Why does my phone s traffic always drop?

If you are unable to access the Internet when using data traffic, it is recommended that you check whether some or all of the software cannot access the Internet, if some software cannot access the Internet, please click Network Assistant or third-party security management software to check whether the software is restricted from accessing the Internet.

At the same time, it is recommended to change to the wifi network to try to operate, if the problem is still not solved, it is recommended that you back up important data first, and then enter recovery (shutdown, press and hold the volume + power on button to enter recovery mode) to clear all data, do not restore data for the time being after booting, directly ** software to try whether it can be used normally.

If the landlord has not installed a program such as traffic management,It should be the unstable baseband of the ROM brushed by the landlord or the ROM itself has such a problem,The best way to solve it is to brush a stable new version of the bottom package,And then find a ROM that optimizes and uses a good reputation to brush in,Well。。 Flashing the machine.

You can do this from the Mobile Security Assistant or iButler - Traffic Monitoring - Settings - Data Saving Mode - Off.

If you turn on the data-saving mode, the program will not run in the background.

First of all, check if there is any third-party security software that restricts the mobile phone software from obtaining the network, and then set it up - mobile network - network operator - manually select the network to try it, the problem is still the signal problem, especially the 2G network, which often has the problem of network disconnection.

1. The strong interference of radio waves can cause disconnection. Since mobile communication is propagated by air waves, when some air waves interfere with the radio waves being used to a certain extent, the use of signal noise ratio drops below the standard value, and the mobile phone will automatically turn off, and the connection will appear.

2. Transmission is blocked and reflected by buildings, and the interference with the radio waves at the receiving point will also cause drops.

3. If the cross-area handover fails to be dropped, the voice channel of the user's call needs to be switched from the original cell to the new service cell, but the user of the new service cell is also random, if there is no effective voice channel available during the switch, the cross-zone handover will fail, causing the mobile phone to be disconnected. If the call is suddenly dropped, you can move it to change the position and try to avoid blind spots. Use.

The phone always automatically disconnects from the data traffic, and it is very likely that you have turned on the data limit, and the data will be automatically disconnected once the data usage exceeds a certain amount.

Solution, open the phone settings, find the wireless and network, open the traffic management after entering, enter the traffic ** setting function, turn on unlimited traffic or delete and save the number on the **limit.

Restart your phone and make sure the data switch is off? If there is still a situation where it is automatically turned on, go to the mobile phone repair shop and let the professional repair personnel take a look!

Many people will have no traffic at the end of the month, and there are also some elderly people who use smart phones but can't use data traffic, in order to avoid Android smart phones automatically, or should be brought by the traffic bill caused by the wrong touch, now let's introduce how to prohibit mobile phones from connecting to data traffic.

First of all, the easiest thing is to open your phone's console and turn off the data.

Once opened, click on Optimization Traffic.

Once you're in, find Networking Management below.

Click on Enter and find the Mobile Data column.

Click the check mark, and the cross sign will turn off the network permission of the data.

Next, when we open the browser, we will find that we can't connect to the Internet, so we can successfully restrict.

Many friends have such troubles,The genoreg of the mobile phone wifi "typodata-origin=" is very reliable,Although the ** and the game are opened,But there is a "can't get online" situation After a while, the network is good and the network is disconnected,This is repeated,The wifi of the mobile phone is often disconnected from the network,But I hate the use of "typodata-origin="Keno,What the hell is going on? How to solve it? I.

1.Set the adjustment of WLAN scanning.

Step 3: Scroll down and open the dots on a row (WLAN scan adjustment).

In which range the system will automatically switch to the best hotspot for your signal, and you don't think it's better to switch automatically, so you don't need to manually switch hotspots.

2.According to the power saving mode.

Open your phone's settings, tap Battery & Performance, and turn off the save mode after entering.

##&&image&#

In the point-saving mode, the mobile ** can automatically reduce the power of the wireless module to achieve the purpose of power saving, but in the power-saving mode of some mobile** systems, the wireless connection becomes unstable, and the wireless LAN will be automatically turned off if the wireless LAN is not operated for 10 seconds, and the wireless connection becomes unstable The line is always turned off, for example, the power-saving mode is turned on.

3.Problems with the wireless LAN setup of the mobile phone.

Open the phone configuration, touch Wi-Fi, and then tap Wi-Fi Assistant.

Please turn on the switch of smart network.

##&&image&#

In this way, if the WLAN connection is not good, you can intelligently choose the WLAN or mobile data network.

When your Wi-Fi disconnects from the internet, it can automatically connect to the data network, and automatically if the wifi is good.

We can also turn on the smart network speed switch below to intelligently adjust the priority of the current network speed.

##&&image&#

In addition, due to the change in the distance between the connected device and the WiFi signaling device, the connected device may move to a distance, in which case it is only necessary to move close to the WiFi signaling device.

In addition, please confirm whether the device software you are using automatically synchronizes the data and **, these applications are almost in the background and are ignored by users, but they occupy a lot of traffic, we can turn off the software you don't use, you can save wifi traffic.

If we set it up in this way, our mobile phone can be used more smoothly.

The above is the solution to the frequent network disconnection of our mobile phone's wifi, I hope it will help you. What do you think about this?

1. Check whether the security software has enabled the traffic monitoring limit, and the network will be automatically disconnected if the traffic exceeds the limit.

2. First open your phone's security software.

3. In the security software, select Traffic Management.

6. In the quota reminder, click when the monthly traffic exceeds the limit.

7. Disconnect the network when the monthly traffic exceeds the limit, and you can change it to a reminder with one click.

Summary. If your mobile phone cannot access the Internet normally, please check the following conditions: 1. If you do not restart the mobile phone after upgrading to 4G 5G**, you will not be able to use the Internet function normally; 2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal; 3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it; 4. After 3-5 minutes of power off, restart the phone and try again; 5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

If your mobile phone cannot access the Internet normally, please check the situation: 1. If you do not restart the mobile phone after upgrading to 4G 5G**, you will not be able to use the Internet function normally; 2. Confirm whether there is a net cover network, it is recommended that you can use it in a place with a strong signal; 3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it; 4. After 3-5 minutes of power off, restart the phone and try again; 5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, then it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

There are three reasons for the emergence of the mobile phone signal on the e-network: first, the signal at the location is very poor, and the network is forced to be reduced from 4G to 2G; The second is the problem of mobile phone settings, for example, if the Apple mobile phone turns off the 4G function in the cellular network, it can only use the e-network; The third is that the traffic is slowed down when the traffic is used up, for example, the original traffic is 20G, and after exceeding, it will be slowed down to 3G or 2G, at this time, it is the display of the e-network.

1. When the signal is not good in the position before the blindness, although 4G has been popularized now, but in some places because of the occlusion of the building, the amount of ** is relatively large and the signal of the guide hall is not very strong, and the mobile phone cannot connect to the 4G network normally, it will be forced to jump to the 2G network, and the 2G signal will be displayed as the E network. 2. Mobile phone setting problemAfter the SIM card is inserted into the mobile phone, the 4G network in the settings is turned on by default, but sometimes the function will be turned off due to misoperation, and the 4G function of the mobile phone will be limited to use the E network, and when connected to the network, there will be an arrow sign below, indicating that the data is being **. 3. There are many unlimited traffic before the traffic is used up and the speed is reduced, which actually contains traffic restrictions, such as 20G after using up the 4G network, and the speed will be limited to 2G after the book is destroyed, in this case, it will also lead to the appearance of E network on the mobile phone.

Summary. 1. Causes of failure: 1. Poor network coverage of the environment where the mobile phone is located (such as in high-rise buildings, mountainous areas, source rooms of steel structures, interference of large machinery and equipment, base station failures, etc.); 2. Caused by the loosening of the card insertion method or card slot; 3. The phone is running slowly due to too many programs running in the background or junk files accumulated in the phone's memory.

What's going on with a sudden disconnection of traffic.

1. Causes of failure: 1. Poor network coverage of the environment where the mobile phone is located (such as in high-rise buildings, mountainous areas, source rooms of steel structures, interference of large machinery and equipment, base station failures, etc.); 2. Caused by the loosening of the card insertion method or card slot; 3. The phone is running slowly due to too many programs running in the background or junk files accumulated in the phone's memory.

2. Solution: 1. Put the mobile phone card into other 4G mobile phones to test whether there will be a disconnection from the Internet, if the same problem occurs, then it is recommended to call the corresponding customer service of the mobile phone to deal with it; 2. If the mobile phone card is put into other 4G mobile phones and there is no drop, then it may be a problem with the mobile phone signal, and it is recommended to contact the mobile phone after-sales service to check the network and settings;

Summary. Hello, the reasons and solutions for frequent disconnection of mobile phone traffic are as follows: first check the network environment problem.

Check whether the network signal is too poor or unstable, and other problems cause the mobile phone traffic to be frequently disconnected; If the mobile phone still cannot be connected, you can try to switch the mobile phone to airplane mode, and then turn off the airplane mode: turn off and then turn on the mobile phone data function to check whether the mobile phone traffic can be used normally: check the traffic**Whether the remaining traffic is insufficient:

Check whether the phone is in arrears, causing frequent data disconnections.

Hello, the reasons and solutions for frequent disconnection of mobile phone traffic are as follows: first check the network environment problem. Rent inspection and wide inspection to see if the network signal is too poor or unstable, and other problems lead to frequent disconnection of mobile phone traffic; If your phone still can't connect, you can try switching your phone to airplane mode and then turning off airplane mode

Turn off and then turn on the mobile phone traffic policy to check whether the mobile phone traffic can be used normally: Check the traffic**Whether the remaining traffic is insufficient: Check whether the mobile phone is in arrears, which causes the traffic to be frequently disconnected.

Hello, the reasons and solutions for frequent disconnection of mobile phone traffic are as follows: first check the network environment. Check whether the network signal is too poor or unstable, and other problems cause the mobile phone traffic to be frequently disconnected; If your phone still can't connect, you can try switching your phone to airplane mode and then turning off airplane mode

Turn off and then turn on the mobile phone traffic function to check whether the mobile phone traffic can be used normally: Check the traffic**Weilu traffic is left, and whether the surplus is insufficient: Check whether the mobile phone is in arrears of rent and fees, which causes the traffic to be disconnected frequently.