Virtual Machine Internet Access Problems The virtual machine cannot access the Internet

If you have a problem with the network cable, just change it.

If you solve the virtual machine, you can go online.

The network can be set up as a bridge when installing the virtual machine.

As with host-only, this only implements virtual machines.

This problem has also been bothered for several days, the first time I installed VMware, I was able to access the Internet with a bridge, and then I couldn't get on it the next day, both times, I saw that there were many of the same situations on the Internet. I suddenly remembered that I was using a gray pigeon when I was able to access the Internet yesterday, and I had to turn off the firewall with the gray pigeon, so I can turn off the firewall today.

0 Make sure you can access the Internet on a real device.

1 Open the Windows Run window and enter Check whether several VMware services are enabled.

2 Open the windows running window, enter cmd, enter the dos window, enter ipconfig all, and you should see the network card information with words such as vmware.

3 Open VMware---Edit---Vitual Network Editor

You can see that your virtual machine is set up with those virtual network cards.4 If the virtual machine wants to connect to the network, it must share the network of the host, so if you choose NAT

As you can see from the figure, is it very similar to the NIC information displayed in step "2"?

ping then at this time you have selected nat, you can surf the Internet, if it really still doesn't work.

Choose the virtual network card vmnet8 (NAT) we just saw, your machine can access the Internet at 95%, 5% probability is a ghost event, it is not clear, if you choose to bridge the Internet (briged) then it is even more no problem, generally 100% can access the Internet.

5.In general.

As long as the virtual machine can ping the IP circled in red in the picture above, your virtual machine can access the Internet on the premise that your real machine can access the Internet.

Virtual machine installation. rar

Virtual Machine Installation Tutorial**. rar

Create a virtual machine and install the system. rar

Hello netizens, you don't need to set it too much, as long as you set the network standard to nat, you can go directly to the Internet.

If the configuration is not set, please select Bridge in the network configuration area, and then set the network in the virtual machine to be the same as your host address (except for the IP address, which is on the same network segment as the host).

You set the network card connection mode of the virtual machine to bridge mode, and click Connected, and that's it.

It should be that the network settings are not selected for nat.

The real system first dials up the Internet, and then enables connection sharing, so that several virtual systems can also be online at the same time, and there is no need to dial up to dynamically obtain the address.

Faint to death, do not dial up the virtual machine, just use the bridge or the default.

Set up virtual machine networking as a bridge.

You need to enable virtual machine network-related services, install virtual network cards, and install VMware Tools

VMware VMs can access the Internet in NAT mode.

1.Set your virtual NIC vmnet8 to automatically get the IP and automatically get the DNS server, and enable.

2.Set the "local connection" of the operating system in your virtual machine to automatically obtain IP and DNS services.

Server (In the virtual machine, right-click "Local Connection" and double-click "Internet Protocol" to see if it is automatic!) The fixed IP is also changed here! ）

3.Of course, the virtual machine's Internet access method is selected as NAT.

Right-click on the virtual machine you want to set up and select "Settings" (because there are more than one virtual one), select "Ethernet" in "Hardware", and change the network connection on the right to nat OK.

4.Click "" in the menu bar, select "Virtual Network Settings", first remove "Auto-bridging" (remove the hook), then select "DHCP" to enable the DHCP service, click "Start" application, and then turn on the "NAT" function in the same way.

5.The most important thing is that you have two services enabled: VMware DHCP Service and VMware NAT Service.

Here's how: Start --- Setup - Control Panel--- Management Tools --- Services, and make sure that the VMware DHCP Service and VMware NAT Service services are started.

In fact, the way I host the Internet is quite complicated, community broadband, self-connected to the router with homeshare** Internet access. It seems that the NAT mode is really easy to use, as long as the host host can access the Internet, a little setting, VMware can access the Internet.

1. Community broadband Internet access. You can set the network card of the virtual machine as a bridge, so that your computer and my virtual machine are connected to the same switch. If you are connected to the Internet on a local area network, you can set the IP address. 2，