Apple 6s,All of a sudden, you can t connect to the wireless,Someone else s can be connected to norma

1. If the mobile phone is not connected to other wifi, there may be software or hardware failures in the mobile phone, you can reset the mobile phone to the factory state to rule it out, or the mobile phone after-sales service center professionals will conduct a comprehensive test of the mobile phone software and hardware; 2. If the mobile phone is only a wifi that cannot be connected, it is recommended to use the following methods to troubleshoot: (1) There is a software error in the operation of the mobile phone, cat, and wifi router, and it is recommended to power off the mobile phone, cat, and wifi router to restart; (2) Check whether the heat dissipation and ventilation of the WiFi router are normal, and avoid the unstable operation of the WiFi router caused by higher temperatures, so that the mobile phone cannot be connected; (3) Reduce the distance and physical obstacles between the mobile phone and the WiFi router to ensure good WiFi signal coverage quality; (4) Check whether there are too many people connected to (rubbing) wifi or watching, playing, or files, resulting in excessive hardware load on the wifi router and unable to respond to your network request; (5) Check whether there is a strong source of radio interference around the mobile phone and wifi router, which affects the quality of wifi signal transmission between the mobile phone and the wifi router; (6) Some older mobile phones do not support Chinese SSID (wifi name) well, it is recommended to set the wifi name to English, save the settings, and restart the wifi router to try. (7) Check whether the WiFi router configuration has made network connection restrictions on the mobile phone or the WiFi router system firmware version is too old, and there is poor compatibility with the mobile phone, it is recommended to upgrade the WiFi router system firmware to the official latest version to try.

8) Take other mobile phones to test whether the wifi router can be connected, if it can't be connected, there may be software or hardware failures in the wifi router, you can reset the wifi router to the factory state to eliminate it, if it still fails to solve the fault, it is recommended to replace the wifi router.

It's the same with me.

The reason why the Apple 6s plus can't connect to the wireless network: network problems.

The specific solutions are as follows:

Method 1: Please open [Settings] on the home screen of your iPhone first.

Next, click "Wi-Fi" in the settings list.

Next, in the connection properties of the wireless network, please click the [Ignore this network] option, the function of this function is to delete the original connection information on this mobile phone, which is equivalent to clearing the previous connection information.

You will then be prompted if you really want to delete the wireless connection information, click [Ignore] to continue.

When you ignore the wireless network, click to connect again in the wireless list, enter the password of the wireless network, and see if you can connect normally.

Method 2: Turn off the phone and start it again.

Method 3: Restart the wireless router.

Method 4: Restore the network settings on your iPhone.

In the settings list, click General.

Next, at the bottom of the general list, click Restore.

In the restore list, click the Reset Network Settings option.

Next, click the [Reset Network Settings] button at the bottom to confirm.

You can see if the other Wi-Fi networks are working properly. If you can, it's a problem with this network, you can restart the router and try it. If other networks can't be connected, you can click Settings - General - Restore - Reset Network Settings to try.

Generally, it is a problem with the Apple system or the antenna of the mobile phone.

Solution: 1. First of all, you can try to delete the connected wireless network information, and then reconnect.

First, please open the "Settings" app on the home screen, find the "Wi-Fi" column in the settings list, and click to enter.

Next, please find the wireless network that cannot be connected to the current wireless network in the wireless LAN list, click the "Info" icon on the right, and then in the wireless LAN details list, if it is a network that has been connected before, you will see the "Ignore this network" option, click it to continue.

Then click the "Ignore" button to confirm the deletion of the original connection information. Finally, reconnect to the Wi-Fi network and see the results.

2. Or go to Apple after-sales consultation.

The problem may be caused by the iPhone system itself, or it may be caused by the wireless router changing the settings that make the phone mismatch with the network.

The specific steps to solve the problem are as follows:

2. Find the "Wireless LAN" column in the settings list and click to enter.

<>4. Then in the wireless LAN details list, if it is a network that has been connected before, you will see the "Ignore this network" option, click it to continue.

5. Then click the "Ignore" button to confirm the deletion of the original connection information. Finally, reconnect to the Wi-Fi network and see the results.

My sister has also been in this situation, so let's go to an Apple store or a mobile store.

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

Mine is also the one who can't connect to the Wi-Fi.

The second method: search for the carrier manually. If airplane mode doesn't solve the problem, you can try replacing your carrier's automatic search with a manual search. Find your carrier in Settings and click to turn it on.

Turn off the operator's [Auto] button, wait for about 10 seconds, and the name of the surrounding operator will be searched below, if it is mobile, select [China Mobile], if it is Unicom, select [China Unicom]. See if the signal has changed.

The third way: Reset the network settings. In the settings, click Restore, and then click Reset Network Settings

After resetting the network settings, the signal improved. However, it should be noted that after the restoration, the previously stored WiFi password will also be erased.

1. Remove the protective case.

In order to better protect their iPhone, most friends will put a protective case for their iPhone, but some third-party protective cases, especially metal protective cases or metal frame shells, will affect the signal of WiFi. This will cause your iPhone signal to be weaker than others. If your iPhone WiFi signal is not good, you can first remove the case and try to see if it improves.

2. Reset network settings.

It is also possible that there are some problems with the system of the iPhone if the WiFi signal is not good, and you can solve some problems by restoring the network settings of iOS. Go to [Settings] - [General] - [Restore] - [Reset Network Settings], and you can restore the network of your iPhone. You can rest assured that this restore will not reset the rest of your iPhone's data, but some of the wireless passwords stored on your phone need to be refilled.

Wait for the system to restore and restart, then try to connect to the wireless network again to see if the signal improves.

3. Upgrade the new system.

Firmware updates on the iOS system often fix various bugs and errors, and sometimes optimize and enhance this part of the network. If you don't have a good WiFi connection anywhere and are stuck in an older version, you can try upgrading to the latest iOS system. This method was used to solve the problem of weak signal before.

4. Check the router.

Sometimes the router will also have some problems with poor wireless signal after being used for a long time. In this case, you can also check the router, the back of the wireless router will generally have a factory reset button, long press to recover. After the router is restored, connect to the router's management page and reset the broadband account and wireless network.

Before restoring your router settings, remember your broadband account and password to avoid losing your connection to the Internet.

The iPhone 6S is a smartphone released in 2015 by Apple Inc. in the United States.

Problems with phone settings.

1Find the wifi settings on your phone, click Ignore this setting, cancel the original setting, and then connect to the network from a new one to see if it solves the problem.

2. Another most common method is to reset the network settings. Select General - Restore Network Settings.

3. Another way is to turn it back on after shutting it down, or you can use some of the functions of the phone to restart it and self-adjust it, so as to run normally.

Debugging of the router.

1Another reason is that the wifi chip of the iphone6 mobile phone is too advanced, that is, it is possible that the version of your wireless router cannot keep up with the version of the iphone6 mobile phone, so the router needs to be upgraded.

Some router versions can also solve this problem by upgrading, and some router versions are too low to solve this problem after upgrading.

2If upgrading can't solve this problem, then the second method is simply to change to a new router, choose a wireless router that can be compatible with the wifi chip of the Apple mobile phone, and you can also solve this problem. My phone is solved by this method.

Note: There are many reasons for problems with the phone, and the solution needs to be tried more to know which method can solve it.

Apple mobile phones are like this, wifi is unstable, I have tested it myself.

The phone suddenly can't connect to the mobile network, which is usually a problem with the phone's hardware or software settings.

If you are using a mobile Internet network:

After confirming that there is no arrears on your SIM card and that the local network conditions are normal.

1. First of all, you need to turn on cellular data, you can enter Settings - turn on the data connection<> 2. After opening, the upper part of the screen needs to display the 4G icon for Internet access, if it is not displayed, you can turn the phone on and off or off the airplane mode.

3. If you still can't access the Internet, it is recommended that you restore your phone to factory settings: how to restore factory settings: go to Settings - General - Restore Factory Settings - Restore all settings, restore all settings will not lose data in your phone.

Friendly reminder, there are certain risks in restoring factory settings, and it is recommended to carry out <> with the help of after-sales personnel

Hello, if your account can be used on the computer, and the surrounding users are normal, it means that the account is fine, the network is fine, and the rest is the problem with the settings of your mobile phone terminal.

We recommend that you troubleshoot possible terminal problems one by one

Possible reasons and solutions for mobile phones not connecting to wifi networks:

1.First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.