How to flash the GT 18190N model phone

Flashing Tutorial] introduces two methods.

1) One-click flashing.

Use flashing software to flash your phone with one click, such as flashing assistant (, it's very simple, pay attention to backup.

2) Card swiping. Brush in according to the regular card swiping process, pay attention to brush the third-party REC, and double clear before flashing into the bag, battery power, and available memory!

The swiping steps are as follows:

Step 1: Import third-party recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the third-party recovery before, you don't need to flash it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button to turn on, and press and hold the two buttons until you enter recovery;

In the boot state, select "Restart", press and hold the volume button to enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes about 2-3 minutes to turn on the device for the first time, please be patient).

1.Due to the risks associated with flashing, Samsung's official website does not provide flashing software, so it is recommended not to flash your phone by yourself.

2.If the phone cannot be used normally due to system failure, in order to better solve the problem, it is recommended to bring the purchase invoice, warranty card and machine to the Samsung service center, which needs to be handled by an engineer.

It is recommended to use the flash wizard,Install it on the computer,Connect the mobile phone data cable to the computer,Enter the engineering mode,Pull out the battery,Then install the battery back,Then enter the engineering mode,Volume down + power button,Turn on the flash wizard and follow the prompts to operate,This process is purely foolish,As long as you find the corresponding model of the landlord's rom, you can open the brush!

Hello: Your phone Coolpad model 5263 has a flash package. I'll send you a link to the flashing bag that fits your phone model. Inside is a line brush bag, you need a computer to flash according to the requirements of the tutorial inside.

You can go to Settings - Sounds - Lock Screen Sounds and turn it off from there.

If you can't connect to the computer, you can take the card to flash the phone.

Each manufacturer and each mobile phone model is different, so the method of entering REC will be different, this is the main function interface of REC, reboot system now restart the mobile phone.

Wipe Cache Partition Clear the system cache, the option that must be executed before flashing, nstall zip from sdcard to install the zip format upgrade package from sdcard.

Wipe Data Factory Reset and Wipe Cache Partition Dual Wipe", yesOK after selecting Yes Wait for the cleanup to complete, select the second item and select the flash package from the SD card to flash the machine.

If you find that the flashing package cannot be read in the rec, please change the name of the flashing package to you. Wait for the flashing to complete, select the first option, and restart the flashing is complete.