After the failure of the USB flash drive reinstallation system, reloading with cabbage appeared

It is estimated that there is a problem with your system image file, so reinstall it with a different system image and take a look. If it still can't be solved, then remake the USB flash drive boot disk and reinstall the system.

USB flash drive boot disk reinstall system steps:

1. Open it, then insert the USB flash drive and select Make USB flash drive.

2. Select the system you want to install, and then click "Install this system" to enter the next step.

3. Wait for the U disk boot disk to be made, no operation is required.

4. After making the boot disk, you can first look at the boot shortcut key of the computer motherboard, and then exit the USB flash drive.

5. Insert the U disk boot disk into the computer that needs to be reinstalled, and after the computer is restarted, keep pressing the boot boot shortcut key to enter the startup item, and select the USB flash drive to start into the PE system. Open Xiaobai to start installing the system, and wait for the installation to complete and restart automatically.

6. After multiple reboots, the computer can be used normally when it enters the new system desktop.

Appears when the USB disk is installed with win7 system"decompressin error,abort"Cause Analysis Source Cover:

1. The ghost file is corrupted;

2. There is an error in the system partition.

2. Use DiskGenius or EasyBCD to repair the partition table and try to reinstall it.

3. If the above solution cannot be solved, you need to enter the BIOS, modify the connection mode of the hard disk to AHCI, save and exit, and then reinstall the system again. The specific steps are as follows:

Boot click Delete or F2 to enter the BIOS;

Find the advanced-sataconfiguration item and change the following mode to ahci mode;

Press F10 to save and exit;

Reinstall the system, steps:

Use the U Depth U disk boot disk maker to make a good boot U disk.

Win7 system image file.

Step 1. Store the prepared win7 system image package to the root directory of the boot disk of the prepared U depth USB flash drive

Step 2. 1. Connect the U Depth U disk boot disk to the computer, restart the computer and wait for the boot screen to appear, press the start shortcut key, use the U disk boot disk to enter the U Depth main menu, select U Depth Win8PE Standard Edition (new machine), press the Enter key to enter, as shown in the figure: Hail Elimination.

2. After entering the PE, it will automatically start the U depth PE installation tool, and click on the first bridge"Browse"Add the system image saved in the U disk, and then select the C disk as the system disk storage image, click "OK", 3. Do not modify the pop-up inquiry window, press it directly"OK"That's it, 4, wait for the disk to complete the formatting, will be installed win7 image file, 5, at this time you can unplug the U disk, restart the system to start the installation, we don't need to operate, wait for the installation to be completed, and finally restart once before entering the system desktop.

This is a system self-test, don't worry about it, just do it yourself.