection error 678 (remote computer not responding) is as follows: >>>More