What are the first level maintenance inspection and fastening operations of the vehicle?

Hello dear! Maintenance and inspection of fastening items: check the steering gear, tie rod, tie rod, and the connection and fastening of each steering arm.

Check and adjust the tightness and fixation of the air compressor, engine and fan belts. Check the braking method and brake pipeline for air leakage, check the brake fluid level height of the hydraulic brake master cylinder, and add brake fluid according to the regulations. Check the adjustment of the clutch pedal, the free stroke of the brake pedal, and check whether the fixed shaft of the brake pedal and the cotter pin are intact and reliable.

Check and tighten the connections and bolts of all parts of the whole car. Check the tire pressure and check for damage. Check the battery shell, unblock the vent of the small cover, and replenish the electrolyte.

Check whether the lights, wiring, wiper switches are complete and in good condition. Whether the speaker volume tone is normal, and whether the various meters are working well. I hope mine can help you, please set it up! Thank you!

Fasten the connection of all parts of the whole car

What are the fastening items of vehicle maintenance inspection?

Maintenance and inspection fastening operation items: Answer: Check the steering gear, tie rod, tie rod, and fastening of each steering arm.

Condition. Check and adjust the tightness and fixation of the air compressor, engine and fan rock front belt. Check the braking method, brake pipe there is.

There is no air leakage, check the brake fluid level height of the hydraulic brake master cylinder, and add brake fluid according to the regulations. Check and adjust the clutch pedal, system.

The free stroke of the moving pedal is checked to see if the fixed shaft of the brake pedal and the cotter pin are intact and reliable. Inspect and fasten all parts of the vehicle.

bit connections, bolts. Check the tire gas resistance and check the tire for damage. Check the battery shell, unblock the vent of the small cover, and replenish the electrolyte. Check whether the lights, wiring, wiper switches are complete and in good condition. Whether the speaker volume tone is normal, various instruments.

Whether the table is working well or not.

Requirements for the first level of maintenance of the vehicle: no leakage of oil, water, gas, electricity. The connection is firm, and the three filters are smooth.

The specific content of the first-level maintenance of the car: The first-level maintenance operation item (every 7500km driven) In addition to the daily maintenance work, the operation scope is centered on cleaning, fastening and lubrication, and the working conditions of safety components such as braking and steering are checked. The primary maintenance activities are as follows:

1) Visual inspection of the engine for leakage (oil, antifreeze, fuel and air conditioning system).2) Check the height of the antifreeze level and the antifreeze capacity, correct it if necessary, and conduct a pressure test. (3) Engine oil: Change the engine oil.

4) The upper and lower parts of the engine cover are lubricated. (5) Lubrication of door cover hinges and door pull belts. (6) Steering tie rod ball joint, check the clearance, fixation degree and dust cover, steering power system hydraulic pump joints whether there is leakage.

7) Transmission uranium Check the dust cover for damage. (8) Brake the friction pad and check the thickness of the friction pad. (9) Transmission main drive, shaft sheath, visual inspection for leakage and damage.

The engine and chassis need to be cleaned and free of mud, the oil needs to be cleaned, the gearbox needs to be checked, and the oil pan needs to be checked.

1. Check and adjust the ignition system to make it work normally;

2. Clean or replace the engine air filter, air compressor air filter, crankcase ventilation air filter, oil filter and fuel filter, and the filter element of each filter should be clean and undamaged, and the upper and lower gaskets should be free of defects and well sealed; Each filter should be clean and securely installed;

3. Check the height of crankcase oil level, coolant liquid level and brake fluid level and make it meet the regulations;

4. Conduct visual inspection of the crankcase ventilation device and the three-way catalytic conversion device, which should be complete and undamaged;

5. Check and tighten the connecting bolts of radiator, oil pan, engine front and rear support pads, water pumps, air compressors, intake and exhaust manifolds, and fuel injection pumps, and require that the bolts and nuts of each connection part should be tightened, and the locking pins, washers and rubber gaskets should be intact and effective;

6. Check the wear and aging degree of the air compressor and generator transmission belt, adjust the tightness of the transmission belt and make it meet the regulations. Check the liquid level and sealing condition of the steering gear, lubricate the steering universal joint cross shaft, horizontal tie rod, ball pin, steering knuckle and other parts and make them comply with the regulations;

7. Check and adjust the clutch to make its control mechanism sensitive and reliable; The free stroke of the clutch pedal is in accordance with the regulations.

Maintenance includes four-wheel alignment, engine washing, replacing brake pads, changing oil, adding fluoride to the air conditioner, checking whether the antifreeze of the water tank is below the marking, and checking whether the brake system is working properly

Hello 1. Change the engine oil.

2. Air filter, air conditioning filter, oil filter, gasoline filter.

3. Check whether the battery is in a green and good state, if not, measure the voltage.

4. Check the electrical appliances and lights of the whole car.

5. Tighten the chassis and suspension screws. Check whether the shock absorber has oil leakage 6, check whether the four-wheel alignment is good, whether the brake pad wear is within the normal range, and whether the thickness of the remaining brake pad meets the needs of use, otherwise it will be replaced.

7. Check the liquid level of each engine compartment. 8. Find a master and listen to the sound while driving 9. Replace the spark plug 10. Replace the oil and gear oil, check whether the brake shoes are to be replaced, check the lighting and electrical appliances of the whole car, fill grease with the universal junction of the whole car, check the shock absorption system of the whole car, the direction control system, the drive system, and the coolant of the cooling system is best to replace the water tank water 11. The so-called car maintenance refers to maintaining and restoring the technical performance of the car.

How much is the minimum Ferrari.